As you can see below, in the areas where my cross sections are superelevated, this is what they look like. Specifically this is how they look in-between each of the stations I defined in the excel import file. Is this normal? Here are the properties…

Hello All, The problem I'm having is when applying a superelevation using assign to corridor it changes my pavement limits but shows the slope correctly. This occurs with assigning the right lane to super from the CL to the RT EOP. See screenshot. Any…

Hi, I am creating cross section sheet the value of lane slope is roundoff like 2.36% to 2.4%. How can i edit and precise my lane slope value in cross section sheet. Thanks

Hello, For several days I had problem with change slope on road ramp. I checked definition of superelevation section, lanes and transition. Also I checked templete library and top pavement have 3 points with correct cointraints and superelevation flag…

Hello, I am trying to set a shoulder rollover lock for the shoulder on the highside of a superelevated section. The lane transitions from NC @ 2% to Full super at 5%. I want the slope on the left be 3% when the lane reaches full super. I have tried…

Hello, Is there a way to export your superelevation tables from the Superelevation Editor? I am able to import values, but am unable to find the export command in the software. Thanks, Emily

Hello! I am trying to apply a superelevation to a divided highway. I have attempted this with 2 different superelevation files with the same result. The left side of the highway will not super. I have superelevation in the file and the Eastbound lanes…

Hi, *EDIT: I found that these are actually Graphic Manipulators, is it possible to convert these to actual annotations? Does anybody know if it is possible to export the slope wedges (see figure) from a Superelevation section to a DWG file. Viewing…

I am trying to generate cross slope report @ 10 m interval by station base or station offset report but i am not getting appropriate values of cross slope in report. It seems correctly in cross-section view. Am missing something ?? Images is ready for…

I have been facing a problem with super elevation for some months now. The Alignment , corridor and superelevation are in different files. More often, the corridor file does not reflect the super elevation. The point control window in Corridor objects…

I'm trying to create a superelevation report at specific increments, so cross slope is displayed at each interval. this would be something similar to the VerticalAlignmentIntervalStationElevationGrade.xsl report for horizontal and vertical alignments…

I'm having a problem where the grips/graphical manipulators and dynamic text on on the superelevation lanes and model view are not showing up. I thought to check in:File > Settings > User > Preferences > View Options - Civil to discover there are no…

Super is not being applied in one of my corridors. i can see it point control and the correct points are set. i can see the purple squares that indicate where it should be. i have deleted the points from point control, closed/opened the file and reapplied…

I'm using the OpenRoad Designer CONNECT Edition - 2020 Release 3 Update 9 - Version 10.09.00.91. The inside shoulders are not coming in correctly and I am trying to edit them. But I am not able to edit any superelevation using the Superelevation Model…

Hi, we are experiencing issue with superelevation rule file in PW. We use ORD 10.09.00.91 and ProjectWise Explorer 10.00.03.453 and managed workspace. When a superelevation rule file (xml) is assigned to a superelevation section it gets copied out to…

Hi. I'm unable to find a topic on following issue, which seems to be quite easy, but...I'm designing in OpenRoads and in template there is a simple gravel layer - 20 cm high with rooftop type crosslopes - 4% each. As I create the superelevation, for…

This is what I get when run The Station-Offset / Station Base-Offset reports for every 10'. you see at some point i don't get that rounded number and start getting weird ones, any thoughts on how to fix the intervals to get every rounded 10'?

Can someone help me find on how to extract the super output from OR for every 10'. Would be great if I can get this info similar to table below. Much appreciated!

Hi, While creating profile sheets I am finding that the superelevation section of the table displays correctly on all the sheets apart from the first one. On the first sheet it looks like the left image, and on the rest it looks like the right. …

Hi All, Hoping to have some advice on the following. When i run through the prompts of calculating super elevation once this has completed, nothing seems to apply to my lanes, nor does anything appear in my super elevation editor or superelevation viewer…

Hello, when I reprocess my corridor, the superelevation definition disappears. I've defined my superelevation in other file, then I've referenced it into my model file and I've assigned to my corridor. So far everything is correct, but when I reprocess…

I want use the" AASHTO 2001 emax6 Dual metric.srl" file to do superelevation, but the design speed for superelevation can not display for choose below 50 km/h, but the file list all the speed, does any body know how to show the 40km/h speed for use? …

I'm using Openroads 2020 R3, I need to export and import my superelevation from one file to the other. I need to do this because it's a fairly long model with many transitions all build manualy and my alignement changed a little bit and I need to have…

Hello Friends, Need help in figuring out the Pivot method for 4Lane/6Lane or 8Lane Carriageway with depressed median having cross slope (Normal Camber) outward from the depressed median (refer the attached image) I tried 'Divided Inside' as well as…

Hi, can we have a similar tool to corridor reattach for superelevation so we don't have to recreate it every time we run complex redefine? Thanks, Krzysztof