From what I can tell, plan and profile annotation groups are set in the base geometry file's feature symbology settings. My problem is, I have other exhibits that use the same alignment but I want to use a different annotation group for the plan and profile…

I'm having an issue with my alignment auto annotating in certain circumstances. If I create my horizontal geometry with simple lines and arcs or Complex by PI and then chain it, the stationing appears. However, if I create an alignment with Simple Lines…

Hello everyone, I will design an alignment for an oil pipeline. And the project requires 3D stationing. I found the 3D alignment task but is there a way to annotate in 3D? I am using InRoads V8i SS2. Thanks in advance.

Dear All, I need to add curve annotation in my plan view as per client's requirements. In this regard, how to add curve number in the curve annotation in openroads designer?

Dear All, I have created longitudinal section using input Marco. I am getting the following output as attached. I want to display the vertical schematic instead of vertical geometry details on top. please guide me where shall i have to change the…

How do I adjust the distances shown in the capture (red lines)? Is this a function of the SMD file? version info below:

Is there a way to create custom leader lines for annotating cross sections in Geopak SS3? Currently I am using cells that I created associated with the feature lines built into the template. They display in certain areas instead of the default "X". It…

Using SS4 - Open Roads. Have been using cross section annotation and was working just fine. Today nothing is working at all. Is there something that is may be "looking" for and not finding? Checked the template in the corridor and it seems fine. Any suggestions…

Hi There, I am new to the forum and I have tried to look for what I am trying to do. Basically I have a spreadsheet of OLE structures with easting, northing and a designated name this is typically in the format, B85+05 I have automated the spreadsheet…

I imported an existing vertical alignment from a profile. When I annotate it to show the existing grades, it shows the grades for every minor change and it is impossible to read. Is there a way to set a certain interval to annotate the tangent grades…

Hello All, Let me start with a description of the work.. Approx. 130 Miles of Proposed Track to run along existing Track. Approx. 260 Grade Crossings. Is there anyway to automatically import Track Vertical Elevation for each Cut of Roadway Grade…

In version 08.09.01.45 Negative shoves all the annotation to the left of the initial point, Positive shoves it to the right, and Equal is supposed to array them out from the middle point. In 08.09.08.06 and 08.09.02.16 the "Equal" seems to be broken.…

Hello there, The issue is that when I create new cogo points, In-roads provide a text with Easting, Northing and Elevation in the default level. Is there any way to turn off/on this feature??? Thanks & Regards

I have a problem with the Reports and Annotation of cross sections. After creating a surface with the Modeler, I created cross sections and ran the Cross Section Report and annotation. Everything was working fine. But when I made a new set of cross sections…

I am a new geopak user and am attempting to label cross sections which I have cut using my existing ground surface and my finished grade surface generated using the corridor modeler. I have tried three different ways to label the elevations and offsets…

Hi all, using Geopak in MS v8i 08.11.07.443 I've placed labels using Plan View Labeler and now my grading changed. So I go back to Labeler and choose Tools>Label Updater. Choose my labels to be updated, choose Select by: Selection Set, click Start…

Hello there, When I use the horizontal tracking option, the message center record every movement along the selected horizontal alignment, is there any way that i can make the message center record the points that I select only, because i want to copy…

HI All, I like to know if I can rotate "InRoads Survey Custom Operations" like AC="Cellname" or 'Textlines with the acutal angle of the line that is already started: FWD:example POS 34 FCRD N: 5507977.325 E: 3405893.521 Z: 250.432 CODE WTRLN…

I am getting these problems while annotating. Pls help me out

I have an alignment with horizontal and vertical. But now I want to add a profile. I've tried coping the alignment to another model and vertical design normaly. But I can't show detail annotation for both profiles. How do I create profile drawing with…