• Corridor objects - Point control , key station , parametric constraints

    I am not able to add any new point controls , constraints or as any corridor object in my corridor. The only way i am able to add any object is by copy pasting an already created one and modifying it. Any solutions to this? and any idea why this is…
  • End Condition Exception Not Following Horizontal Feature Constraint

    I am trying to apply an end condition exception to a template that has a right outside edge of pavement that is controlled by a horizontal feature constraint so the outside edge of pavement is able to vary (for example, at a turn lane taper transition…
  • Issue Using the Same Feature Definition for Template Trigger Lines on Both Sides of a Corridor

    When running templates with trigger lines in ORD, I am finding that I cannot have trigger lines on both sides of a corridor that search for the same feature definition. An example would be using a trigger line that starts left of the center of my template…
  • Corridor Mesh and Corridor Processing Performance

    This question relates to corridor meshes and how they relate to corridor processing (performance). I understand that a corridor mesh - being displayed - is a function of the design stage (as set within the DGNLIB). Such as when the design stage is changed…
  • Excavation cut and fill quantities using templates

    I am trying to get excavation cut and fill quantities for a project. There will be a section of the terrain that will be cut and then there will be a fill placed on top of that. I'm trying to figure out what tools to use to achieve this. Would I create…
  • OpenRoads/OpenRail: Mass Haul Diagram with advanced features

    Is there a workflow/method to generate a mass haul diagram that displays advanced features such as Free Haul, Overhaul, Haul Direction, Borrow and Waste? See the trailing image as an example illustration. Is there a workflow/method to include borrow…
  • How to attain 3D mesh to LOD 400 Model with help of 2D Shop Drawings in dgn?

    I try to Upgrade a Highway Corridor Modell from 3D mesh to LOD 400 level of Model in OpenRoad Designer, But I have a Reference Shop drawings in only 2D dwg file and 3d dgn with also nwc Naviswork & IFC file & Dwg shop drawings, unless It's doesn't contains…
  • Proposed Terrain Creation - Remove Null Points from Graphical Filter

    Hello All. Running 2021 R2. I've modified a KYTC template for my project. The template uses "switch points" to control whether the end condition and sholder is displayed (for use at intersections, entrances, etc.). My corridor is set up and I used the…
  • Openroads Template Arc/Rounding/Fillet Stroking Values

    I'd like to apply rounding to my ditches and slope limits in my corridor. I've tried using both the rounding and fillet options on my end condition and I've tried using an arc component to achieve my desired result. The arcs look right in my template…
  • Corridor Modeling - Template Defaults to a Construction Layer

    All, Was wondering if any of you have ever experienced this. I am in the IDOT (Illinois Dept of Transportation) workspace. As shown below, in my template library, the aggregate is modeled with feature definition. Whilst, in Cross Section Viewer and…
  • Divided Highway - Superelevation not applying

    Hello! I am trying to apply a superelevation to a divided highway. I have attempted this with 2 different superelevation files with the same result. The left side of the highway will not super. I have superelevation in the file and the Eastbound lanes…
  • ORD Carriageway Tie-in Best-Practice

    Hello, I have reached the point in my project where I need to tie-in the carriageway (dual carriageway, channels and lane markings, both ends of the alignment, so 20 elements which must be aligned both horizontally and vertically) I have searched…
  • Define Target Aliasing - Unable to find a corridor reference

    I'm attempting to create an intuitive template that seeks the existing terrain model but also interacts with a horizontal geometry, in this instance a Right of Way, so that the corridor will use a different end condition based on the distance of the horizontal…
  • How to process a corridor selection?

    How do I process a selection of corridors, or create a batch process, instead of having to process each corridor individually?
  • Creating a Corridor Model with a Referenced Alignment and Profile Not Working

    I am piloting a project in ORD and I am unable to create a corridor model with referenced alignment and profile geometry. A corridor and template drop are created, but they appear with no content. If the alignment and profile geometry are located in the…
  • Targeting a surface twice with an Inroads template

    Good morning / evening / afternoon all, I was wondering if there was a way to have a template target a surface twice when creating a component. I have a project where we're filling in part of a ditch between two embankments, but there's a…
  • When i made corridor slope cut is not working. Can i know how to fix this problem?

    I make corridor by basic template in Openroad. When i make corridor fill slope is working, but cut slope is not working. How to fix this problem? or there is any other way to cut terrain by corridor?? why.dgn Any comments would be appreciated…
  • When make a 2 kind of corridor, cannot merge fill slope? And corridor can't cut terrain?

    1. when i make a 2 kind of corridor, Fill slope not merge automatically?? if possible help me ! 2. finally make a corridor, but buried under the ground. Why my corridor can't cut terrain?? if can fix terrain help me!
  • Corridor processing speed

    Hi, I have a very long corridor (aprox 18km) where I am trying to model some fill around some tunnel elements. For that I am using parametric constraints and key stations so I can keep my number of templates to a minimum and the template drops the…
  • template drop behaviour around sharp corners

    is there a way to get a template to go around sharp corners like illustrated in the screenshot? What i'd like the the baviour like the multiline above the corridor with trimmed inner corner and extended outer corner geometry
  • Is there a way to turn a complex alignment into a singular piece of geometry or hide/ remove the rules that make up the alignment so the corridor isn't as crowded?

    I've created an alignment from complex horizontal geometry by drawing line geometry between survey points. So my alignment has 560 lines (which it doesn't need). I want it to be as accurate as possible but not have all these extra PI when designing. Is…
  • Corridor Modeling Workflow Advice

    I am attempting to model several alignments within a proposed site that is riddled with changing lane widths, different shoulder types, many different curb and barrier types, and countless end conditions. For this type of modeling, and to save time on…
  • [Geopak SS10] .NET Framework exception when listing plan elements to change point control

    Having selected the point control I'd like to revise from the Civil Model listing, I am attempting to change the plan element that the point control follows. I click the down arrow for that. Before I get the list, assumably as OpenRoads is assembling…
  • Corridor/Civil Cell interaction

    I'm using Power Geopak V8i SS10. Very new user. I modified my corridor a little bit, changing templates and a few things. It doesn't appear that my civil cell is tied to my corridor anymore? I had placed my civil cells to tie to my "edge of pavement…
  • Corridor with perpendicular curb

    Hi all, I am making a corridor for a road with parking, sidewalk. However, i get stuck in the position without parking lot, the curbs turn with 90 degree. I tried making a Point control horizontal alignment, however, it goes wrong. How can we…