I am trying to apply an end condition exception to a template that has a right outside edge of pavement that is controlled by a horizontal feature constraint so the outside edge of pavement is able to vary (for example, at a turn lane taper transition…

Hi I have a template with pavement layers extended to End Conditions. I have applied end condition (Override) and removed "check for interception" from fill component. The constraints of the marked points are getting removed in the end condition exception…

Hi, I have a corridor which has a berm and end condition arises from the berm. I had made the end conditions as child component of the Berm. When I apply end condition exception, the end conditions do not respect the parent child relationship. The end…

I am using Uk standards Library for designing Stormwater drains. How do I add a new Feature definition/ Cell Library which is not in the Cell Library for a new Chamber (image attached for reference) in ORD. I tried using the Add New Template option and…

Hi all, I have a corridor of 4 Lane divided carriageway and I need to create a lane slopes report @ 10m interval. I ran the station base report . The camber/Lane slope in reports is calculating from centerline "CL" to carriageway edge "EOP" which is…

hello all! i try to make transition between two template. but when i edit transition can't make surface I think dot&dash line makes a surface, but when I make template always fail. How can i fix this problem?? transition test.dgn…

Hello all. Working in ORD Connect. I am working on a divided hwy with two PGLs, each with their own template drop. My typical section has 6:1 tie towns from both sides in the median forming a ditch. How do I get these 6:1 tie downs to target each other…

Hi I'm using Power Geopak V8i SS10. Very new user. I am working on modeling an intersection. I have laid out a pavement/wearing surface with edge of pavement lines. I applied my curb & gutter/sidewalk/tie as a linear template to EOP lines. When adjusting…

How do you create an overlay template for a divided highway with a single centerline in Openroads Designer?

Attached are a 4 Lane divided carriageway (with Depressed Median) Template from Indian Template set. Referring the attached images, the Cross slope (Camber) is a for LHS is shown as +2.5% from Left Median edge whereas the Cross slope for RHS is mentioned…

Hello, I was creating some corridors that ended up looking like this. I initially thought that it did not extend to the limits of the horizontal alignment because of a shorter profile. However, the profile spans the limits of the horizontal line…

I am trying to figure out how to design my templates around my PGL. Before, Iassumed my PGL was always 0.5' below the median, and I showed all grass medians as being 2% crowned. I know this is incorrect, because the PGL location varies throughout the…

Hello dear users, Is there a way to attach multiple Template Libraries at once? I would like to attach a WorkSpace Template Library, where we have our standard building blocks, and a WorkSet Template Library, which are project related. With…

I am attempting to create several general use templates for our Concepts group. I'd like to be able to modify template components more specifically - it appears the only options I have are to type in the desired dimensions. It does not give me an opportunity…

Hi, I need to generate paving grades in OpenRoads/InRoads SS4 809.903 so my workflow has been to use a graphical filter feature to select the correct features from my corridor and then export to a DTM. My problem right now is that despite having all…

I am trying to calculate volumes of different layers of asphalt and different layers of groundwork. I've created a template which contains all these layers, where the final groundwork layer is variable (slopes and ramps or not). In my template this layer…

I am trying to build a template for a retaining wall in Open Roads. How do I get the depth of the retaining wall to vary with the terrain? Also, how do I add a fill end condition at the bottom of the retaining (this also needs to vary with the terrain…

Hi all, Due to the OpenRoads ITL limitations meaning that use of a single network ITL by multiple users was fraught with danger - ie. multiple users opening a single ITL at the same time and last save overwriting others changes, OR not rereading ITL…

Working on the circulatory alignment of a roundabout, I have multiple templates dropped: where there is the circulatory roadway plus full curb and gutter adjacent to a splitter island (and usually, some bit of the splitter island) where there is…

Can civil cells clip plan geometry placed by templates? We are placing our roadway geometry (lip of gutter, face of curb, sidewalk, etc) from feature definitions via template drops. We then have civil cells created with clipping boundaries set that…

I need guideance on cross section labeling. I have an “X” that shows on my Geopak SS3 cross sections. When I annotate the sections, I do not want to annotate slope to that point. How do I remove the “x” and not annotate the slope? Where is…