I am trying to apply an end condition exception to a template that has a right outside edge of pavement that is controlled by a horizontal feature constraint so the outside edge of pavement is able to vary (for example, at a turn lane taper transition…

When running templates with trigger lines in ORD, I am finding that I cannot have trigger lines on both sides of a corridor that search for the same feature definition. An example would be using a trigger line that starts left of the center of my template…

Hi There, Does anyone know if there is a fix for the tool "Create 3D By Slope To Target" which will prevent it from leaving Huge Gaps Where It Transitions From Cut To Fill. Something similar to "Use Feature Name Override" for templates? The tool is…

I am using Uk standards Library for designing Stormwater drains. How do I add a new Feature definition/ Cell Library which is not in the Cell Library for a new Chamber (image attached for reference) in ORD. I tried using the Add New Template option and…

Hello- I am experiencing weirdness with my alignment/profile in OpenRoads Designer 2021 R1. I have a 3 mile trail with many horizontal and vertical curves. I know there may have been limitations with Geopak/V8i with the number of vertices in a profile…

Ich bin relativ neu bei OpenRoads und habe einige Übungen vom LearnServer gemacht. Dort wurde das 3D Farbig dargestellt, wenn es auf Illustration/Beleuchtung ignorieren eigenstellt ist. Also zB. Die Böschung Grün die Strasse Dunkelgrau, usw. Wenn ich…

Is there any tutorial on how to publish an AVI (MP4, MPEG) movie with 3d drive through? Nice tool, but useless if it can't be saved. Lots of complicated settings that don't know how to use .

Hi All. I've been working on a project for a while and have been using OpenRoads Designer Connect Edition 2020 Release 3 until now. Everything have worked perfectly. Yesterday I installed the 2021 release 1. When creating new corridors in the 2021 release…

I just downloaded this version and am trying to model a project but the program will not open any 3D views and it crashes if get out of a file, or try to go to another one. I've attached an Exception log. I'm unable to actually model anything because…

We are facing New issues with ORD using ProjectWise, losing point controls if we check in and reopen the same file. i am controling my points from refrence files

I have a model in openroads that was created off of imported geopak profiles. This model has been updated many times with this same gpk and it correctly replaced the previous profile. However, for some reason in the last two weeks when I import the new…

OpenRoads Special Interest Group: Modeling Techniques in OpenRoads Designer: Ramps and Gores Host: Joey LouAllen; Guest Presenter: Scott Urbas May 8, 2019 - 9:00 AM EDT & 5:00 PM EDT Register Now The OpenRoads Special Interest Group meets…

Hello All, I am new to OpenRoads Designer Connect Edition. I am looking into minor grading of Basins and Channel. I am having issues with change my elements elevation. I have tried profile by constant elevation with no luck. Any one have some input…

Hello all, How do I get this ugly orange to be a concrete color. I already went to utilities > libraries and can't seem to change the color. I already selected my Concrete deck, so I don't understand why it is orange. Thank you.

Has anyone had any experience with Placing ORD geometry points in 3D along a alignment, where the Elevation is taken from the Vertical design. I can get the points to place along the alignment at set intervals at a specified elevation but not taking…

I cannot get my Corridor Objects Toolbox to open. It was working a few days ago, but now I cannot get it to pop up. I have tried it in several different corridor model dgns. It is all the same result. I will click on the tool and then select the corridor…

Hi Im new to the Openroads Designer Edition, and is experienced Civil 3D user. Is it possible, to make site design and grading in openroads with only 3D lines ( similar to featureline in Civil 3D). Without the use of corridor. Regards. S

I've created a feature definition for a manhole and defined separate templates for the plan view cells and 3D cells. However, when I place the manhole in my model it shows both the 2D and 3D cells in my 2D environment. Is there a setting that I am missing…

I am trying to update my drainage nodes to match PennDOT Roadway construction standards. Their type C inlets are Square among other things and i need to find a way to create custom Drainage nodes. Is this possible?

Hello everyone, I have been surveying and designing civil projects for 15 years. Most of that time worked with GEOPAK. When we processed surveys with the .smd the linework was generated and gave the designer a view of the site on the computer. A .tin…

I need to drape 2d dgn lines and curves onto Geopak TIN file? I found the tool but sure about the settings and workflow. Did a search of the Geopak help files did not produce results. The work is very distilled below: 1. Client provides source files…

I am attempting to place some civil cells in a design file and am running into errors. In the plan view (top down) everything looks correct, but in isometric views, the civil cell is always attached to the surrounding terrain or template drops. the civil…