Hi there, I have a question about the use of Display Styles and Display Rules. I made a example clarify my question. This corridor contains a roadway, curb and sidewalk on both sides. I want to add a Display Style which can be used when I want…

I am trying to make a wall appear when the 2:1 slope cannot solve. Do I need a separate end condition set to the wall? I don't understand how it works. The wall should be off at all times until the cursor reaches below 3' of the 2:1 slope line…

Hi all I have a template end condition problem. When i view the cross sections it shows the entire drain on the LHS even when the NGL is sloping away from the template. So iv tried some display rules to stop this which works when testing but not in…

In order to make my design more intelligent,i create a lot of display rules in template，such as different ground elevation choose different retaining wall. it works，but when i set template interval=5m, when i set template inverval=0.1m so if i…

For example if the ditch depth is 6’ or less from the turf shoulder, then we use a 6:1 to the special ditch bottom. If it is between 6’ and 30’ from the turf shoulder we show a 6:1/4:1 to the ditch bottom. Anything deeper than that, it’s a 6:1/4:1/3:1…

Our second question on templates is in regards to end condition exceptions. In our backbone template, we have the edge of our pavement structure extending to the front slope of the ditch using the constraint "Vector-Offset" on two points (the edge…

We are new to Corridor Modeler/Roadway Designer in Geopak and have a few questions how to get things set up correctly. Our first issue is trying to use "if/then" statements on end conditions. Specifically, we want to test the slope between two points…