When running templates with trigger lines in ORD, I am finding that I cannot have trigger lines on both sides of a corridor that search for the same feature definition. An example would be using a trigger line that starts left of the center of my template…

I've drawn special ditches in my drainage profile using vertical point controls in my corridor to control the ditch bottom. I want the template to draw a simple slope to grade anywhere there isn't a special ditch in the profile. However, since neither…

Is it possible to split a template and add something in between a single pavement section template? In this particular case I am trying to add a raised median to a section that was made for a flush median. Instead of rebuilding the template I would like…

I recently found an old InRoads video that shows what I am trying to achieve in ORD. I want the ditch to show when the existing grade slopes toward the road and a fill slope when it falls away. The video used the template below. When the slope is below…

I am trying to get excavation cut and fill quantities for a project. There will be a section of the terrain that will be cut and then there will be a fill placed on top of that. I'm trying to figure out what tools to use to achieve this. Would I create…

I try to Upgrade a Highway Corridor Modell from 3D mesh to LOD 400 level of Model in OpenRoad Designer, But I have a Reference Shop drawings in only 2D dwg file and 3d dgn with also nwc Naviswork & IFC file & Dwg shop drawings, unless It's doesn't contains…

Hi all, I have a corridor of 4 Lane divided carriageway and I need to create a lane slopes report @ 10m interval. I ran the station base report . The camber/Lane slope in reports is calculating from centerline "CL" to carriageway edge "EOP" which is…

I am trying to generate cross slope report @ 10 m interval by station base or station offset report but i am not getting appropriate values of cross slope in report. It seems correctly in cross-section view. Am missing something ?? Images is ready for…

For the undivided 2 times 2 lane road when the template is choosing after rural-asphalt-4 lane crown the template gives almost 10 meters ditch gap. How can it decreaseS ? lLİke 4 meter

Hi, Does anyone know why corridor model switches don't work as intended in ORD? In my template, I have a null point that has a horizontal feature constraint. When this horizontal feature constraint activates, the end condition I want modeled only…

Hello, I have recently come across an issue with XS annotation group that was copied from the delivered workspace. The specific group is the XS Grid w/Annotation and the Annotation Definition XS Point Annotation. As a double check, I opened ORD using…

Hi all, I am making a corridor for a road with parking, sidewalk. However, i get stuck in the position without parking lot, the curbs turn with 90 degree. I tried making a Point control horizontal alignment, however, it goes wrong. How can we…

My X-Section Annotation Groups in my "Features_Annotations_Levels_ElementTemp.dgnlib" file were not displaying in my cross section models and I figured out why-- the annotation groups were based off of points from the default Civil Templates Imperial…

Hi, A channel complex element from a template/corridor doesn't get created on the default 2D plan view. Other complex elements from the same template/corridor i.e. edges of pavements, sidewalks do appear. The channel's elements only get created on…

1) I have assigned TL-shoulder edge feature def to shoulder edge point but that point is not displayed as linear feature in Plan view (2D view). 2) There is no issue in cross section and Default 3D view. I am using Open roads Designerx64-10.04.00048…

OpenRoads Desiigner CONNECT Edition - 2020 R1 Update 8 (v10.08.00.88) - I was trying to use the horizontal feature constraint to control my corridor and could not get it to work. When I edited my template to check the feature name I noticed that all my…

My template is set up with priorities to solve for several cut and fill conditions. The guardrail end condition has the highest numerical priority and solved last. Naturally, this creates "pockets" of the guardrail shoulder condition along a corridor…

I have a model with several different template drops and linear templates. Is there a way to synchronize all template drops in a model?

Hey all, I recently completed a project in OpenRoads Concept Station. Now we want to take the project into OpenRoads Designer in order to add utilities and other more complex elements. I exported out everything from Concept Station and it claimed everything…