• I am working on Open Roads SignCAD and I can't seem to find a manual?

    Does anyone have further information on how to use SignCAD? There are only a few tutorials.
  • MX road

    Dear all Do we have the tool in mx with which we can assign ground levels to our alignment string ??
  • Designing templates with PGL

    I am trying to figure out how to design my templates around my PGL. Before, Iassumed my PGL was always 0.5' below the median, and I showed all grass medians as being 2% crowned. I know this is incorrect, because the PGL location varies throughout the…
  • Mx Compound Arc between 2 Strings produces erratic results

    Mx v8i ss2. Dear colleagues, Dutch design rules usually don't request compound arcs in intersections, so this is a first for me. And an unsuccesfull one, as I get erratic results. So I tried one with minimal interference: empty model, two two-point…
  • When designing a Single Arc between 2 Strings, levels are usually correctly calculated inbetween. Sometimes they are not. How come?

    When designing an offramp according to NL design standards, 145 options are used to widen the lane and make a fluent transition between the ongoing lanes and the exit lane: design,edit gapingen 145,b8a2,b8c0,mp30,4= 1800.000,5= 1.000,7= 1800.000,10…
  • circular junction

    how to create circular junction in mx road
  • Best software for OpenRoads Design Review & Analysis

    Hi all, We are currently designing our first project in OpenRoads and are looking for Bentley PC software that can be used by design reviewers to interrogate and review our designs. I've noticed that there are a few "viewers" and "navigator" products…
  • Re: InRoads - Storm Water

    The Storm & Sanitary Design Procedures are also included in the help file delivered with the software under Supplemental Information> Storm & Sanitary. You can order copies of the documents prior to InRoads Group V8i from http://docs.bentley.com…
  • Re: AccuDraw and AccuSnap interfering with some commands

    Larry, Please file a report of the problem through the following mechanism: http://appsnet.bentley.com/srmanager/addcall.aspx Thanks, Jason Smithey