I hope to find the answer to the following problem: I already have a terrainmodel. Now I get a dataset of 2D lines with at the ends a figure, saying: "This line is x cm/m below terrain" How do I get those (many) line's automatic drawn into my design…

I am trying to copy 35 driveways (civil cells ) form one reference file to a Dgn but to software tell me that there are elements . how can that be?

In Geopak SS2 when you describe a profile the SSD is reported with the sag curve and you can use the visibility tool to show a graphical representation based upon a TIN file. Just wondering if there is or will be an equivalent in Open Roads.

I am having a little trouble understanding the way the Arc vs Chord definition setting should work during the use of the Spiral Curve Spiral tool. Below I have 2 scenarios that report different results. I would like to know why this is happening and if…

When doing a report on a horizontal alignment I am getting metric stationing values, yet when I review the horizontal alignment in InRoads I am getting values in survey feet as intended. Any ideas on what I need to change to make the report show same…

Hello, I am using SS3 V 08.11.09.578 & GEOPAK V 08.11.09.674 - Upon going through eLearn module for manipilating geometry, and utilizing the design standards toolbar, I get warning signs on my horizontal alignment, but the Civil Message Center Dialog…

Hello All, Let me start with a description of the work.. Approx. 130 Miles of Proposed Track to run along existing Track. Approx. 260 Grade Crossings. Is there anyway to automatically import Track Vertical Elevation for each Cut of Roadway Grade…

How do you establish alignment Point IDs? I have a geometry project that User "A" created closed aligments to generate an area reports for R/W takes. When you review the horizontal geomtery or printout "Area report", "R/W Take reports" or "control line…