I am creating cross section sheets, and when I create the sheets, in the Create Drawing window, I change the name of the first Sheet Model to the first sheet number, "X1". I'd like the drawing models and the saved views to remain as the station of the…

I am attempting to create a new annotation group(s) to function with the new feature definitions I created for Phased construction. I needed to customize the DGNLIB a bit and configure to read from my edited file for the library. Everything seems to be…

Hello all, I've cut cross-section sheets off the alignment at 25' increments (urban job). After having gotten the cross-sections to self annotate things such as existing fence lines, driveway slopes, and existing buildings via the annotation groups…

When I cut my cross sections, I had my curb return model referenced into the sheets as they were cut, and they have even been annotated with the Drawing Model Annotation tool. Now that I need to print the sheets, the curb return model is turned off in…

Is it possible to split a template and add something in between a single pavement section template? In this particular case I am trying to add a raised median to a section that was made for a flush median. Instead of rebuilding the template I would like…

I am trying to get excavation cut and fill quantities for a project. There will be a section of the terrain that will be cut and then there will be a fill placed on top of that. I'm trying to figure out what tools to use to achieve this. Would I create…

I'm going insane trying to figure this out, I'm pretty sure this is the easiest fix in the world but I'm just too ignorant. I have two surfaces, one is from an old survey and one is a new one. All I want to do is overlay them, display cut and fills…

I notice that if I add ORD Cross Section sheet models to a Sheet Index and/or a Print Organizer pset that they default to Rasterized. Plan or Plan-Profile, etc. default to non-rasterized (Rasterized box NOT checked). Rasterized plots turn out a little…

Is it possible to export Openroads Cross Section sheets to the DWG model space instead of as sheets in the DWG as seen below?

Hi, I am creating cross section sheet the value of lane slope is roundoff like 2.36% to 2.4%. How can i edit and precise my lane slope value in cross section sheet. Thanks

Hello, I am looking for some specific help with a cross section grid annotation issue that my coworker and I are experiencing. We have both recently transitioned from V8i to ORD CE 2021 R2 and have been scouring the forum (and google) for specific…

How I can create custom cross-section bands in open road designer like showing the yellow area in the attached image? in the workspace where I can find the setting for it?

I've search high and low and am not able to find any documentation on "Annotation Filters" and how the "expressions" work. There's nothing in OpenRail Designer Help Website about Annotation Filters or Cross Section Frame Annotation. Does anybody…

Hello, I am working in OpenRoads Designer 2022 and am creating existing pavement boxes using a corridor. In the corridor file, I am using the standard template with 5 points (left shoulder, left edge, center, right edge, and right shoulder) that follow…

I am using a template with CUT & FILL Multi-slope Solutions (1:6, 1:4, 1:3, 1:2) with a priority for each one of them. My question: even with the CUT & FILL multi-slope solution, has anyone been able to create a rule or maybe a null point that would solve…

I am trying to generate cross slope report @ 10 m interval by station base or station offset report but i am not getting appropriate values of cross slope in report. It seems correctly in cross-section view. Am missing something ?? Images is ready for…

I am trying to model existing utilities for our cross sections and am having a hard time modeling utilities that have bends like this watermain shown. I have inverts at the beginning and end of that line, and want to utilize the existing linework but…

I am stuck with using InRoads cross-sections on a particular project, but I am considering re-creating the geometry and terrains in ORD and using ORD for the drainage design so I can take advantage of ORD efficiencies. But I must be able to display this…

I am creating a boat load of cross sections in multiple files. While the cross sections themselves are coming in fine, when they are laid out on the sheet, they are uncentered and its quite tedious to have to keep manually re-entering a 100+ sheets (especially…

Hello, I'm using Openroads Designer and am trying to update named boundaries for cross section views. I added a 3D feature line in a reference file that is set up to display a cell when shown in cross section view (more specifically, a right-of-way…

Does anyone know of a way to verify the numbers we're getting for earthwork? Either by EAV or prismoidal? I have lobbed the question out here before, but the only way I know to check is to check the drawing cross section model and use the 'flood' option…

Hi Everyone, I am currently trying to export my cross sections from open roads designer to DWG auto cad format. However no matter what setting I try on my export the DWG files seem to contain the 3D model (as shown) I have tried disabling 3D settings…

Hey, Has anyone else ran into this problem? I'm using the same cross section annotation on every one of my models, and sometimes the EAV table populates and other times the EAV table does not populate on the cross section. It will be along the same…

Hi, While exporting Cross sections to dwg format, EAV Table values are showing 0 in dwg file. Please suggest any solution for this error. Thanks in advance, Mintu Mondal

I am struggling with the annotation in my cross section sheets. I have a lot of questions, listed below, if I can get answers to any one of them that would be greatly appreciated! Here is a sample of my XS. 1. I have the same template drop for…