Hi all, I have a corridor of 4 Lane divided carriageway and I need to create a lane slopes report @ 10m interval. I ran the station base report . The camber/Lane slope in reports is calculating from centerline "CL" to carriageway edge "EOP" which is…

Currently I am working in ORD 10.09.00.91, and we have a large project that was created in SS2 with GEOPAK. The project is still being revised but the client wants a 3D model. I built one in SS4 previously and point controls worked with the design line…

I can't help but feel there is a simple solution for this but here I am, in need of the great wisdom of the community here. I'm trying to get my road shoulder slope to vary while the slope from my centerline to the edge of travel lane fixed at 2%, while…

The method we've used to represent cross drainage in a roadway project is to create a template for the culvert. The template follows a specified flow line profile. It also has a number of display rules that may be turned on or off. These display rules…

Perhaps I am trying to use the wrong tool to do this, but I am having an issue trying to get my side slopes to draw correctly. I have a diamond interchange and I am currently modeling the ramps. I have a corridor "complete" for the mailine and the existing…

I am using Corridor modeler and am trying to build a template that ties down to existing ground at the inside edge of an existing sidewalk. This edge is drawn in a 2D file. What is the simplest way to have the template tie down to the front of sidewalk…