I am trying to apply an end condition exception to a template that has a right outside edge of pavement that is controlled by a horizontal feature constraint so the outside edge of pavement is able to vary (for example, at a turn lane taper transition…

Hello, I am attempting to create a plan sheet with 4 insets that show design items that are off of the page limits. I created an inset file, referenced all needed files into there as well as an aerials file. In the drawing model space for this plan…

I want to edit the line style of traffic cones. I know I should work with the "Modify Line Style Attributes" menu in Microstation Connect. I was looking for a complete video or tutorial on this. What I want is to change the spacing of these traffic cones…

We have a live nested collector file attached to a working file and are unable to manipulate the levels. I am thinking this is a workset/workspace configuration setting done by the Prime.. Does anyone know how we can adjust this? Thank you, Carley…

Is it possible to split a template and add something in between a single pavement section template? In this particular case I am trying to add a raised median to a section that was made for a flush median. Instead of rebuilding the template I would like…

Hi, I am trying to change my format for slope to Slope Format. Currently it shows doubleformat, due to which I am not able to perform certain edits. For some reason in my dgn, it shows doubleformat. Whereas on my teammates dgn (separate file), it shows…

I submitted an SR to Bentley on 4/14/2022. I still do not have a resolution. During plot to PDF using Sheet Index and Print Organizer, I get the following errors for any sheet files that contain a reference ("simple" sheets such as notes or details…

Hello, I am using Excel to write a series of key-ins. The idea is to unclip, shift, and reclip a couple of references, then save a copy of the file with a given name, and repeat. It also attaches, moves, and scales a couple raster images, detaching…

Hello, I am laying out a rough placement for a roundabout. I have the splitter islands and approach lanes dynamically linked to the inscribed circle, all were placed using the horizontal geometry tools. I want to move the location of the center of the…

I created a custom drainage node. I want it to skew and shift it orientation with respect to the inlet. I changed the rotation and location of the bottom cell with respect to the alignment line and the point, however the cell translation has not updated…

I am using Uk standards Library for designing Stormwater drains. How do I add a new Feature definition/ Cell Library which is not in the Cell Library for a new Chamber (image attached for reference) in ORD. I tried using the Add New Template option and…

Hi, I am creating profile sheet the value FRL is roundoff like 100.139 to 100.140 in profile sheet. How can I edit and precise FRL value in profile sheet. Thanks

Hi, I am creating cross section sheet the value of lane slope is roundoff like 2.36% to 2.4%. How can i edit and precise my lane slope value in cross section sheet. Thanks

Hi all, I have a corridor of 4 Lane divided carriageway and I need to create a lane slopes report @ 10m interval. I ran the station base report . The camber/Lane slope in reports is calculating from centerline "CL" to carriageway edge "EOP" which is…

Utilities line styles, cut and fill limits and, BMPs line styles are coming in too large. For instance, I produce cut and fills normally by creating a corridor and template drops, set my annotation to 1" = 40' for instance and cut and fill limits come…

Good morning, We are working in a project. The contractor decided we start working using the latest version 10.11.00.115. We have been working with this versión and we have many files created. Now, the contractor has doubts to use a previous version of…

Hi, After exporting the 3D models from OpenRoads or OpenRail Designer, when I explore them in BimCollab or Navisworks, some of them doesnt't have right location. In BimVision and Trimble connect everything is okay. Do you know how can I deal with it…

I am using OpenRoads Designer Connect Edition 2021 Release 1. I am trying to model a pond with a sloped bottom. I created a corridor around of the top of the pond and used a template with a constant slope and an end condition which extends to a bottom…

Hi there, My only exposure to the gINT is the geotech module of OpenRoads Designer creating simple borehole information for roadways. In the past I imported this information from a simple excel spreadsheet. I see that option is now gone. What is the…

How to Split Horizontal and Vertical Alignments into Two Separate Alignments with maintain corridor?

Hi, I am trying to project profile to element but it shows broken profile, I tried profile by slope and range to element too but no difference in projected profile. Attached image is ready for your reference.

Hi, I am working with OpenSite. I need a comprehensive tutorial/video/PDF on the cross sections templates. What elements they should have. End conditions and hinge points. Here is my case: I made template drops at residential driveways of the streets…

I have created a hydraulic model and have been using it for a few weeks- now I am unable to extract utilities from graphics on any line I draw in the file and "Progress File" message pops up. Is there a way to get past this error without creating a new…

Hi, I'm wondering if there is an output log of the corridor processing in ORD, much like in MX where the input file log was passed to the output window where you could see what was done and where any errors were. All I can see is the progress…

Good day, I would like to find out if it is possible to customise the Profile Annotation Group to change the way ORD generates the tabular data for the horistonal and vertical data. I am specifically pointing to the way it generates the graphical lines…