• How to annotate super elevation profile in Long section box?

    Please anyone help me in to display the Super elevation profile in Long section box. Thanks in advance. I am using Open roads Designerx64-10.04.00048 - 2018 release 2 version

  • Roadway Designer - pavement warping vs. superelevation

    I am new to Geopak Corridor Modeler and am struggling with superelevation. Actually, pavement warping would be a better description. I have stations and cross slopes at exact locations for how we want the pavement to tip and where; at the beginning of…

  • Superelevation on Ramp

    Running InRoads V8i - When running the PGL along either edge of a single lane ramp, what is the best method for creating superelevation? The wizard requires three points and to specify two or four lanes. If I simply create control lines for the left and…

  • Modeling Superelevation Transition - Reverse Curves

    Running InRoads V8i - This is the first superelevation I have tried to create in a model. Two curves close together with superelevation in opposite direction, designed with a continuously rotating plane between curves. I first ran the wizard to set up…

  • [Inroads v8i] Superelevation sections problem

    It seems that either there is a bug or I miss something in superelevation tool in roadway designer. I use wizard (ig. table method), adding sections and solviing overlaps - the superelevation is defined. Then I want to revise my superelevation's section…

  • Re: Superelevation doesn't work with Display Rules

    Our superelevation control is applied to the EOPs of our top layer of pavement. The lower layers of pavement are constrained with a slope equation equating to the slope of the top layer. So, these slopes are constrained back to the point controlled point…

  • Optimized Profile

    Hi guys, I have just come to do this process of Optimization which consists of setting my 2% by 2% template onto my OG. Then matching to either LEP, CL or REP depending which one it hits first, so we can PADD only. This used to be a long process of…
Communities
Support and Services
Training and Learning
Social Media