• adding additional info to the terrain file causes the profile to be moved

    I requested additional survey to be done for me project. The surveyor added the csv data into the field book for my terrain file. This caused my current vertical profile to be dramatically shifted from where it should have been. Is there a way to avoid…

  • Change the direction of the profile

    In PowerCivil it was possible to change direction of the profile from right to left. Will this be possible in ORD? We have an alignment which goes from east to west, and would we would like to change the direction of the profile so it matches. From…

  • How to show Horizontal Offset Distance from a nearest Alignment in Profile drawing

    Hi, I need to show Offset Distance from a nearest Alignment, in the Profile Data band. If anyone has annotation group with this feature, requested to share. If anyone know s how to do it, please share it. Regards Babulal sahu

  • Profile Annotations only partially populating in most cases

    Profiles I design and then cut into drawings/sheets (via Named Boundary) have, until recently, always populated with only a partial set of annotations(see example A). Recently, a profile sheet I cut populated what appears to be a full set of annotations…

  • Cross Sections/

    Hello. I have 2 questions: 1)After I open the Cross Section View, the view it s mirrored like this: Left is in the right side and right in the left side How can I solve that? 2) Where can I change the stationing in profile view? I need stations…

  • Edge of pavement lines and elevations on profile frame drawings

    Good day, I have generated a profile drawing on a frame. Projected the EOP onto the it. And want to show the EOPs levels on the framed profile. The image bellow shows the list of target aliases as empty. It doesn't even show the GeomBaseLine centerline…

  • Existing Ground Level of Edge of Pavement in Profile

    Hallo, How to Show/annotate Existing Ground Level correspondence to Edge of Pavement line in Profile view? Also can I show Existing Ground Level at any offset from PCL? Thanks in Advance, Mintu Mondal

  • Profile Creation - crashes

    I'm using Power Geopak V8i SS10. Very new user. I am working on creating a cross street alignment and profile. I have my horizontal alignment created, I open my profile view of said alignment and go to draw a profile line. As soon as I draw a profile…

  • Analysis: Height/Slope ---> Profile

    Hello, Has anyone every experienced GEOPAK SS10 crashing whenever they use the Profile tool under Analysis: Height/Slope? When trying to display proposed/existing ground I experience this problem every time no matter what project I am attempting it…

  • How can I create EOPs offset and elevation as one of the row items on a framed profile ?

    Good day, How can I create EOPs offset and elevation as one of the row items on a framed profile ? The challenge with the one that I created on the image bellow is that the elevation values displayed is for the active plan and profile alignments…

  • Re: Putting Equations in Input file reg

    I must confess that I don't have much experience using the k-value. In central Europe we usually use the vertical radius. I've setup my MX project to use the k-value for vertical alignment design: When I report the geometry points, the k-value…

  • Re: Putting Equations in Input file reg

    Hello Pooja, you can't do calculations like "001,K=&tva4/100&" as far as I know. But you can create yourself a temporary g-string for annotation purposes, for example: COPY,MyProfileDrawingModel,MyProfileDrawingModel 059 059,1=SCAL,4=8,5=100…
Communities
Support and Services
Training and Learning
Social Media