I am trying to apply an end condition exception to a template that has a right outside edge of pavement that is controlled by a horizontal feature constraint so the outside edge of pavement is able to vary (for example, at a turn lane taper transition…

Hello, I am trying to set a shoulder rollover lock for the shoulder on the highside of a superelevated section. The lane transitions from NC @ 2% to Full super at 5%. I want the slope on the left be 3% when the lane reaches full super. I have tried…

I have some cut and fill lines that have appeared in my corridor model. I am unable to delete this line and it remains after deleting my template drops in the area. The first photo shows the area with my corridor and template still there. The photo…

Hi all I'm having an issue with ORD 2021 R1 when applying a Point Control to a Linear Template. It seems as though setting the Secondary Alignment option to True or to False does not have the desired effect of processing the rest of the template perpendicular…

Is development still going on for this product? I dont think ConceptStation has been updated in a year? Thank you

I am modeling 3D elements which were previously placed based in their corresponding X Y coordinates at elevation 0. Now that we have the terrain model I need to raise all of these elements to their corresponding elevation defined by the new terrain. Is…

I'm having an issue with my templates. I have a null point to create an auxilary lane where there are the corresponding corridor references. None of the components in the Aux lane null point are used in the regular mainline and I have display rules to…

I have a null point that displays a curb in my template with a horizontal feature constraint to that searches for the selected feature definition. I created a horizontal feature from a series of regular microstation lines chained together using microstation…

Is development still going on for ConceptStation? It looks like there has not been an update since 2018. Thank you

I have modeled 4 intersections using DOT's Civil Cells but they were all symmetric. This last intersection that I am working on is asymmetric and extremely annoying. The intersection in 2D can be seen here: I am using DOT's pre-build civil Cell…

I cannot get my Corridor Objects Toolbox to open. It was working a few days ago, but now I cannot get it to pop up. I have tried it in several different corridor model dgns. It is all the same result. I will click on the tool and then select the corridor…

I have a template that has an end condition on the left and the right. This particular end condition targets a specific feature definition both horizontally and vertically. The issue is that if I have a targeted feature on only one side of the road, both…

I’m having some issues with my combined surface on a project. I have a 4 lane mainline with 4 ramps. I have target aliasing on the ramps so that the infield side end condition of the ramp finds the mainline model’s fill slope. This is fine until I flatten…

Just a quick question out to everyone. I just hope I'm not going crazy. I swear I found a video out there a few months ago showing some modeling techniques at an interchange. More specifically, it showed some vertical gore tool usage where the ramp connects…

When are we going to be able to graphically edit the superelevation control lines in Openroads? This needs to be resolved. Terry

I noticed an issue with end conditions not tying into the existing ground line drawn in cross section cells. The problem occurred at several cross section and the error varied between 0.01' to upwards of 2'. After troubleshooting, it was noticed that…

When creating horizontal or vertical civil geometry we should have a toggle that will retain or not retain the "design intent". Having to go back and remove constraints and "re-civilize" elements is just a lot of extra clicks. Further design intent, and…

I need some help! This seems like a bug, but I was curious to see if anyone else has had the same issue, or had a fix. Situation: (For the sake of simplicity, I made a new template with just the end condition in question) -I need two levels of repeating…

I seem to be spending too much time cleaning up the overlapping or empty "wedges" of components when my ramps meet the mainline due to the angle of the ramp alignment. I was curious what others do in these situations, or do you simply leave the small…