• InRoads Storm and Sanitary Files Compatible with OpenRoads?

    We have a project that is starting in OpenRoads but some of the preliminary drainage design was already completed using InRoads Storm & Sanitary. Are the files and databases created using InRoads Storm & Sanitary translatable to OpenRoads? Or do I need…
  • Laterals

    I'm using InRoads SS2. I would like to add sewer laterals to the main trunk line without breaking the trunk line. Is this possible? Thanks.
  • Pipe listed in table but returns "structure not found in open database"

    I created and then deleted a pipe within storm and sanitary, however the pipe is still listed within the list of pipes in the database and shows as being attached to the structures. If I right click and delete it nothing happens, but if I right click…
  • Error reading idf file in Inroads Storm and Sanitary

    Inroads Storm & Sanitary on SS4, getting error messages when loading idf file for drainage Area. it says "Error reading from file...." and then the file path. Not sure why and can't get an answer. I am using SS4 storm and sanitary.
  • Inroads Storm and Sanitary - HGL/EGL not plotting

    Any reason why my HGL EGL lines plot in some profiles but not other? The lines are plotting for the main trunkline, but they are hit or miss with any of the branch lines. The design log shows that the HGL/EGL elevations are successfully computing, so…
  • User Defined Headloss not reflected in HGL/EGL plot

    Using Inroads Storm and Sanitary: I'm trying to enter a user defined headloss for a catch basin that will have a "snout" placed over the outlet pipe for water quality treatment. When I edit the inlet and check "user -specified head loss", enter a head…
  • What is the recommended workflow for creating drainage profiles for plan sheet production using SUDA in SS4?

    I can create and view both analysis and engineering profiles of my SUDA Storm drain elements. The only way I can figure out for creating profile sheets to include in my project plans is to export the engineering profile to drawing. Then it comes in as…
  • Show Pipe Flow Direction Arrows on Cross-Sections

    In InRoads Drainage, is there a way to generate pipe flow direction arrows for cross sections? I am looking for a result similar to the flow direction arrows you can generate for plan view using the command Drainage > View > Flow Direction Arrows. I need…
  • Re: InRoads - Storm Water

    The Storm & Sanitary Design Procedures are also included in the help file delivered with the software under Supplemental Information> Storm & Sanitary. You can order copies of the documents prior to InRoads Group V8i from http://docs.bentley.com…
  • InRoads S&S and Quantities

    As we look to implement more of InRoads, is there any connection between S&S and Quantities? We've been using S&S for a couple of years now and have a setup that works to meet our clients drafting standards. As we looked into adding the Quantities…
  • Re: Annotate Storm and Sanitary in Cross Section

    Marc, Go to Drafting> Place Cross Section Note. In the bottom, right hand corner of the dialog, click the black arrow to expand the dialog. Under Inserts, you should see Storm and Sanitary Structures. Add the desired inserts to a new or existing…
  • Re: Storm & sanit

    Anders, Please use the following link to access the tutorials: http://communities.bentley.com/Products/Road___Site_Design/w/Road_and_Site_Design__Wiki/inroads-product-tutorials.aspx Thanks, Jason Smithey
  • Storm & Sanitary - Sump Inlet Spread Calculation Issue

    We have been trying to utilize Storm & Sanitary to review inlet capacity and help evaluate gutter spread. Spread calculated on-grade is relatively close to utilizing the NENAH charts or using FHWA HEC-22 cacluations, however in Sag locations I'm not able…
  • existing surface grade filtering slopes? Any ideas?

    I am trying to find existing slope conditions along a 280 mile corridor. I need locations where a 5% and 3% slope exist within 100ft of the track CL (rail). Is there anyway that I can set up some type of filter that will highlight the area where these…
  • Sewer Plan and Profile from GIS data - ArcMap .shp shape file

    I have the following data in ESRI shap file (.shp, .dbf) pipe data with up node, down node, up invert, down invert, diameter, shape man hole data with lid elevation, bottom invert and shaft diameter Can anyone help me with the steps to…
  • Storm and Sanitary, modify queried items

    After having made a query to select 41 manholes, I want to change the material. The present material is not in the dat (structure) file, but i can change other manholes which had materials that wasn't in the dat (structure) file. Wats up? Tried shuting…
  • Re: Annotate Storm and Sanitary in Cross Section

    Marc, I searched and could not find a request for this functionality. If desired, please file a change request through: http://appsnet.bentley.com/srmanager/addcall.aspx Thanks, Jason Smithey
  • Re: INROADS - MOVING DRAINAGE STRUCTURES ONCE ALREADY PLACED

    When Snap lock is on, the software searches the geometry database and find the nearest geometry point and 'snaps' to that point for the location. If it is off, you should be able to use MicroStation standard snaps and snap to graphics in the DGN…
  • StormCAD V8i SELECT Update - Import/Export InRoads Storm & Sanitary

    All, I just wanted to let you know that we have recently posted a SELECT update for StormCAD V8i to the SELECT Services downloads site ( http://appsnet.bentley.com/myselectcd/default.aspx ). The version number for this release is 08.11.00.34.…
  • S&S as Crossing Feature on Profile

    Is there a way to display only the crossing segments of S&S items on an existing profile similar to displaying crossing features on a profile?
  • Inroads Storm and Sanitary FAA Regional Constants

    I am looking at calculating time of concentration in InRoads Storm & Sanitary. Using the FAA method, you are asked to give K1, which is stated as a "regional constant". Where can I find the relevant regional constants? Thanks, Jenna
  • Re: Hydraulic method of IR Storm&Sanitary

    The best source of information is the Storm and Sanitary Design procedures manual. From an earlier post by Jason Smithey: The Storm & Sanitary Design Procedures are also included in the help file delivered with the software under Supplemental…
  • Civil 3D Pipe Network Conversion

    My company is trying to develop a way to utilize the intelligent Civil 3D Pipe Networks, but we are required by most of our clients to display all of our data in a 3D model in Microstation. I am trying to create a workflow to convert Civil 3D 2012 Pipe…
  • Re: Importing MicroDrainage SWS files

    Rupinder, InRoads Storm & Sanitary also has the option of importing Micro Drainage SWS files. The command is located under File> Import> Micro Drainage after you toggle on Micro Drainage under Tools> Drainage> Menus. Thanks, Jason…
  • Re: InRoads Suite V8i- Drainage Preferences files

    The default versions of these files are located in the imperial and metric folders under the data folder of the product installation which is, by default, C:\Program Files\Bentley\InRoads Group V8.11\. In the imperial folder, the structures.dat and hydro…