• How to create terrain file using IMG files?

    Hi, I want to create 3D terrain file from available data in TNRIS. There are some available file types: LIDAR cloud points (LAZ), Disc Image File (IMG) and corresponding XML Documents. I tried "Import terrain model from file" command in OenRoad. The…
  • Adding Nodes to 3D Lines for Graphical Import of Elements into a Terrain Model in ORD

    Hello Eveyone, I have done some research and digging related to this issue already and have not be able to find an answer or better solution for what I need to do. The issue I am having is that I need to create a terrain model from 3D contours and breaklines…
  • webinar recording

    Bonjour, J’ai suivi le webinar aménagement sites OpenRoads de Vincent Rault en français le 29.10.2019 11-12h. • Conception de plateformes, parking et surfaces • Conception des voiries d’accès Très bien et utile mais je ne trouve pas l’enregistrement…
  • Importing Geometry from GPK isn't Working Correctly

    I have a model in openroads that was created off of imported geopak profiles. This model has been updated many times with this same gpk and it correctly replaced the previous profile. However, for some reason in the last two weeks when I import the new…
  • OpenRoads Text favourite's into Microstation Connect

    When I open DGN outputs created by OpenRoads the Text Favourites do not display in Microstation Connect. This affects all outputs including Long Sections, Cross Sections and Control Lines I have tried using the same workspaces and ensuring that the…
  • Mesh differences

    Hi there, Does anyone know the deference between the triangulated surface mesh design method and the Open roads 'Bentley mesh' corridor design tool? We used to be able to export meshes in a .dgn format and have them retain a solid surface fine,…
  • Visualisation in OpenRoads

    Goodday, I recently started using OpenRoads connect edition and i've been facing some difficulties. - Firstly, I wish to know how I could get the vehicles in the image below get their realistic colours, I have tried all the display styles and even…
  • EOT line Profile By Template

    How would I go about getting my EOT lines to have "profile by template"? My horizontal alignment is the only line with a profile. When I hover over any of my EOT lines they say "no active profile". I can set an active profile but want to have them automatically…
  • Geopak SS4 with Microstation V8i SS10 Error

    Installed the newly released Microstation V8i SS10 8.11.09.908 with Geopak SS4 8.11.9.878 but getting an error similar to another post about Inroads and Microstation SS10. Will there be a Geopak release that's compatible with this new Microstation V8i…
  • How to have both MicroStation an OpenRoads installed in the same machine

    Hello, I´m have installed on my machine OpenRoads ConnectEdition. But I need MicroStation too. So my question is: do I need to download a full install of MicroStation and run it, or there´s a way to use the MicroStation's core that OpenRoads uses? …
  • Openroads running extremely slow. Freezes up on simple things

    When I first had Openroads installed on my work PC, it was great! There were no features or setting up and running, but everything was fast, the program was much more efficient with my processor, I was happy. That was a few months ago, now, after a few…
  • item type length for civil complexe element

    Is there a way to have the total length of a complexe element to show up in an item type? or in Microstation Report? Is it possible to share an example? file or other? I can get it to work for a non-complexe element like a civil line but not a complexe…
  • Open Roads Designer Survey

    Hi Guys, I used to work in Microstation Powercivil SS2 before for importing my survey information. I used to upload all my raw data from my total station to Powercivil SS2 through Survey<Dataset<New and upload my .csv file into it. It used to create…
  • [CONNECT C#/C++/VBA] OpenRoads - Model Flags/Properties - Annotation Cell

    Versions: OpenRoads Designer and SDK Update 4: 10.04.00.48. And MicroStation Update 10 (10.10.00.32 and SDK 10.10.00.23). I am trying to create a model (a cell) that can be placed as annotation cell. The model gets created as expected, but fails to…
  • OpenRoads to Microstation Profile and Cross section Export

    Hi All I am having trouble exporting profiles and cross sections from OpenRoads to Microstation. All data (chainage, elevations, offsets) are converted to ####. Is this a set-up problem or a bug, and what could be the solution?
  • Analyze Point within Microstation

    Good morning, I wasn't sure if I should post this in the OpenRoads forum or the MicroStation forum, but I will try it here first. Is there a tool similar to the "Analyze Point" tool within MicroStation that will allow a user to query an alignment or…
  • Using Design History in ORD?

    I've noticed Design History is enabled again after being disabled in SS3/4 - does this mean it is good to go for ORD? It would be fantastic if so. Testing it, it seems to be working correctly for Microstation elements but crashes when using it for…
  • Open Meshes when Clipping Corridors

    Hi all, We are having some issues with Openroads (MX) SS4 creating open meshes (no end face) when clipping corridors. Has this been (or is this something planned to be) fixed in ORD? Im assuming this is the reason the corridor component reports haven…
  • ORD Microstation Constraints with OpenRoads Geometry

    Hi all, I have been trying to use Microstation Connect Constraints with OpenRoads Designer geometry with no apparent issues except having to nudge the geometry (by slightly extending, moving, etc.) to sync the OpenRoads geometry (ie. 3d) with the…
  • View Attributes - Civil Geometry

    Trying to Civilize some Microstation elements and some work and some fail to civilize and I am having to redraw. It would be very handy if civil Geometry was a View Attribute that I could toggle on/off. Terry
  • Move Parallel in Civil Geometry

    I want to simply move a line (Civil Geometry) parallel to itself for a distance defined by snapping to some other element. I don't see that there is a simply way to do this very basic thing. Move parallel... I don't want a copy, I want to move the existing…
  • Clipping Volumes and DCDrape - Openroads

    I am having several issues with DCDrape.pal First, the terrain elements in Openroads do not appear to support materials being attached. The dialog will attach and the query will find the DCDrape material but they do not show up in the element properties…
  • Profiles in SS4 and Snapping

    AccuSnap needs to work inside the profile view. If Accusnap is on then the profile tools should properly lock in on elements, not lock the float around and require the user to lock inthe pop up window. If you need to add a lock somewhere to make the inputs…
  • PowerGeopak UI separation from SS2 and OpenRoads in ProjectWise.

    OK all! I am trying to have UI paths set upon starting PowerOpenRoads SS2 or SS3 (gpk and inrds) while starting in Projectwise. I have everything set if a user has SS2 or SS3 base Geopak installed but I cant get it to separate the UI from SS2 to SS3…
  • Project Explorer Settings

    It is annoying that we can't simply right click on Project Explorer to get the settings... especially given the propensity for it to "forget" which tabs you opened. Please add this ability.