Hi Everyone, Our firm is having a recurring problem with our cross section labeling. We are creating our cross sections from corridor models. Once we have the cross sections cut, we only have 50-75% of the necessary cross hairs populated to annotate…

Within a ORD Corridor Template, can a EOP Point target a Feature Definition, Horizontal & Vertical as a Priority #1 and if that line is not found, can that same template point target a Active Terrain (I have an FG Surface that I am reconstructing) as…

I am using Openroads Update 9 and have updated an alignment, but the corridor has not processed correctly. The alignment is in a seperate reference file and was updated using a complex redefine of the plan geometry. The profile was then adjusted to…

Bonjour Sur cette affaire le profil type est devenu tout plat Alors que si j'édite le profil du corridor il n'est pas plat ?? Comment c'est possible ?? dans la petite visu en bas à gauche on le voit plat ??? dans le corridor tout fonctionne…

Bonjour Je reviens sur les talus ultra simple et leur contrôle. Je sais qu'on arrive à contrôler l'altitude du départ de talus (ou digue), soit par le profil type, soit par un élément extérieur qui donne l'altitude grâce à un projet. J'essaie de contrôler…

Bonjour Je suis en train d'essayer les transition de corridor j'ai coupé un corridor simple : J'ai édité le profil type du deuxième tronçon et j'ai changé la longueur du haut de la digue, je suis passé de 2 m à 5 m Je créé une transition : elle…

Hi, I am trying to find a way to plot plan drawing with a corridor 3d model attached to the 2d model of the drawing dgn, that would show in the PDF as close as possible to the normal appearance when using Smooth or Illustration display style i.e. with…

I'm using Power Geopak V8i SS10. Very new user. I modified my corridor a little bit, changing templates and a few things. It doesn't appear that my civil cell is tied to my corridor anymore? I had placed my civil cells to tie to my "edge of pavement…

I'm using Power Geopak V8i SS10. Very new user. I am trying to clip my corridor at the basic T civil cell I have intalled, I thought I could just mask my corridor but the intelligence will still be there and show up at on my proposed cross sections…

I am currently moving various parts of a project model from Inroads to Openroads and need to export a corridor template within Inroads. I only have access to the corridor file itself and not the datasource. Is there a way to export the corridor template…

After creating and finishing a project using ConceptStation, I exported the project's elements to be used into ORD. The first time I tried to import the .ird I got the message that I had not imported the horizontal and vertical geometry beforehand. Therefore…

The above picture show the problem I'm facing. Is there a way to make ORD apply the 3% based on the modified point instead of the original?

I am running InRoads SS4. I am trying to calculate cut but only in a certain part of the road. I have changed my template so I can ignore the components I need to in order to get that certain section. My issue is the following: there is a column in the…

The reference element (centerline) for my corridors has become corrupt. It I touch the corrupted element UStn crashes. It is corrupt in my backups. It there a tool/method that allows me to change the reference element of a corridor to a different element…

I have several corridors in different DGNs. Is it possible to run a batch process to process the different corridors? How would i go about doing this? Also i have several different alignments/profiles. Is it possible to run a batch process to export…

My template is set up with priorities to solve for several cut and fill conditions. The guardrail end condition has the highest numerical priority and solved last. Naturally, this creates "pockets" of the guardrail shoulder condition along a corridor…

I have been trying to move from InRoads Suite to OpenRoads Designer. I have a design in ORD which has two intersection realignments and a main drainage way relocation. I have three road corridors and a ditch line corridor created. Now I have to mash all…

OpenRoads designer CONNECT Edition Version 10.07.01.32 I deleted a corrido, but the barriers remain. I tried everything I can to delete it(including DROP ELEMENT and DELETE both in 2D and 3D models) .Is there anything I can do now to erase it and rescue…

I am creating a 3D model for an urban, multi-lane widening project for FDOT. At the beginning and end of the project there is no profile grade required, since I am connecting to the existing pavement by milling (stripping) and resurfacing (overlay). From…

Hello all, Every time I add a clip reference the corridor seems to crash into itself.

This seemed like a simple question that someone has definitely asked before but I can't seem to find the answer to - I apologize if this is a common question. When creating the corridor model - as I drop template through different interval of station…

I have an issue with the tool Profile From Surface for a complex element combining multiple ditch line and not sure if this is how it was intended to work or I'm just doing something wrong. The profile draws normally until it reaches an area where the…

Hi Whenever I make a new corridor, the corridor feature lines seem to end up on the default level I have on. I am working on projectwise and my workmates don't seem to have the same setting. They go on different levels depending on what component that…