• InRoads "Error loading the LOCALE resources library, CIVUSTNAT.DRX" error

    Whenever I open InRoads I get this error and any button I click in InRoads gives me this error. Previously there was a solution posted about renaming a "3082" file to "1033" however that is already done on my machine. Nothing has changed before this issue…
  • vehicle simulation with vissim

    Hello please I wish to know how to move from microstation to Vissim for vehicle simulation and back to microstation
  • Re: Microstation crashing!

    Please contact support so they can help debug your problem. http://selectservices.bentley.com/en-US/ Thanks, Jason Smithey
  • Re: Inroads .LIC file

    Dean, In addition, the name of the InRoads Group license should be bentleycivil.lic and the name of the MicroStation license should be msv8.lic. The bentleycivil.lic should be located in the licensing folder of the InRoads Group installation …
  • Tracking alignments and coordinate/geometry location shifts

    Sometimes in Inroads XM we have noticed an error that occurs with tracking horizontal alignments. After a horizontal alignment has been established and has been used for months, there have been times when you open a drawing in Microstation V8 (a drawing…
  • Cross Section: proposed surface/end condition doesn't intercept existing ground

    I am using Inroads Suite XM Edition. When I create my cross sections I notice that my proposed surface, in many cases, does not actually meet the existing ground surface like it should. In roadway modeler, the section views all look correct, but in the…
  • Survey graphics appearing without using the Write Survey Data to Graphics tool

    Several of the Survey users at the Connecticut DOT are having a strange thing happen when using InRoads Survey. We are using the following versions InRoads V8i SS1 08.11.07.229 and MicroStation SS1 08.11.07.180. A fieldbook is opened and vitually…
  • horizontal alignment tracking

    Sometimes in Inroads XM we have noticed an error that occurs with tracking horizontal alignments. After an horizontal alignment has been established and has been used for months, there have been times when you open a drawing in Microstation V8 (a drawing…
  • Re: select cad platform

    Tom, You are correct. The reason why the InRoads Group V8.5 Select CAD Platform dialog is empty is because you do not have a supported CAD platform installed. InRoads Group V8.5 does not support MicroStation XM Edition. This combination is not…
  • Re: Toolbars disappearing

    You may receive a better response if you post your problem in the MicroStation forum. Thanks, Jason Smithey
  • InRoads Bridge Haunch Values

    Is it possible to specify more than one haunch value for each girder in InRoads Bridge? I am using InRoads Bridge to verify girder elevations along the centerline of each beam. A table with haunch values at the 10th points has been provided that I…
  • Tabular point with STA and Offset report

    I have a project that I need to compile a tabular report showing the location of all utilities (water valves, manholes, power poles, etc). It needs to show Station and Offset. Using Microstation V8 and Geopak 2004. I thought about storing each as…
  • Re: Inroadsd V8.9 at Microstation V8i

    Anders, InRoads Group XM Edition (V8.9) is not supported in MicroStation V8i (V8.11). If you want to run MicroStation V8i, then you will need to upgrade to InRoads Group V8i (V8.11). Thanks, Jason Smithey
  • Re: Swap the point abbreviation and the station

    InRoads Group V8i is only supported on MicroStation V8i, AutoCAD 2008, and/or AutoCAD 2009. I apologize for any inconvenience.
  • live connection between Total station (Leica 1201 series) and MSTN

    is there anybody who has managed a live connection between a Total station and MSTN (similar to GPS connection) through a cable or Blue Tooth? We want to set a point (or add a line point) in MSTN when a measurement on Total station is taken. Total…
  • Adjusting traverse values in InRoads Survey

    Is there any way to adjust the traverse values (northing, easting, elev) in InRoads itself and it dynamically change all the other points that were shot from the reassigned traverse values? I've tried numerous ways and it still keeps the original values…
  • InRoads Drainage: Multiple Pipes

    What is the method for modeling multiple pipes at inlets and manholes?