• Corridor Modeling - Template Defaults to a Construction Layer

    All, Was wondering if any of you have ever experienced this. I am in the IDOT (Illinois Dept of Transportation) workspace. As shown below, in my template library, the aggregate is modeled with feature definition. Whilst, in Cross Section Viewer and…
  • Superelevation DATA

    What's the best way to get the Distance and Slope from OpenRoads SS10 that needed in this table, please?
  • Super Elevation Outputs and STA/OFF report - issue with STAs (not rounded to +00)

    This is what I get when run The Station-Offset / Station Base-Offset reports for every 10'. you see at some point i don't get that rounded number and start getting weird ones, any thoughts on how to fix the intervals to get every rounded 10'?
  • Superelevation Outputs from OpenRoads - every 10'

    Can someone help me find on how to extract the super output from OR for every 10'. Would be great if I can get this info similar to table below. Much appreciated!
  • Cant open SS4 file

    I have a ditch file I cannot open. the circle keeps spinning. Please help! Are there any ideas why this might be happening? Thank you.
  • K value in the profile view is multiplied by 100!!

    Any one knows why my K value is multiplied by 100 in the profile view? it should be 39.49 and it shows as 3949.73? Appreciated!
  • XS_Point_Label_Indicator "X" is TOO big in XS.

    What's wrong with the XS_Point_Label_Indicator "X", Why its too big and how/where can I fix. This happens when I generate cross sections and start annotating. Appreciated!
  • Display Feature Definitions (e.g. BL and ROW) in Cross section using element template points.

    I have a line that has a Feature Definition that replaces a line in the Cross Sections with a designated cell. However when I cut Cross Sections sheets the cell is not showing up correctly. The level and linestyle that it should be showing up as is being…
  • [MS SS4 Geopak SS4] ROW Line not Displaying in Cross Section and Template Drop not fully shown in Model

    I'm running into a two issues. First, my ROW Lines appear in the Cross Section Viewer (see image below) However, whenever I go about to create the XS for my sheets, everything but the ROW lines are displaying (see image below) Weird thing is…
  • FDOT SS4 ,itl

    Where can I download or if anyone has FDOT .itl library - Appreciated!
  • [GEOPAK SS4] Modeling a Headwall/Wingwall with Ditch at a Driveway. Need advice and assistance

    Good day everyone, Always something new at work to learn. I need assistance in regards to modeling a headwall on the side of a driveway and ditch. I modeled the driveway using a simple civil cell that came with the program (though would like to learn…
  • Terrain model lower elevation topsoil shapes

    I am wondering what the best way is to edit the elevation in certain spot of a terrain model using shapes. I am in SS4 and I basically want to offset my terrain model 6in down where I have the shapes located. Thank you in advance!
  • Layout (Component Based), drawing components issue

    I am using Bentley PowerGeopak SS4. I am trying to store a vertical profile in COGO using the road tool "Geopak-Road-Geometry-Layout (Component Based)". I have active chain control open and COGO activated, however I am unable to draw any of the profile…
  • Culverts not displaying in XS sheets

    I've run into some issues when cutting XS for culverts specifically. All other conduits have shown up in XS view as well as our trench trunk lines. When attempting to trouble shoot the issue I found that the culverts show up in the dynamic XS view but…
  • Importing Geometry from GPK isn't Working Correctly

    I have a model in openroads that was created off of imported geopak profiles. This model has been updated many times with this same gpk and it correctly replaced the previous profile. However, for some reason in the last two weeks when I import the new…
  • Openroads Profile Creation

    Is there a way to import a a profile not created in OpenRoads into OpenRoads? I created a profile through GeoPak and am wondering if I can save sometime and import it into vertical geometry. I'm working with Power GEOPAK v8i SS4.
  • SS4 Geopak - Not able to copy Civil elements

    Just curious if that is intended behavior of the program, - when trying to copy a Civil element in SS4 Geopak nothing happens and "Element type not valid for the tool" is displayed on the bottom. I know we could do that in SS3, it would just paste the…