Hello, I am currently in the process of creating an intersection in ORD and displaying the critical components (Curb and Sidewalk) in 3D. For the SW corner (first attached image), there is a smooth arc representing the curb and then the back of the sidewalk…

Why is my Terrain created from elements doing this? These are my settings and all lines have active profiles.

I'm using Power Geopak V8i SS10. Very new user. I created the incoming road and the intersection using breaklines. The issue I am running into is that the road coming into the approach has a 6" pavement depth and the intersection has 10" I wanted to…

Hi I'm using Power Geopak V8i SS10. Very new user. I am working on modeling an intersection. I have laid out a pavement/wearing surface with edge of pavement lines. I applied my curb & gutter/sidewalk/tie as a linear template to EOP lines. When adjusting…

I'm trying to create a civil cell for an intersection that has a drop right turn lane. We have a simple T-intsersection cell that I'm trying to modify to use in our application. I first need to create a simple cell that allows for this geometry. I've…

I'm trying to cut cross sections through an intersection that has been modeled with secondary alignments. In order for the sections to look correct in the sheets I'd like to cut them as they were generated. I thought I could do this with custom linestrings…

Our client has a different design for it's side roads and entrances. Instead of a radius going from the mainline EOP to the entrance or side road EOP, there is a taper prior to the radius. Please look at the example I provided. I followed the steps…

We have a designed jug handle along with working component templates; however, Our Cut/Fill lines are ignoring the existing surface on a few of the stations when we create our cross sections. I've followed the VAOT InRoads manual closely but I can't seem…

Does anyone know if it is possible to put a gap in an alignment using InRoads? For example, I am wanting to create a single Right-of-Way alignment throughout my project but I want a gap at intersections with other roads. It would be much easier to just…

Hi, you know intersecting hor. alignment and some features such as road, river or something like that.. i am using for annotation these are trough (Triangle Symboling and Elevation Value) Tracking Tool but one by one intersection point clicking.. …