• ORD - Configuration réseau

    Bonjour, Sous ORD 10.09.00.91 FR, j'ai modifié via C:\ProgramData\Bentley\ORDCE\Configuration\ConfigurationSetup.cfg _USTN_HOMEROOT = <mon chemin reseau> et _USTN_CUSTOM_CONFIGURATION = $(_USTN_HOMEROOT)Configuration\ et _USTN_HOMEPREFS = $(_USTN_HOMEROOT…
  • XIN is Blank - Preferences and Styles Lists are Empty (BROKEN LINK)

    If your XIN is blank and your preferences are not loading and you want to use the solution described in the link below but cant download the .msi because the "msxml.msi" is no longer hosted on http://www.microsoft.com/en-us/download/details.aspx?id…
  • Corridor Feature Lines Set

    Hi Whenever I make a new corridor, the corridor feature lines seem to end up on the default level I have on. I am working on projectwise and my workmates don't seem to have the same setting. They go on different levels depending on what component that…
  • Power In-Roads

    I have a workspace provided by a DOT. Why in the "Set Project Defaults" in the lower right hand corner "preferred Preferences" is greyed out and when the down arrow is selected nothing shows up? Thanks for your time.
  • PIR Text Editor forgets size & location

    I recently installed Power InRoads V8i (SS4) 08.11.09.904 and began using. The text editor preference I use is the Word Processor style. Upon calling for the editor the 2nd, 3rd, and subsequent times in a session, the Word Processor appears in it…
  • Color Coded elevations preferences

    Hi, I ma trying to save my preferences when I create a legend for color coded elevations but the Save Save As buttons are grayed out. Any suggestions? Thank you.
  • OpenRoads Create Cross Section preferences Not there in GEOPAK SS4

    Has anyone seen this problem and a correction for it. Putting this out on the forum since it deals with FDOTSS4 workspace environment using the FDOTSS4.xin have one user when Using the Create Cross Section tool from Corridor Modeling, selecting the…
  • I am using Inroads V8i V08.11.07.536 when I open my .xin file none of the preference shows up. Please help us out.

    We use preferences to draw our baselines cross-section and symbols in MicroStation using a client base xxx .xin. We can load the XIN file but when we try to use it nothing shows up in the dialog bog. this is happening with the 08.11..07.536 version of…
  • Inroads v8i Preferences:

    Can someone upload some good preferences and template files for me please. I would tealy apritiate it. For Inroads V8i. Thank you!
  • Can't Find the 'Cursor Prompt Dialog'

    I'm using SS4 and can't find the 'Cursor Prompt Dialog' under 'Workspace > Preferences > View Option - Civil'. Has it been moved? Or, is there something I need to do to get it to show up? Thanks in advance.
  • Cannot save Cross Section Preferences in Geopak

    I am working on creating a set of cross sections, but I cannot save the preferences that I am entering. When I open the Preferences window from the Create Cross Sections window, the Save. Save As..., and Delete are grayed out, and clicking on Load does…
  • InRoads XIN file from XM to Upgraded InRoads SS2

    We were recently upgraded to begin using Inroads SS2 from Inroads XM. I loaded our XIN file that was created in Inroads XM and discovered that there are some problems with the previsiously saved preferences in XM. After viewing the various new settings…
  • Re: Default symbology settings in dialogs.

    Robert, Does the GPK variable you told me about override Modeler Preferences? If I set GPK_SET_LEVEL_BYLEVELS=1 and then load my Modeler preferences, all my object symbology does not update. I noticed this on my home machine as well so don't think…
  • Re: Power Civil v8i preferences

    Neil - One of the reasons for the GSF format change in V8i was to enhance the capabilities for preferences. I have not tried the use of XM preference file as you suggest but you may need to run through the object settings in V8i and set them the way you…
  • Corridor Modeler Template display - slopes

    When I hover over a ditch, my 4:1 foreslope displays at 25%. So I attempted to adjust by right mouse clicking in the section window of roadway designer, bringing up the "display template" dialog and entered the following, trying to switch it to an alternate…
  • Combining Preferences

    I recently received a new set of preferences (XIN file) that are more based on DOT standards and have set up some of the basic operations to work correctly as default without loading a particular preference set. The problem is that the in house set of…
  • Installed as Metric, but default linear units are always Imperial?

    MicroStation V8i SS2 (08.11.07.443) and InRoads Suite V8i SS2 (08.11.07.494) New to supporting InRoads product.... Installed new MS and IR products after un-installing previous versions of both and deleted all directories left-over. During the…
  • PowerCivil for NA V8i (SS2) preferences not working

    We are using PowerCivil for North America (SS2) V08.11.07.564. The civil.xin file seems to load but there are no preferences, symbology, or styles available. We can't even create these attributes. Read-write is toggled. I have uninstalled/reinstalled…
  • Re: Need InRoads HELP!!!! Horizontal display

    With InRoads, we now have the ability (I assume you are using Ss2 InRoads in Indiana) to use 'Geometry > View Geometry > Options' to assist in getting LOTS of annotation FAST (one click). Of course, you first need your XIN to have the preference…
  • Re: Preference Manager

    Hello Marc, Preference Manager is a single location where you can change preferences without running the commands. The nice part is that all preferences are shown and whether the name has been defined for a particular command. Preferences can be…
  • InRoads V8i (SS1) Save As Options

    We'll be installing InRoads V8i (SS1) and AutoCAD 2010 next month, but will continue using InRoads XM with MicroStation XM for a few more months. How can we set the Save As options in V8i to always default to version 8.7-8.9 Compatible? I'm hoping there…
  • Re: .alg to be read-only

    Joe, Go to the Tools> Options> Geometry tab and toggle on Read-Only for the Horizontal Alignment and Cogo Buffer, Apply, and save the preferred preference. The next time that you open the XIN and ALG files, the geometry should be read-only. …
  • why is my save as button disabled in the preference dialog box

    guys please i created a profile, so that i can create my vertical alignment, after setting all the neccessary settings for the profile, i now tried to save the preference so that i can reuse then, then i discorvered that the save as button is diabled…
  • XIN Manager ?

    Any chance of incorporating an EnvisionCAD.com like "XIN Manager" into InRoads in the near future? Globally editing symbology in a spreadsheet is simple enough since you can export to a CSV file. But Styles are a pain to edit globally using an XML…
  • Power Civil v8i preferences

    I have Modeler preferences set up for Power Civil XM. When I load them into Power Civil v8i, the settings for my objects don't update. Is there an incompatibility issue? How do I get my preferences into v8i?