• Horizontal Alignment Annotations Reverting Back

    I have moved my horizontal alignment annotations to avoid overwrites in Plan Production, but when I modify my vertical alignment; the horizontal alignment annotations revert back to the original location. Is there a way to disassociate the PC, PI, PT…
  • Profile Table Editor - Incorrect Values for Back/Ahead Slopes

    The profile table editor shows an incorrect value for the ahead slope and back slope given the stations and elevations of the PIs. The slopes shown in the manipulators of the main view window are correct. What is causing this error? Open Roads…
  • Simplify or break vertical elements in a profile.

    I have a completed profile that I'm trying to go back and modify the vertical slope in one area. I want to break that slope into 2 different slopes and place some other vertical geometry between them. The beginning and end of the current slop is related…
  • How do I get my proposed terrain to show up in the same view window as my cross section and my vertical alignment?

    I need to shift my vertical alignment for one road to match where it meets another one that's already been designed by someone else. Can anyone help? I'm using Open Roads Designer CE - 2021 Release 2.
  • Profile Annotation

    How do I go about annotating a profile model? I need to show curve radii, slopes, k values, curve length, etc. Here's a picture of my screen.
  • ORD DWG Export issues

    Hi, Using ORD 2021 Release 1 and Autocad C3D 2022. Profile Geometry Annotation lose values in export, K-value and grade change to 0.0 and Lines are exported between Profile IPs on Layer 0. Please find the Images. Thanks Lalit
  • Vertical PI to precise station

    I'm using Power Geopak V8i SS10. Very new user. I have my vertical alignment built and I built using line and then profile curve between element. I noticed that PI location is determined by the lines, as that is the way that I built it. I'd like to…
  • Centerline vertical geometry not displaying in 3D

    I'm using Power Geopak V8i SS10. Very new user. I have my centerline horizontal and vertical created and both have been exported to the gpk. My geometry file is referenced into my model file. When in my model dwg, if I switch to 3D space, the centerline…
  • Complex By Element Not Valid

    I am attempting to use the Complex By Elements tool to create vertical geometry. When I try to select my first element, I get the error message, "Element not valid for tool". I am in what appears to be a 2D view. I cannot use plan by 3D element on the…
  • Is it possible to add a smart surface element to the vertical alignment view?

    I am trying to create a vertical alignment that connects from an existing terrain to a layout made from smart surfaces. I have tried to add via Quick Profile from Surface but the smart surface is not valid for the tool. Is there another way to show…
  • OpenRoads ConceptStation changing vertical alignment when placing ramp connection

    I've imported a .alg file or .xml into ConceptStation from the geometry from OpenRoads Designer or previous versions, when placed, everything looks perfect, horizontal and vertical. When designing a ramp connection, the vertical alignment seems so off…
  • [ORD] Refresh Active Terrain Model

    Hi Does anyone know if there is a way to refresh or re-associate an active terrain model that you've made changes to? In my case, our initial survey lacked detail and extents in a certain area. I added the additional information to the new terrain model…
  • Display of horizontal and vertical alignment

    When I am trying to make an horizontal line, the line I made appears instantly in the 3D View. However when I try to make the vertical alignment and turn it in to an active profile, the profile appears right above the horizontal line. How can I remove…
  • How do I import Geopak Vertical Alignment information into ORD?

    I can import my Horizontal alignment information using the .gpk file into ORD using the "import geometry" tool. But can not get the vertical alignment information imported. ORD version: 10.06.00.38
  • vertical alignment design in MX road

    how to change existing ground model in design of vertical alignment
  • [IR SS2] changing Horizontal Alignment and updating changing Vertical Event Points - it it possible?

    Hi everyone, I have a railway alignment and there are 16 stations. I added horizontal and vertical event points in alignment for these stations to show the places on the plan and profile. But i have to change some part of the horizontal alignment…
  • SS4 MX Vertical Alignment crash.

    Several members of my team are having a similar issues, going from Horizontal to Vertical Alignment the machine crashes stating 'system fault mad memory access' Any suggestions? I have had this problem for as long as I can remember, I usually have a…
  • Vertical Alignment

    I have created a Vertical Aligment in GEOPAK V8i and I need to create a copy of it that I need to lower the entire V.A. a certain amount. How can I do this? Where do I find the tool to do this? Thank you in advance for your help. Ray
  • Checking integrity of horizontal or vertical alignment in OpenRoads

    In SS2 I could verify the integrity of a a horizontal or vertical alignment and then be able to move the order around and change the direction of the alignment. In SS4/Open Roads I don't know of a way to do this and it would be helpful now that I have…
  • Importing Geometry from MX for open roads

    I am new to open roads. I was trying to import a master string into open roads. I imported Triangulation too and set it as active terrain. When i opened the profile model of the imported string, i see surface profile and the design profile or not coherent…
  • Dialog box change from InRoads XM

    We're just moving from XM to V8i (SS2). One of my users came to me today to point out that the dialog box that used to be in XM when editing vertical PI's no longer appears. When moving PVIs, for example, the dialog allowed direct entry of the station…
  • MX V8i SS4 - Crappy Vertical Geometry tools

    Hi, Could you please let me know when Bentley is going to repair these crappy Vertical geometry tools? I logged Service Ticket (#7000271461) in November 2014 for MX V8i SS3 .722. The comment added to my ST are as follows: Created: 11/28/2014 1…
  • Cleaning out unused alignments

    [Thread moved from the Be User Groups community forum] My problem is that I don't know how to tell which PGL chain my vertical alignments are based upon. I've just taken over a project that's had a variety of previous designers who've created many alignments…
  • Inroads/Microstation, Rail Vertical Alignment coordination with Road Grade Crossing Vertical Alignment

    Hello All, Let me start with a description of the work.. Approx. 130 Miles of Proposed Track to run along existing Track. Approx. 260 Grade Crossings. Is there anyway to automatically import Track Vertical Elevation for each Cut of Roadway Grade…
  • Re: Display Vertical High Points in Plan

    If you are asking about a way to display a report of the high and low points, here are two suggestions. Go to Geometry> Review Vertical Alignment. You should see that VLOW and VHIGH are reported here. Click Save As to save the report to a text…