• Design Cross Slope report values is not matching.

    I am trying to generate cross slope report @ 10 m interval by station base or station offset report but i am not getting appropriate values of cross slope in report. It seems correctly in cross-section view. Am missing something ?? Images is ready for…
  • Cross Section - Cross slope annotation off by 0.01%

    Hi, I'm annotating the cross slopes of the proposed surface and the values are off by 0.01%. Rather than 2.00% and 5.00% I'm getting 2.01%, 1.99%, 5.01%, and 4.99%. Has anyone had this problem before and found the solution? I'm using InRoads SS2. …
  • ROW lines in Inroads cross sections

    Hi everyone. First of all I want to show Existing ROW boundary in a cross section. I followed https://www.codot.gov/content/business/designsupport/CADDmanual/CDOTAlignmentDisplayinCross_Section.pdf However, I couldn't find Export geometry option…
  • Extra Breaks in Cross Sections

    I created a set of cross sections and for some reason it is creating extra breaks along the surface. I only need the PG, Edge of Lane, Edge of Shoulder, and Cut/Fill break. Any idea of why this is happening? An example is attached below. I'm using…
  • Corridor Modeling Cross Section Creation gpk cells not displayed correctly

    I'm trying to create cross sections after creating a corridor with superelevation. When I create cross sections using the "Stacked: GEOPAK Format" the gpk cells do not display correctly. Some sections are at -5 elevation and some are displayed correctly…
  • MXROAD Genio File Format Cross Section Editing on Autocad

    This tool is for edit MXROAD genio file format cross section and InRoads pen code format cross section on Autocad. 720p HD format video is available at, http://www.youtube.com/watch?v=eWD-tBKia28
  • Re: Annotate Storm and Sanitary in Cross Section

    Marc, Go to Drafting> Place Cross Section Note. In the bottom, right hand corner of the dialog, click the black arrow to expand the dialog. Under Inserts, you should see Storm and Sanitary Structures. Add the desired inserts to a new or existing…
  • Fill Slope Transitions / Parametric Constraints in the Roadway Designer

    Has anyone talked about the difference of modeling fills using a ration (e.g. 4:1) versus slope percentage (25%) particaularly regarding transitions? Example: A 2:1 slope transitioning to 4:1. One could expect the midpoint of this transition to be…
  • Cross Section: proposed surface/end condition doesn't intercept existing ground

    I am using Inroads Suite XM Edition. When I create my cross sections I notice that my proposed surface, in many cases, does not actually meet the existing ground surface like it should. In roadway modeler, the section views all look correct, but in the…
  • Re: Inroads - Volumes from Custom X-sections

    End area volumes are not computed on skewed cross sections. Thanks, Jason Smithey
  • Re: Profiles

    Charles, Please see the following posting: http://communities.bentley.com/Products/Road___Site_Design/f/5922/t/22389.aspx Thanks, Jason Smithey
  • Re: Staking Reports-Inroads

    Thomas, This looks like the CrossSectionStakingTable.xsl style sheet. I think this style sheet will only include triangulated features. It doesn't appear to display the subsurface feature lines also. Can you post a variation of this formatted…
  • Extra Cross Sections Being Cut

    Hi, For some reason I have one surface that when I create cross sections it cuts cross sections at extra stations. For example: I empty the design surface when I make the surface and in roadway designer have turned on and off horizontal…
  • GEOPAK SS3 - XS Labeling/Annotation?

    I am looking for a good "help document" that explains what is necessary for and the steps to take in order to label cross sections created by GEOPAK SS3. The cross-section labeler that I just became familiar with in SS2's Roadway Designer is gone, and…
  • Re: Custom Cross-Section Set

    On the General leaf, enter a number larger than the span of your alignment for the interval. I sometimes just enter 1,000,000. On the Controls> Critical Sections leaf, turn off all of the options that you do not want. See the help file for an explanation…
  • Re: Inroads Update Cross Section Notes

    Ryan, I have reproduced your problem and filed D-37693. Thanks for reporting this. Jason Smithey
  • existing surface grade filtering slopes? Any ideas?

    I am trying to find existing slope conditions along a 280 mile corridor. I need locations where a 5% and 3% slope exist within 100ft of the track CL (rail). Is there anyway that I can set up some type of filter that will highlight the area where these…
  • [InRoads] Cross Section Collision-Free for features

    hi, when annotating features in cross-section I can not get collision-free works correctly. The problem occurs when I need to annotate in frame two features which are in the same offset and two different elevations (one obove another). These two features…
  • Inroads Update Cross Section Notes

    Using Inroads XM, I have noticed a bug in when using the "Update Cross Section Note" tool. I have some flow line elevation lables and it is only updating to the correct numbers if I use the Single From Graphic option. If I choose All or Station range…
  • Re: Inroads XM: Cross section surface extends off the top of window

    Tim, Do you have 'Show Data Outside Elevation Range' toggled on the General leaf of the Create Cross Section dialog? If so, toggle that off. Thanks, Jason Smithey
  • Showing Features in cross sections (edge of road)

    Hello, I have an existing alignment that I am using as a center line to cut my cross sections, and I have a second alignment (edge of road) that I need to show as a point on the cross section. I need to show the distance and elevation of the second…
  • Re: InRoads. X-sections anotation problem

    Corey, The problems that I noted should only be in V8i. If you are having problems then you may want to contact support with your dataset. Also, it may not fix your collision free text problem but you should upgrade to version 08.09.03…
  • Re: InRoads. X-sections anotation problem

    Artem, There has been at least one fix made to collision free text for the next major release of the software. Though not ideal, you may have to manually move the text with MicroStation. You may want to send your data to support to confirm that…
  • Roadway Designer exporting Cut/Fill reports

    Hello, need some help here. I have created a roadway off of a template and the existing surface/proposed horizontal and vertical curve. When I process it all, and click the toggle on for showing cut and fill values, it shows them in the cross section…
  • Re: Annotate Storm and Sanitary in Cross Section

    Marc, I searched and could not find a request for this functionality. If desired, please file a change request through: http://appsnet.bentley.com/srmanager/addcall.aspx Thanks, Jason Smithey