• DGN to DWG: Complex elements disappear

    We were converting our dgns for our sub to use in AutoCAD and some of our complex elements were not converting. In one case, I was able to simplify the geometry and it worked, but for the two other complex elements in the file that weren't converting…

  • Annotation des côtes des courbes de niveau "en dur" pour export hors univers Bentley

    L'annotation automatique des courbes de niveau des Terrains ne survit pas à l'export dans un format autre que DGN, et en particulier à l'enregistrement sous DWG. Pour palier à cela, il est possible en quelques étapes de générer "en dur" les côtes. …

  • How to convert Thematic Height Display in DGN format to DWG?

    Hi, Is it possible to convert a DGN with Thematic Height Display (Delta Terrain) to DWG without loosing the display style? Thematic Height Display needs to be brought into GIS. Using OpenRoads. Thanks.

  • fichier de paramétrage de l'export DWG depuis OpenRoads Designer 10.10.21.04

    L'emploi de ce fichier est détaillé dans cet article
    • ORDtoDWG_2021R2.dws

  • Suppression des BSplines à l'export DWG

    Les Autocadistes ont des problèmes avec les BSpines qui sont utilisées par OpenRoads pour représenter les clothoïdes. La solution pour supprimer les Bsplines et les remplacer par des lignes brisées est la suivante: Suppprimer les données OpenRoads…

  • OpenRoads Designer does not work when Autodesk is installed.

    Product(s): OpenRoads Designer Version(s): 10.10+ Area: General Question: I installed AutoCAD using a third party provider and now I cannot use OpenRoads Designer when it is installed. How can I fix this? Answer: …

  • Excavation plan with ORD 2020

    There are different excavation depths and different excavation slopes on the basis of the building, whose photographs I have attached. I prepared this excavation plan with Civil3D. How can I make such an excavation plan with openroads? I have to work…

  • ORD Cross section Components vanishing when exporting to dwg for AutoCAD.

    I am using OpenRoads Designer CONNECT Edition - 2020 Release 2, and AuoCAD 2020. Any advice and help would be appreciated. Regards

  • CADD Operator: MicroStation and AutoCAD Rhea Engineers & Consultants, Inc. – Valencia, PA

    CADD Operator: MicroStation and AutoCAD Rhea Engineers & Consultants, Inc. – Valencia, PA Company Founded in Pittsburgh, Pennsylvania in 2001, Rhea Engineers & Consultants, Inc. (Rhea) is a 100 percent woman-owned professional corporation providing…

  • Error referencing AutoCAD files...

    I am running FDOT SS4 MR11 and I am getting an error when I try to reference a .dwg file sent to me by a sub-consultant. The error says that the file type is not supported. I am also running the most recent version of RealDWG. My early research tells…

  • OpenRoads Designer with AutoCAD

    Product(s): OpenRoads Designer Version(s): 10.04.00.48 Area: Installation Question: Is OpenRoads Designer able to integrate with AutoCAD? Previously users were given an option to open design files and then launch InRoads…

  • [MX SS4] DWG export - model as layout

    Hello, I moved to MX SS4 and encountered a problem with export to DWG. While saving a cross section drawing to DWG a content is moved to AutoCAD layout instead of model. I suppose it is connected with some settings I don't know (I don't work on MS)…

  • Platform compatibility

    Applies To Product(s): MXRoad, Geopak, Powercivil, Inroads, Open Roads Technology, Open Roads Concept Station Version(s): Various Environment: N/A Area: General Subarea: N/A …

  • Profiles & Cross Sections Created in DWG Mode Have No Intelligence

    Product(s): InRoads Version(s): 08.11.07+ Area: Cross Sections/Profiles Problem: Profiles and cross sections created in DWG mode are not recognized when the DWG is reopened. Answer: This issue can be resolved with the…

  • DWG is not in a recognized file format

    Problem Description: When trying to open a dwg file an error message is displayed, stating "[file_path\.dwg] is not in a recognized file format" Reason: When you open a higher version of dwg file in a lower version MS RealDWG, this message is…

  • Export To DWG

    Problem Description : Export to dwg, linestyles does not appear as in MXRoad SS2 Solution: Following are the points to note while exporting to dwg: 1. Use "File > Save As" option from the CAD menu, instead of "File > Export > AutoCAD dwg". Save…

  • MXROAD Genio File Format Cross Section Editing on Autocad

    This tool is for edit MXROAD genio file format cross section and InRoads pen code format cross section on Autocad. 720p HD format video is available at, http://www.youtube.com/watch?v=eWD-tBKia28

  • Confirmation of AutoCAD Compatibility

    Applies To Product(s): InRoads Version(s): 08.11.07.615 Environment: N/A Area: General Subarea: Original Author: Sanders Thomas, Bentley Technical Support Group …

  • InRoads SS3 on AutoCAD

    Applies To Product(s): InRoads Version(s): 08.11.09.493 Environment: N/A Area: Installation Subarea: Original Author: Kevin…

  • Converting InRoads DTM to different Civil Software surface formats

    Applies To Product(s): InRoads Version(s): 08.11.07.615 Environment: N/A Area: Translator Subarea: LandXML Translator Original Author: Chris Key, Bentley Technical Support…

  • Using Bentley Civil Applications to View Autodesk Civil 3D DWG Objects

    Moving data from other formats always tends to be tedious process. It is even more frustration to use the Civil Engineering data contained in these files and move it to your Bentley Civil software. In the past, you would look into Autodesk's C3d DWG and…

  • Viewing Autodesk Civil 3D DWG Objects with Bentley Civil Applications

    Moving data from other formats always tends to be tedious process. It is even more frustration to use the Civil Engineering data contained in these files and move it to your Bentley Civil software. In the past, you would look into Autodesk's C3d DWG and…

  • Re: MX V8i ss1 - AutoDesk Object enablers

    Gunther, Please check the wiki page I just added. I believe this will help you out. Remember (SELECTseries 1) Products require you to download "Bentley V8i (SELECTseries 1) - Autodesk Real DWG 2010". Another note MicroStation (SELECTseries 2) delivers…

  • Cross Section Output

    Hi guys, My boss has asked me to look into this one. A Contractor on a recent job informed him of receiving a Cross-Section package of 11x17 drawings with each cross section on each individual sheet, containing all volume and annotation information…

  • Re: Associating CAD model with MX

    Aleksander, Sorry for the false hope but I have no solution to this frequent problem of mine. Sometimes changing display and back again (several times) "solves" the problem. In my scenario, I'm trying to open a DWG from the CAD menu, but the drawing…
Communities
Support and Services
Training and Learning
Social Media