• Station Offset Reports - Editing a Report

    Hello Team, Currently, we have been trying to generate a Station Offset Report using the tool "Point Feature Station Offset Elevation Report" and have been successful in using the tool. We understand that there's several types of report templates to…
  • Profile Annotation Not displaying CE 2021 R2

    The Dimension Line Annotation in the Annotation Group > Profile > Drawing is defined and Previews properly but it is not displaying in the Actual Profile. The images below show the Annotate With "Dimension setting for Crest vertical Curve is set and previews…
  • OpenRoads Drainage Design-How to Compute Single Networks at a time

    Hello, I am currently laying out and analyzing drainage design in ORD. Currently we have a single drainage file with multiple networks within it. When I compute the results, it runs all the networks at the same time. Is there a way to compute a single…
  • OpenRoads Crossing Chains

    Hello, We are working on a DTM design project that was created in Open Roads Designer. Linework was extracted from the point cloud. We had several chain crossings to fix. Once crossings were fixed, we exported a chain crossings report that had zero…
  • ORD DWG Export issues

    Hi, Using ORD 2021 Release 1 and Autocad C3D 2022. Profile Geometry Annotation lose values in export, K-value and grade change to 0.0 and Lines are exported between Profile IPs on Layer 0. Please find the Images. Thanks Lalit
  • Is it possible to hatch a closed mesh in cross section drawing - similar to hatching a component?

    Running ORD 2021 R1. I have created a closed mesh for select fill and referenced it into my cross section container file. I am trying to see if it would be possible to hatch the area inside the closed mesh in the drawing model, similarly to how components…
  • Computer Crashes when opening points for edit in Template designer

    FDOT Connect User When I open a point in a template to edit constraints and properties, my workstation will crash. If I wait long enough (5-10 minutes) it will open the point but that's just not an option obviously. I have tried making a new template…
  • Tracing Dependents in OpenRoads Connect

    Hello, I'm working some alignments for roadway ramps and one of my baselines tied into an offset from the mainline centerline. That centerline was since edited/deleted but since my alignment was off of an offset from that line, it retained all of…
  • Manually set Rainfall Intensity for Inlet Computations in OpenRoads Designer

    Hello - I'm a new ORD user trying to get familiar with the VDOT - Civil workspace. In Virginia, for certain roadway classifications, the VDM requires the use of an intensity of 4 in/hr for inlet computations (Spread Width). Previously, in Geopak, I was…
  • Cross section sheets uncentered

    I am creating a boat load of cross sections in multiple files. While the cross sections themselves are coming in fine, when they are laid out on the sheet, they are uncentered and its quite tedious to have to keep manually re-entering a 100+ sheets (especially…
  • How to move a cross section named boundary

    Hello! Does anyone know a way to shift a cross section named boundary in the drawing model? In this example, I simply want to shift my named boundary down in order to center my section better without having to recut a new named boundary. This is in…
  • Creating an existing DTM from LiDAR point cloud

    Good morning, What is the typical workflow for creating an existing DTM and a TIN from point cloud data? I am using ORD connect and also have TopoDOT. How should I go about doing this? Thanks in advance
  • Exporting selected models from an OpenRoads CE file

    I had posted a response to a post about exporting models, and commented that I was having trouble exporting in OpenRoads. A recommendation was to post in the OpenRoads forum to get a better response, due to the special element types and connections in…
  • Clash Detection based on Item Types

    Hi Is there a way to do clash detection in a bentley software based on "Item Types". We are setting up all our models with "item Types" and I have therefore tried to use them for clash detection. The way by using leves and references gives me some problems…
  • ORD Drawing production - Label tools

    OK Folks, here is my dilemma... I made some cells for annotating RW/easement breaks. Two of the cells when placed, the justification of in-line leader and leader are offset from the origin of the cell. See image below. I played around with the dim…
  • Border Cell missing linework in Sheet model

    Hello all, my sheet model is not displaying all of the linework for the border cell. The cell looks fine in the .cel file, and when i try to drop another cell in the sheet model it still appears to be missing linework.
  • OpenRoads Survey - How to stop it from re-processing the survey points

    Using OpenRoads Designer 2020 Release 3 Update 9 (V10.09.00.91) How do you get OpenRoads to stop re-processing all the survey points? I am having an issue that after I've gone and rotated some of the symbols to the correct orientation OpenRoads re…
  • Edit un attached surface created from survey points

    I created a surface from survey points but not linked to them since the surface is too big. now I have to edit the elevations of a data file but if I do since the surface is not attached nothing happens. is there an easy way to remove a datafield file…
  • Actual length profile in box

    I'd like to add the actual length (cumulative) at the interval of the horizontal alignment. This is needed for drillings, where in top view the distance is different than the actual length. I also like to add a box with the distance between the surface…
  • Superelevation not showing on first profile sheet

    Hi, While creating profile sheets I am finding that the superelevation section of the table displays correctly on all the sheets apart from the first one. On the first sheet it looks like the left image, and on the rest it looks like the right. …
  • First time using open roads

    I have been asked to create an existing highways alignment in OpenRoads, I have been given a 3D topo survey to base it on. I am struggling to find useful online videos/walkthroughs that relate to this specific task. If anyone knows of a good place to…
  • Power Geopak for SS10 vs ORD Connect

    FDOT user: First thanks to all who have answered my previous questions. I started at a new firm this year, and come from a background where I only designed in 2D. By this I mean we did muni. roadway and only used the 2D features in SS10 (w/ Geopak…
  • How to turn on and off Civil exaggeration in the view attributes?

    I have two drawings, one with the option to change the civil exaggeration in the view attributes and one without. I dont know how it got turned on or how to turn it off.
  • Is there a way to create a report that shows areas of associated regions that are linked to a station range?

    *Edit: I am using OpenRoads Designer 2020 R3 I have a spreadsheet that requires the drainage areas for a ditch to be input every 50 feet right and left along an alignment. The “manual” method I would use to accomplish this would be to use the measure…
  • ORD Measure Area anomaly

    I'm using ORD 10.08.01.33. I quickly made two dummy DGN files to test some weird behavior that I was seeing on a project: a.dgn contains a half-dozen lines & arcs that create a shape (but they remain individual elements and are not a chain or closed…