• InRoads V8i: Create a surface using Template

    How to create the surface as shown below using the template? I tried to create a closed shape for the bottom of the surface, then apply the template (Design Surface -> Apply Template), I couldn't get the surface as shown below. Anybody please kindly show…

  • Re: 3D polyline from DTM

    Try the Surface> Design Surface> Drape Surface with Tools> Locks> Locate set to Graphics. At the top of the Drape Surface dialog, the Current Locate Mode should display Graphics if the lock is set correctly. Click the Help button on the dialog for more…

  • IR - Transverse Features in Alternate Surfaces

    InRoads XM 08.09.03.06 I often need to toggle on the add transverse features in the models so that the slope components match the surface triangulation. But, no transverse features are added to alternate surfaces, so I end up with different triangulation…

  • Merge multiple surfaces

    Hi guys I'm in a position where I have about 100 surveys which I have to merge into one complete DTM. But we still need them as seperate DTM's.The surveys are delivered in dwg format and as excel sheets. So far I've been importing the ASCI's with…

  • existing surface grade filtering slopes? Any ideas?

    I am trying to find existing slope conditions along a 280 mile corridor. I need locations where a 5% and 3% slope exist within 100ft of the track CL (rail). Is there anyway that I can set up some type of filter that will highlight the area where these…

  • Re: InRoad2004-How to modify a already created profile?

    Lucy, To display the top and right axis, you must toggle on the appropriate settings under Evaluation> Profile> Create Profile> Axes and redisplay the profile. You cannot display the top and right axis on an existing profile. I apologize for the…

  • Triangulation halted

    Good morning Community, sometimes we've got problems with triangulation in InRoads in our company, it throws the message "Triangulation halted. ..." and I know that it's a known issue descriped in http://communities.bentley.com/products/road___site_design…
    • Bentley Inroads - Triangulation halted.zip

  • Re: Vertical Gore Tool

    Michael, Please contact our technical support group through the following mechanism and provide them with a copy of your dataset. http://appsnet.bentley.com/srmanager/addcall.aspx Thanks, Jason Smithey

  • Out of memory error

    Hi, I am having a problem with a large dtm derived from LiDAR data. It is about 350MB in size, and when I try to generate contours in either InRoads XM or v8i, I get an out of memory (swap device may be full) error. I was actually able…

  • Re: Inroads XM: Cross section surface extends off the top of window

    Tim, Do you have 'Show Data Outside Elevation Range' toggled on the General leaf of the Create Cross Section dialog? If so, toggle that off. Thanks, Jason Smithey

  • How to show Low/High Points of a Surface (dtm)

    Hello there! I have this issue, when i was done creating a surface (dtm) using Inroads, i wanted to view the low/high points of that surface, so is there any way to view them using InRoads??? Thanks & Regards, Imad Balich

  • Contours Smoothing Method

    Hello there, I just have a simple question, is there any way that we can choose another method of smoothing of Contours in Inroads , for example in Geopak we have more than one one method of smoothing as shown below: Thanks...

  • Cross Section: proposed surface/end condition doesn't intercept existing ground

    I am using Inroads Suite XM Edition. When I create my cross sections I notice that my proposed surface, in many cases, does not actually meet the existing ground surface like it should. In roadway modeler, the section views all look correct, but in the…

  • Re: InRoads - Generate Sloped Surface

    Curt, It is a known issue that when the Locate Mode was set to Features that this occurred in InRoads V08.11.05 (Reference D-35302). This is fixed in InRoads Group V08.11.07.227. I apologize for any inconvenience. Thanks, Jason S…
Communities
Support and Services
Training and Learning
Social Media