I want to edit the line style of traffic cones. I know I should work with the "Modify Line Style Attributes" menu in Microstation Connect. I was looking for a complete video or tutorial on this. What I want is to change the spacing of these traffic cones…

For some reason when doing annotated profile views for my sight distance lines all of my profile groups switched to "Other groups" and I'm not sure why. I was wondering if there was a way to move them back under the "Profile Groups" tab.

I have a large point cloud attached to my file that has point shots for everything on the same classification. Therefore, I cannot turn off everything besides the ground shots to create a terrain surface for the existing ground of my project area. When…

I am using Uk standards Library for designing Stormwater drains. How do I add a new Feature definition/ Cell Library which is not in the Cell Library for a new Chamber (image attached for reference) in ORD. I tried using the Add New Template option and…

I try to Upgrade a Highway Corridor Modell from 3D mesh to LOD 400 level of Model in OpenRoad Designer, But I have a Reference Shop drawings in only 2D dwg file and 3d dgn with also nwc Naviswork & IFC file & Dwg shop drawings, unless It's doesn't contains…

I am trying to generate cross slope report @ 10 m interval by station base or station offset report but i am not getting appropriate values of cross slope in report. It seems correctly in cross-section view. Am missing something ?? Images is ready for…

Hi all, I have a corridor of 4 Lane divided carriageway and I need to create a lane slopes report @ 10m interval. I ran the station base report . The camber/Lane slope in reports is calculating from centerline "CL" to carriageway edge "EOP" which is…

Hello, I am operating OpenRoads Designer Connect Edition 2020 Release 3. I have a DGN file that is just a bunch of lines. These lines have elevations associated with them and are considered to be in an older vertical datum which I would like to update…

Hello Team, Currently in our project, we are going through our templates adding "Vertical Point Controls" due some special ditch elevations. Our template (shown below) consists of a 6:1 after the turf, a 4:1 then our ditch. At some points in our project…

In MicroStation ORD after creating an alignment line the manipulator handles are not available to adjust. I've already confirmed that 'disable handles' on element selection is on. How do I enable them again? Mike Uncapher

Hi, I am a new intern for an engineering company and this is my first time working with OpenRoads and any Bentley software. Like I said, I have only been working with OpenRoad for a few days now and I am very lost in the process of models and sheets…

Is there a way to add additional triangles to an arc to follow more smoothly (not the outside boundary, but for inner line elements like back of curb)? Other then using the Terrian Model Edit tools? When processing the terrain, the triangles in areas…

I have received a file from our surveyor. The project is SS10. It looks like the file is actually a CONNECT file. How can I see what version of product the files actually is? Thanks to all for any help.

Hello Team, Currently, we have been trying to generate a Station Offset Report using the tool "Point Feature Station Offset Elevation Report" and have been successful in using the tool. We understand that there's several types of report templates to…

In Open Roads Designer, Is it possible to setup a labeling format to label a point on an alignment in Straight Line Format (SLM) rather that the normal station format (Sta. 100+00 to SLM 1.8939)? I was unable to find a way to do this using text favorites…

Hi Is there a way to do clash detection in a bentley software based on "Item Types". We are setting up all our models with "item Types" and I have therefore tried to use them for clash detection. The way by using leves and references gives me some problems…

Greetings, Does anyone know if ORD has the Select by Attributes tool like MS V8i had (under Edit->Select B y Attributes)? Say i want to select cells by their names... is there a tool for that? I searched the help and this forum and didn't find any results…

Hello I am working in ORD for the first time and cannot find any tools that were similar to the Cross Section Navigator tools that were available in ss10. Are there any tools that I can use to create working lines in the cross section view? We want to…

I'm trying to convert a pickup survey done in ss10 to Openroads Designer. I was able to export and import it using a land xml file, but when I import it into ORD the feature definitions do not display properly. It's almost like it is holding out to the…

We've migrated from MX to OpenRoads Designer and it seems we are in the same boat as many former MX users whereby the process to generate cross-sections in ORD is long and frustrating compared to MX. A cross-section run to produce annotated cross-sections…

Hi all, I am having a problem in Open roads designer connect edition with the command STENCIL 2D ELEMENT ON 3D GEOMETRY. This command (in Visualization) helps to drape 2D mesh layer onto 3D surface above it. But for Some surfaces, the 3D DRAPED projection…

Hello, I'm sorry that this may be a stupid question but as a new user, I'm really confused about the products. I work for a Civil Engineering firm in Brazil and we're looking to use software that will allow us to implement BIM the best way possible…

Hi, Is it possible to setup element templates per view i.e. default, plan, profile, cross section ? instead of a general setting for all views.

MS的安装也存在同样的问题，尝试了论坛里的诸多方法似乎没有什么效果，有什么方法可以解决我这个问题吗？急！！！ 报错的log如下： [2268:0588][2020-04-13T16:52:31]i001: Burn v3.11.1.2318, Windows v10.0 (Build 15063: Service Pack 0), path: C:\Users\ADMINI~1\AppData\Local\Temp\{3B0E8EAA-EDC5-4AF3-B8AC-9DB496CA5370…

Hello Eveyone, I have done some research and digging related to this issue already and have not be able to find an answer or better solution for what I need to do. The issue I am having is that I need to create a terrain model from 3D contours and breaklines…