Hello. I am new using open road designer. I want to show a line style, but I can't get to show them once I printed it on PDF: In level manager, I have both "Bylevel" and "Overrides," selected this: Thank you and best regards!

Hello there. I am currently working in the geotechnical ribbon workflow. I have an excel file of all the information needed for the required Borehole tab (e.g., Easting , Northing , Elevation , and Hole Depth ). Also, in the excel file I have the l…

Good morning, I'm trying to annotate the fill slopes for this cross section. We selected the points from the template to annotate, but nothing is coming in. The cross slopes for the roadway and shoulder backup are coming in though. The shoulder backup…

I am using Open Roads Designer (2021 Release 2) 10.10.21.04, FDOT connect. The issue I have been having is that I designed a whole drainage network, had cut cross sections and was labeling the cross sections. I noticed yesterday when I am looking at…

How do I get the grass to appear in green and have texture (last image shows what I want): I want this:

I am trying to import some profiles into Open Roads Designer using the Import/Export tool to select a gpk. This typically works for me and is still working for coworkers on the same project. However, on my machine it throws this error:

Hi I have a problem. I am learning Open Roads Designer Trial Version (14 Days). I want to import alg geometry file but it is not imported. Could it be because it's a trial version?

Is the option to "Clip End Conditions Only" not an option in ORD 2022 R1? Is there a different way to define this between (2) corridors. Looking at a box culvert corridor under my roadway mainline corridor. When corridor clipping is applied the underground…

I have a couple storm sewer utility runs drawn. Where one of my nodes have 3 different conduits connect too, in the properties how ever it only shows one connecting link. I'm attempting to resolve this so i can annotate all of the connecting conduit…

I was running a peak flow analysis and then some of my nodes started looking like the pictures attached below. It's not letting me edit them or connect new conduits. I replaced them for new nodes, but when I run the analysis, it just happens again not…

I need to shift my vertical alignment for one road to match where it meets another one that's already been designed by someone else. Can anyone help? I'm using Open Roads Designer CE - 2021 Release 2.

I get this error while using trace slope option for gutters for an drainage network. What am I missing? Thanks

Hi everyone, I'm using Open Roads Designer Connect Edition - 2019 Release 1 - Ver 10.07.00, and I'm watching video Side Slope Annotation at link: https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/37274/video…

Im putting in a new drainage structure that will be connected to an existing pipe. The design involves putting in 4 new feet of pipe at the structure and then attaching it with a concrete collar. Im not sure how I can draw this in ORD. Part of the pipe…

I drew up an existing drainage network (pipes, manholes, etc.) for a road. I did this by creating a MODLRD file and manaully drawing up all the pipes and nodes for that area based off of survey. Now I want to add inlets, manholes and pipes for my…

Hi, I am working with OpenSite. I need a comprehensive tutorial/video/PDF on the cross sections templates. What elements they should have. End conditions and hinge points. Here is my case: I made template drops at residential driveways of the streets…

Hi, Does anyone know a quick solution to fix the Bowtie Error that happens around tight corners of a corridor? (image below) - I know you can delete all the vertices, but it just goes back and re-draws if any edits are done to the corridor. -I know…

I have a terrain that looks great after I add more elements to the terrain some triangles shift. the shift is happening in areas that were previously processed and that looked good. can anyone help? software: ORD Release 3.

Hello everybody. I have a point cloud with 21 million points, when I create the terrain I have the following problems 1. Generating contour lines in Open Roads 2021 R1 takes a lot of time. 2. Once it finishes generating the contour lines, when I…

I have a fairly big surface and my file has become pretty much obsolete, everytime I try adding an element or removing an element the computer will just spin for 30 minutes to an hour is their best practices to how to deal with issues like this, I don…

Hi Everyone, I am extracting long sec profile from my tunnel model in OpenRoads and suddenly I am observing that just to generate 4 drawings (boundaries), it is taking more than an hour. Not sure what happened suddenly? It was quicker before (3-4 mins…

Hi, Can anyone share the onboarding guide of Open Roads Designer.

Two questions regarding Terrain Spot Elevations: First - I am trying to add the prefix "EL: " in my dimension style, but you are restricted to one character. Is there any way to have the prefix "EL: " in this label? Second - How do you remove the…

Can you make a video or walk me through the steps of creating the Match Line text favorite that ships with ORD 2020 Release 1? I can locate the text favorite but I can not tell how the linked elements were created because the links are broken? \ Thanks…

Is there already a Autodesk Vault plugin for Open Roads Designer?