Whenever I try to open the profile view openroads crashes. (crashes when the command says select view and I click into the box to see it) I created a profile from my horizontal alignment and then drew a new vertical over the profile. complexed the vertical…

In PowerCivil it was possible to change direction of the profile from right to left. Will this be possible in ORD? We have an alignment which goes from east to west, and would we would like to change the direction of the profile so it matches. From…

Hi, I am creating profile sheet the value FRL is roundoff like 100.139 to 100.140 in profile sheet. How can I edit and precise FRL value in profile sheet. Thanks

This is probably a very simple question. I use the quick profile transition tool a lot but once an arc becomes part of a complex element I can't then use it on that arc. I typically use the tool before complexing but what is the best way around this…

I am attempting to profile the gutter line for an intersection return. One one end of the return I want the profile to match the existing gutter line, and on the other end of the return I want the profile to match the proposed gutter line from my corridor…

Hi Guys, I cant figure out how to correct station intervals in my production profile sheet . After using chainage equation, ahead station of my profile showing unevenly. Regards , Lalit

Hello, I need some guidance on how to display utilities on the roadway profile. the way I've done it so far is by creating a profile run of my utility. However, this only works on one specific file, and I am not able to reference this file in the…

Hello- I am experiencing weirdness with my alignment/profile in OpenRoads Designer 2021 R1. I have a 3 mile trail with many horizontal and vertical curves. I know there may have been limitations with Geopak/V8i with the number of vertices in a profile…

Afternoon all, I'm relatively new to the Bentley ecosystem, so please forgive me if this is documented somewhere. I've noticed odd behavior when I'm trying to edit complex profiles and I'm hoping someone who knows better could give me some insight into…

For some reason, I cannot get my profile to display. It starts out like the first picture then i had to zoom in (a lot!) to get to the station range of my alignment as in picture 2. It use to show up with the entire proposed profile and ground line. if…

Hello everyone, I am presently trying to re-create some fairly complex corridors from SS2 to ORD using a technique for creating the ditches on both sides of the road corridors by using templates that use additional vertical alignments for each of the…

Hi, Using ORD 2021 Release 1 and Autocad C3D 2022. Profile Geometry Annotation lose values in export, K-value and grade change to 0.0 and Lines are exported between Profile IPs on Layer 0. Please find the Images. Thanks Lalit

I am using OpenRoads Designer CE 2021 Release 1 for an urban roadway project that utilizes a lot of custom Civil Cells for driveways. Today I deleted one of the driveway Civil Cells and replaced it by using new reference graphics. Everything seemed to…

Hello- We have created annotation groups to display profile strip grades, both existing and proposed. We have feature definitions and annotation groups assigned to both existing terrain and to the proposed design profile. When testing, we can get the…

Is there a way to reference the profile view into another dgn? Or make the profile elements (the way that InRoads created profiles)?

Hello, I am working through the "Designing a Pond" lesson within the Intermediate Drainage Learning Path. Because I receive the "Civil Data Found that is from a newer version of a Civil Product" error when opening the provided file from the lesson,…

Hallo, How to Show/annotate Existing Ground Level correspondence to Edge of Pavement line in Profile view? Also can I show Existing Ground Level at any offset from PCL? Thanks in Advance, Mintu Mondal

How do you create an overlay template for a divided highway with a single centerline in Openroads Designer?

Hi, I am using OpenRoads 2020 Release 3 Update 9 - Version 10.09.0091. I am having an issue with Table Editor tool when I try to edit my profile. Every time I try to add a PVI after of before a PVI, the dialogue box disappear with an Exception Log…

I made horizontal and vertical alignment, complexed by elements ( lines, curves). Then, when i display in 3d, what i got is 3d polyline of multi-lines. How can i get a 3d model with full properties as i made in profile ( curve's radius, start/end…

Is there a way to attach a dgn file to an ORD profile view? In the past I often used graphic elements in a profile drawing to assist in designing the CL profile. There are factors other than existing ground elevations that sometimes impact the profile…

Hello, I am trying to generate Plan & profile sheets following ODOT's example videos. I have generated the proposed alignments in the BK file and generated the GP drawings using the design2d file from the create design files application. I referenced…

I need to snap onto an intersecting profile. How should I go about doing it?

I've got multiple issues currently with profile views in ORD 2019 R2 (10.07.03.18) Profile views randomly break such that linear element is lost, annotation broken and view is unrecoverable. We cannot determine a specific cause for the behavior…

The elements in the drawing model coming from annotation group (profile frame and table) do not conform to the specs defined in the library. Lines weight and style are set to 0 while in the style library they are defined differently. The case is only…