We have been running into an issue for awhile where we will get profiles or alignments prepared for plans by moving or modifying text that doesn't always fit what we need when ORD displays it, and when the horizontal or vertical alignment DGNs get updated…

Hi, I am trying to find a way to adjust the bar line that is connected to the leader line when I am placing a label so the bar line adjusts automatically when the text is shorter or longer than the bar line. I have made my own cell. The problem is that…

I am trying to place a label with inline leader. Example shown below. Back in SS10 when I want to move the text around, the inline leader stay with the text (and is usually parallel to the view) and the main leader moves around. I am trying to achieve…

Hello, I have been creating my own text favorites in .cel format. One of the text favorites I created is as shown below. (Station & Offset) Is there a way to make the D elimit (Circled in red in the image above) line, between my text, Dynamic so…

Hello, I'm labeling plans in ORD FDOT Connect Edition. I am using a text file do do all my labeling. I rotate the text file based on my clip boundaries before I place labels. For some reason, the labels do not follow the angle/current orientation…

I originally posted this question 2 years ago under "ORD Contour Text Orientation and how to remove the m in the Contour Text" In InRoads SS2, it is possible for the top contour text to be always on the uphill side of the contour line. How do this…

Has there been any documentation provided for bringing text into Openroads? In the past for our note sheets we have either created a text box and pasted the text into the textbox and then had to reformat the text to have it appear correctly or printed…

As my company transitions from Geopak to Openroads, we are figuring out how to do everything in Openroads that we could in Geopak. In Geopak we were able to create a profile from text using the Geopak Cogo Command Editor and then using the Design and…

Hello, I'm working on setting up my Profile Grid for my plan & profile sheets and am having some trouble getting my station & elevation text to display properly. Everything looks great in the set-up manager, but when I cut a test sheet the elevation…

I have a preference file which allows me to annotate the stationing of a horizontal alignment. In MicroStation the justification is Right Centre. If I then save as a dwg format file and then open that with MicroStation the justification is still Right…

It maybe my eye sight, but when using OpenRoads Designer Connect Edition 1 1. How do I change the text orientation so that the top of the text is on the high side of the contour line? 2. How do I get rid of the 'm' in the metric contour text?

Hi, Hopefully someone can help me, my client is looking for a GENIO format for text which includes the easting, northing, elevation, angle of the text, (in degrees from the vertical) and the text size (in cm). The supplied text is in CAD format. The…

We are having an issue plotting with Power Inroads SS2 open. When Inroads is open and we print, all our text falls on top even though the display shows the text falling under other elements. When we print the same file in just microstation (V8i ss3) this…