• InRoads SS2 Corridor Point controls interfere with targeted corridor surface

    I am having a strange problem applying point controls using Corridor Point mode for a project in InRoads SS2. I have a roadway alignment and corresponding corridor in an .ird file. I will call this corridor in the .ird "Main_Street". In the same .ird…
  • Use Feature Name Override

    When I attempt to show cut/fill construction limits in plan view, I only see the separate feature definitions for cut/fill if I'm NOT using Use Feature Name Override, with gaps in between where it is transitioning. If I DO use Feature Name Override, the…
  • Milling & Leveling & Wedging Component Quantities

    I'm trying to get component quatities for my Milling and Leveling & Wedging components. They display fine in cross sections, but when I use Roadway Designer Component Quantities they do not compute.They are "on top" of each other in the template. Could…
  • Roadway Designer - Proposed Surface Triangulating through components

    Hi, I have a some templates that I took over from around 2009 and I am having some issues with the triangulation. When creating a surface through roadway designer, the triangulation is connecting to points underneath the top components in locations…
  • InRoads SS2 Surface Creation Anomalies

    I have a 4 lane interstate with 4 ramps and some structures. I'm trying to perform the End Area Volume so that I can create the Mass Haul Diagram that the client wants. Towards the end of our section of the job is a large structure that I am trying to…
  • Roadway Template "Not in Library" ?

    New user here, InRoads V8i SS2. I have a Template Drop showing up blue and help states this is because the template is not in the library. The stations seem to be working fine, but is there a way to save this working template in the Roadway Designer back…
  • InRoads - List of Roadway Designer Stations?

    Hello, Is there a way to list (or edit the list of) the stations that the Roadway Designer has for each corridor? Going through design, you may enter an odd station for a cross-drain or look at an event point for an intersection that later gets moved…
  • Driveways in Cross Sections

    I am trying to create cross sections for a few various size corridors. I started with the simplest/shortest corridors. I have a template that is controlled by parametric constraints as to what object (curb and gutter, ditches, etc.) will appear. One of…
  • Cross Section Component Display Problems

    Hi, Using InRoads 8.08.00.46 and trying to generate cross sections. The problem is that some of the components are not displaying properly. For example, I have my Left lane component sloping the opposite direction in the cross sections or 2 curbs at different…
  • Re: Test Template Suggestion

    Please file all change requests through the following mechanism: http://appsnet.bentley.com/srmanager/addcall.aspx Thanks, Jason Smithey
  • Interchange - Model Slopes at Bridges?

    Greetings- I am running InRoads 8.09.03.06 with MicroStation 8.09.04.88. I am currently modeling an interchange. I think I feel comfortable enough with the basics, but one task that has come to mind is when I get to bridges. My roadway…
  • Re: View components

    Hi Brian, This result is the reason why we added Component Display in Plan View to Roadway Designer > Create Surface. Regards, Mike
  • Re: Interchange - Model Slopes at Bridges?

    Wow! Ask and you shall receive... very cool! Piotr, thanks for posting these videos!
  • Cross Section: proposed surface/end condition doesn't intercept existing ground

    I am using Inroads Suite XM Edition. When I create my cross sections I notice that my proposed surface, in many cases, does not actually meet the existing ground surface like it should. In roadway modeler, the section views all look correct, but in the…
  • [Inroads v8i] Superelevation sections problem

    It seems that either there is a bug or I miss something in superelevation tool in roadway designer. I use wizard (ig. table method), adding sections and solviing overlaps - the superelevation is defined. Then I want to revise my superelevation's section…
  • Roadway Designer exporting Cut/Fill reports

    Hello, need some help here. I have created a roadway off of a template and the existing surface/proposed horizontal and vertical curve. When I process it all, and click the toggle on for showing cut and fill values, it shows them in the cross section…
  • Corridor Feature names

    Using InRoads V8i (SELECT series 2) V08.11.07.428 Recently upgraded to series 2. When creating surfaces in the Roadway Designer in SELECT series 1 the created features would have the corridor name prefixed to the name such as "Highway-EP_L". Now that…
  • Re: InRoads 08.11.07.246 - transition problems

    Hi Paul! Thank you for your answer! It made us think more about point control, experiment with it and finally we came to the following result: However, the surface is no ideal as we need RD to calculate additional section at the point selected with…
  • existing surface grade filtering slopes? Any ideas?

    I am trying to find existing slope conditions along a 280 mile corridor. I need locations where a 5% and 3% slope exist within 100ft of the track CL (rail). Is there anyway that I can set up some type of filter that will highlight the area where these…
  • Re: Driveways in Cross Sections

    I had tried that in the past and didn't have much better luck but will give it a try. I wonder though what the best way to get the driveway across its entire length to match into existing with a reasonable slope and length. I have in the past picked the…
  • Templates for Roadway Designer - Cannot Edit Point in Non-Displayed Component?

    Greetings- Not sure if this is a bug or not... I am running ustn 180 and InRoads 246, but I have noticed this in a previous build of InRoads V8i also. In older versions of the template editor for InRoads (8.7, 8.8, 8.9) it was possible to edit the…
  • Re: Vertical Gore Tool

    Michael, Please contact our technical support group through the following mechanism and provide them with a copy of your dataset. http://appsnet.bentley.com/srmanager/addcall.aspx Thanks, Jason Smithey
  • Re: Cut/Fill Transition Feature

    This is normal because there is no feature that is continuous from the previous template drop, Overrides can be defined for points in the template and a single feature is created for the slope stake line. But that would eliminate the different symbology…
  • Re: Import/Export Parametric Constraints

    Hi Chuck, This is planned to be fixed in the SELECT Update for InRoads Group V8i. Reference D-33623. Thanks for reporting this. Jason Smithey