I have moved my horizontal alignment annotations to avoid overwrites in Plan Production, but when I modify my vertical alignment; the horizontal alignment annotations revert back to the original location. Is there a way to disassociate the PC, PI, PT…

Hello, I have a planimetric lines (Edge of Shoulder/ Edge of Pavement) dgn file created using basic horizontal offset tools from an alignment attachment, I did some changes to the alignment (removing/adding PI's) and since then the planimetric dgn is…

I have been struggling to successfully use the table editor to edit my horizontal geometry. For instance, I would like to use the editor to quickly round off the decimals on bearings. When I attempt to do this, the table editor is throwing the ahead tangent…

I have an alignment created using Complex by PI. I have some vertices that I initially created with no curve since the deflection angle was small. However, I needed to move the vertex slightly and want to add in a curve. How do I easily add a curve to…

I am currently taking as-built plans and recreating the horizontal geometry. We do not currently have the topo surveyed but want to proceed with this. I need to create and best fit together multiple as-builts out in space and then move the geometry to…

Dear All, I'm having an issue in editing horizontal alignment after convert into complex geometry. Please advise. ALEC_ST-GITT Opt 2.dgn

I used GEOPAK SS2's Cogo Best Fit tool often to best fit surveyed property pipes (specific survey points) to narrow down which pipes were the best to best fit an alignment to (see screenshot). Does ORD have a similar tool where I could specify points…

Bentley, I think you should task one of your employees to design a real project with OpenRoads Designer. Which means modeling a roadway project then after corridors are created start modifying the alignments. This includes extending alignments , removing…

I have drawn horizontal elements to form a horizontal alignment in open roads. Normally, when you select such an alignment, orange text and orange cursors appear around the element so that you can manipulate it and the alignment. However, I get no such…

I'm able to convert a single offset element to a variable offset by changing the ratio from 1:0 to 1:10 for example. However, I'm unable to revert to a single offset by entering a ratio of 1:0. I feel I'm overlooking something as it doesn't make sense…

Hello all Is there an option to create a dynamic offset string that changes as we make changes in quick horizontal design in real time (As i am also a civil 3d user there is an option "add offset alignment " in which the offset line also shifts as…

When I am trying to make an horizontal line, the line I made appears instantly in the 3D View. However when I try to make the vertical alignment and turn it in to an active profile, the profile appears right above the horizontal line. How can I remove…

I'm trying to cut cross sections of my horizontal alignment which is preloaded in an .alg file. Here's the process i follow: 1.) I "View Active Horizontal" in order to display my horizontal alignment. 2.) I click "Create Cross Sections" under the…

In SS2 I could verify the integrity of a a horizontal or vertical alignment and then be able to move the order around and change the direction of the alignment. In SS4/Open Roads I don't know of a way to do this and it would be helpful now that I have…

Its been a bit since I have posted here, so your patience is appreciated..... About a year or so ago, I had gotten my horizontal alignment stations and labels to annotate at a MS files defined annotation scale. Using the subject version, I am no longer…

Just want to know where i can find the option for creating an alignment with Spiral-Curve-Curve-Spiral. The option in Horizontal alignment is only Spiral-Curve-Spiral.

Hello, Ok, I know my subject sounds like a stupid question--why would one add a station equation if the ahead station is equal to the back station? The short answer: to (possibly) cut down on work later. Can one add a station equation to an alignment…

Hi, I am using MX Road V8i, SS2. I had problem when I am doing Horizontal alignment Design using Menu - Design/Alignment. I was trying to apply transition between Compound Curves (R1=1000,L1=172.972; R2=500,L2=80.947). Its Like CURVE1-START TRANSITION…

Hello, I have the horizontal alignment and vertical alignment created already, It is for a 30km road. Now due to the design changes, I have to modify the horizontal alignment in a certain area, please see the image below, we want to modify the horizontal…

Helo! I am a new user of InRads/RailTrack. I am working on an alignment design - in fact one of the first in RailTrack. Frankly, I am disappointed of the unfriendliness of the software – compared with the ones that I have used before. Here is…