• Design Cross Slope report values is not matching.

    I am trying to generate cross slope report @ 10 m interval by station base or station offset report but i am not getting appropriate values of cross slope in report. It seems correctly in cross-section view. Am missing something ?? Images is ready for…
  • Exporting points from InRoads to Civil 3d

    Good day all, We are having to import a topo survey we processed/cleaned up in InRoads into Civil3d per client request. We took the data from the .fwd and exported as a text file, saved as a .csv so that the points can be imported into Civil 3d. What…
  • Cross Section Annotation - Minimum Elevation Difference

    I am using Power InRoads V8i (SelectSeries 2). Is there a toggle in the cross-section annotation that would stop both elevations being displayed if they are within 0.01' of each other? The way I have my template set up, is I have a 'ditch check' point…
  • InRoads Horizontal Regression not able to produce regression points from Horz Alignment?

    Good Morning, I cannot create Horizontal Regression Points from my horizontal alignment, what are the steps in getting regression points from a horizontal alignment? I have the following horizontal alignment EX RoadwayCL And I created another…
  • InRoad XML report CrossSectionPoint element with an Attribute of "ExistingCenterline"?

    Hello, Does anyone know what makes an Evaluation Report produce a RAW xml file have a node "CrossSectionPoint" with a "Type" attribute equal "ExistingCenterline"? Obviously it is picking up the points that makeup the template at the template drops of…
  • The Tasks List in the Task Window Dialog Box is Empty

    It seems fine at the physical computer (I was using it earlier today), but when I use Bentley InRoads Suite SS4 (MicroStation SS4) through a remote connection, the top of the Tasks dialog box is bigger yet empty, not allowing me to change tasks with a…
  • InRoads Horz. Annotation of Cardinal Points

    Good Morning, See attached illustration (orange circled area). How can we place the "PC" text on the same line as the Station Text, or is it not possible? Thank you for your time,
  • No Feature Syle when Importing Surface

    I'm a student using InRoads V8i SS10. This is my first time using, and I have limited access to my professor due to COVID-19 protocol. We've been given the 3-D elements necessary to create a surface. I am attempting to do so by InRoads File --> Import…
  • Vertical alignment curves [InRoads]

    I am trying to design an underground utility pipe using InRoads. I drew out the horizontal and vertical alignments. Part of our design requires taking any vertical turn less than 8 degrees and turning it into a curve with a radius of 360'. I have to do…
  • End Area Volume - Classifications

    I am running InRoads SS4. I am trying to calculate cut but only in a certain part of the road. I have changed my template so I can ignore the components I need to in order to get that certain section. My issue is the following: there is a column in the…
  • InRoads Bridge Geometry - Create Girders

    I would like to use the InRoads Bridge Geometry tools to quickly layout girders on a tightly curved bridge. This would be a very useful tool if I could get it to work. Instead of manually drawing girder lines and checking max/min deck overhang, max/min…
  • Plan and Profile Generator / Create Profile inconsistently annotating event points for given station ranges

    Power InRoads V8i (SELECTseries 4) Version 08.11.09.904 I am having issues with event points (seemingly) randomly not being annotated on my profiles through 'view vertical annotation'. I created a set of profiles using plan and profile generator…
  • end conditions going wrong direction

    I have the cut and fill set to project to surface to the right on the right side of the assembly and a second constraint to be 3:1 grade. The issue is evident by looking at the picture but I don't know what is occurring within the template
  • Can't save the SS2 Roadway Design Ird File

    Hi, I was working on addressing the model with Inroads SS2, I updated the Roadway Design IRD file, but can't save it if I choose to Process All/ Process Visible Range. Please see the snapshot below. I try to reduce the file size to cut the road distance…
  • 3D Stationing

    Hello everyone, I will design an alignment for an oil pipeline. And the project requires 3D stationing. I found the 3D alignment task but is there a way to annotate in 3D? I am using InRoads V8i SS2. Thanks in advance.
  • Latitude Longitude Annotation with InRoads

    MicroStation version 08.11.09.292 InRoads version 08.11.07.566 With particular geographic coordinate systems assigned, the Auxiliary Coordinate System and InRoads compute latitude and longitude differently and display different results (see table…
  • Corridor Feature names

    Using InRoads V8i (SELECT series 2) V08.11.07.428 Recently upgraded to series 2. When creating surfaces in the Roadway Designer in SELECT series 1 the created features would have the corridor name prefixed to the name such as "Highway-EP_L". Now that…
  • Re: Problem starting IR from desktop

    Karl, If you installed MicroStation to the default location, go to: C:\Program Files\Bentley\MicroStation V8i (SELECTseries 1)\MicroStation\config\appl. Otherwise, go to the equivalent installation path. Do you see an InRoadsAT.cfg? Thanks…
  • Re: InRoads v8i SS1 won't install

    Robert, MicroStation V8i (SELECTseries 1) Update 1 is not a complete version. It is not listed under Enhancements and Updates because it was created specifically for a particular set of products. If you click on its link in SELECTservices, the…
  • Re: InRoads V8i SS1 - Import Surface DEM (tif?)

    Chuck, This cannot be done directly within InRoads. However, it can be done through a tool that is delivered with the InRoads installation and then converted to an InRoads DTM file. From the MicroStation menu, select Tools> Data Acquisition…
  • Inroads Storm and Sanitary FAA Regional Constants

    I am looking at calculating time of concentration in InRoads Storm & Sanitary. Using the FAA method, you are asked to give K1, which is stated as a "regional constant". Where can I find the relevant regional constants? Thanks, Jenna
  • AutoCAD platform

    Does Bentley InRoads Site V8i currently support the AutoCAD 2013 platform? If not, when is this likely to occur and is there a commitment to continue supporting progressive AutoCAD platforms in future?
  • Re: problem using software

    Bob, Bentley InRoads Suite does not include the CAD platform in the installation. You must install MicroStation seperately. If you install Bentley InRoads Suite V8i (V08.11.05), then you need MicroStation V8i (V08.11.05). If you install Bentley…
  • Contours Smoothing Method

    Hello there, I just have a simple question, is there any way that we can choose another method of smoothing of Contours in Inroads , for example in Geopak we have more than one one method of smoothing as shown below: Thanks...
  • Re: Inroads SS1 Interface

    Yes, there are some default tasks already delivered with the software. These are contained in a DGNLIB that can be modified by the user. Thanks, Jason Smithey