test7.dgn Original Ground.dtm Hello, I have a drawing where I am creating an intersection over terrain. I am in the process of creating alignments with profiles at each of the 4 corners for each of the flowlines and back of sidewalks (shown in red). …

I know there is a lot going on in this picture, but is there any way to prevent/stop linear feature lines from automatically connecting to the next template drop (cyan jog in EOP)?

I kind of have a multiple questions regarding Template drops and libraries 1. When synchronizing the template library to the corridor I get the error Even though it is definitely in there. Then within in the Corridor Objects Template Drops…

I have a challenge which would appear easy, but I can’t see that there are any available tools in ORD to help me, so I hope you can help. I have an alignment approx 100km long on which I would like to drop templates. I have 15 different templates…

Here's a picture of what it looks like.

We are running into some issues when modeling an intersection. We have the corridor with the template running along the mainline of our project. We also modelled both sides of the intersection. We were then attempting to create a surface on the left side…

Been trying to solve this problem for a while with no luck - hoping to get some answer here. I have a fill/ditch end condition that has priority 1 for ditch and priority 2 for filling (L_FILLCZ_TO). However, I would like the ditch to only form if…

Hi, I have a question regarding the template interval drop, more exactly can it be changed in the curved parts of the alignment. No matter how high I set the values for the interval drop (let's say 1000m), in the curved parts it is still placed at a…

I am trying to calculate volumes of different layers of asphalt and different layers of groundwork. I've created a template which contains all these layers, where the final groundwork layer is variable (slopes and ramps or not). In my template this layer…

Hi everybody I am desperately trying to export out my ConceptStation file to OpenRoads Designer to work on it further and with more tools. I followed the instructions on the wiki on exporting but I get an "export failed" error on just the .ird template…

When dropping a linear template onto an element, say a ditch template on a sidewalk element, the linear template stationing and location is all based on the sidewalk "station". This makes sense, to a degree. The issue that I've run into is if I change…