• Modify Line Style Attributes

    I want to edit the line style of traffic cones. I know I should work with the "Modify Line Style Attributes" menu in Microstation Connect. I was looking for a complete video or tutorial on this. What I want is to change the spacing of these traffic cones…
  • Assistance with a Crashing Key-In File

    Hello, I am using Excel to write a series of key-ins. The idea is to unclip, shift, and reclip a couple of references, then save a copy of the file with a given name, and repeat. It also attaches, moves, and scales a couple raster images, detaching…
  • OpenRoads Designer has detected a problem and logged it to exception.log

    Myself and a few other users are getting the following error: OpenRoads Designer has detected a problem and logged it to exception.log... Can anyone tell me where to find this log file? I thought it was in the user's local appdata but I am unable…
  • cross section editing

    Hi, I am creating cross section sheet the value of lane slope is roundoff like 2.36% to 2.4%. How can i edit and precise my lane slope value in cross section sheet. Thanks
  • Editing in Station Offset Reports

    Hi all, I have a corridor of 4 Lane divided carriageway and I need to create a lane slopes report @ 10m interval. I ran the station base report . The camber/Lane slope in reports is calculating from centerline "CL" to carriageway edge "EOP" which is…
  • File opening Slow- Reads all files in within workset

    Good Morning, When I open files, I notice that the file opening dialog will read our dnglib files, the reference files for the dgn etc. But then it will read dgn files that are not referenced in the .dgn, but that are within the same workset. …
  • converting V8i Workspace to Connect

    So I have a bunch of work that was done in V8i and our company is switching to use ORD. I tried opening up some old DGNs and the fonts and styles, etc. were completely wrong. Is there a way to convert V8i workspace configuration over to ORD? I do not…
  • File Management and handling design options

    I am working on an interchange/urban expressway project that has around 20 alignments that all have some sort of connection to each other. We have separated them all into their own files, along with plan element and corridor files for each alignment.…
  • Template Drops - Special Ditches

    Hello Team, Currently in our project, we are going through our templates adding "Vertical Point Controls" due some special ditch elevations. Our template (shown below) consists of a 6:1 after the turf, a 4:1 then our ditch. At some points in our project…
  • Wrong Sheet Border

    Hi, I am a new intern for an engineering company and this is my first time working with OpenRoads and any Bentley software. Like I said, I have only been working with OpenRoad for a few days now and I am very lost in the process of models and sheets…
  • Design Cross Slope report values is not matching.

    I am trying to generate cross slope report @ 10 m interval by station base or station offset report but i am not getting appropriate values of cross slope in report. It seems correctly in cross-section view. Am missing something ?? Images is ready for…
  • Terrain

    Hello Team, (Easy question?) Recently, we had created a terrain and we found some trouble spots in it, like points connecting to other points where it should not connect. We understand how to fix these issues but we wanted to get a more realistic…
  • Split Horizontal and Vertical Alignments into Two Separate Alignments in ORD 2021R2

    How to Split Horizontal and Vertical Alignments into Two Separate Alignments with maintain corridor?
  • profile station in sheet profile is showing uneven intervals after using chainage equation?

    Hi Guys, I cant figure out how to correct station intervals in my production profile sheet . After using chainage equation, ahead station of my profile showing unevenly. Regards , Lalit
  • ORD DWG Export issues

    Hi, Using ORD 2021 Release 1 and Autocad C3D 2022. Profile Geometry Annotation lose values in export, K-value and grade change to 0.0 and Lines are exported between Profile IPs on Layer 0. Please find the Images. Thanks Lalit
  • Edit un attached surface created from survey points

    I created a surface from survey points but not linked to them since the surface is too big. now I have to edit the elevations of a data file but if I do since the surface is not attached nothing happens. is there an easy way to remove a datafield file…
  • How to turn on and off Civil exaggeration in the view attributes?

    I have two drawings, one with the option to change the civil exaggeration in the view attributes and one without. I dont know how it got turned on or how to turn it off.
  • Is there a way to create a report that shows areas of associated regions that are linked to a station range?

    *Edit: I am using OpenRoads Designer 2020 R3 I have a spreadsheet that requires the drainage areas for a ditch to be input every 50 feet right and left along an alignment. The “manual” method I would use to accomplish this would be to use the measure…
  • Batch Plotting best practices

    Fellow collegues, I am asking for the most effective way to batch plot several files. as of now we are doing individual sheets and is killing me. I have tried plot Organizer but I feel like it takes quite a bit of time to set it up. I have also used…
  • Adding data to a surface without re-cleaning

    ORD 10.9.0.91 How can I add to an existing surface without having to redo all my clean-up? I have a boundary on my surface that helps me clip all the outside edges when editing a surface, but every time I need to add more data to areas outside this…
  • ORD Properties Menu "no content to display"

    Hi there, I'm using OpenRoads Designer. For some reason, when I have the properties menu docked it'll be working just fine. However, if I leave the properties palette docked and open a different .DGN, the properties menu will then display "no content…
  • ORD - Profile Drawing Production: Tabular Data - Graphical Lines

    Good day, I would like to find out if it is possible to customise the Profile Annotation Group to change the way ORD generates the tabular data for the horistonal and vertical data. I am specifically pointing to the way it generates the graphical lines…
  • OpenRoads Designer 2020 Release 3 use with Microsoft SharePoint

    We recently purchased OpenRoads Designer release 2 (10.08.01.33) and earlier this week, upgraded to release 3 (10.09.00.91) We also switched from GoDaddy to Microsoft 365 cloud based system which also gives us SharePoint. So we have all things Microsoft…
  • OpenRoads

    Hello everyone! What is the difference between OpenRoads Designer CONNECT and OpenRoads ConceptStation CONNECT? As a beginner what must I learn first? (I am a student).
  • OpenRoads Designer CONNECT Edition

    Hi, Is it possible to create design standards without any country kit installed? When I browse into the explorer and right click on it, seems no option to create a new one? I am using version 10.8.0.88 Thank you. Regards, Jenel