Hello Everyone, My target is to create Cross Sections file with points (from point cloud) in Autocad format. I completed the below steps. Point clouds are attached to 3d model (POD file format) Cross Sections are created. Point Clouds are…

I want to set up an annotation definition to apply an elevation annotation on the lower of two points (As shown below). I've tried applying different variations of the annotation filter shown below but haven't had any luck, Does anyone have any…

I have just realized that cross sections plot much faster if you have the 3D-Default model view attributes set to Wireframe before creating the named boundaries and drawing/sheet models. If the 3D model is set to Illustration or some other 'modeling'…

I am in the process of creating named boundaries for a roadway section to eventually cut sheets. After placing name boundaries every 50 feet along the alignment, I have realized that I would have liked to have a few of these cross sections cut at locations…

Hello, I am preparing cross sections for a project. The template is two 12' lanes @ normal cross slope (2%) projected from the existing right edge of pavement (see drawing attached). We are holding the Right EOP elevation along the existing curb line…

Good morning, I have a skewed roadway segment. I was using the "Civil Cross section 2 Points" tool to get my section from my corridor. However, I dont know if there is a tool to get the same cross sections along the approach I mean at intervals. I'm using…

Hello, I have cut cross sections from a basemap into drawing and sheet views. I have modified the color of the cross section and the associated layers to make it to be 224, which corresponds to a shade of gray in my company's pen table. However, it…

I am creating cross section sheets, and when I create the sheets, in the Create Drawing window, I change the name of the first Sheet Model to the first sheet number, "X1". I'd like the drawing models and the saved views to remain as the station of the…

I would like to be able to annotate slopes manually using the civil labeler. (Or any tool, really). Any text favorite I use gives me a slope of zero percent. I can only seem to find one that lets me select by element, not 2 points. Either would be…

I am attempting to create a new annotation group(s) to function with the new feature definitions I created for Phased construction. I needed to customize the DGNLIB a bit and configure to read from my edited file for the library. Everything seems to be…

Hello all, I've cut cross-section sheets off the alignment at 25' increments (urban job). After having gotten the cross-sections to self annotate things such as existing fence lines, driveway slopes, and existing buildings via the annotation groups…

When I cut my cross sections, I had my curb return model referenced into the sheets as they were cut, and they have even been annotated with the Drawing Model Annotation tool. Now that I need to print the sheets, the curb return model is turned off in…

Is it possible to split a template and add something in between a single pavement section template? In this particular case I am trying to add a raised median to a section that was made for a flush median. Instead of rebuilding the template I would like…

Has anybody come up with a way to prevent the stacking (or bunching) of Cross Section Annotations in the Annotation Group Settings? One way I have used in the past is setting specific ITL points within the Annotation Group to label, but that only works…

I am trying to get excavation cut and fill quantities for a project. There will be a section of the terrain that will be cut and then there will be a fill placed on top of that. I'm trying to figure out what tools to use to achieve this. Would I create…

I'm going insane trying to figure this out, I'm pretty sure this is the easiest fix in the world but I'm just too ignorant. I have two surfaces, one is from an old survey and one is a new one. All I want to do is overlay them, display cut and fills…

Hello, Typically, we use the points from the template for slope, so i was thinking to use the points for the width annotation. However, our workspace does not have an existing "width" annotation group so I am unsure how to add the expression to annotate…

ORD CE Version 2021 Release 1 While creating cross sections, our Texas office is encountering issues with the overlap of annotations in the sheet view. If you were to go to the model view all is fine. Does anyone know: Why is this occuring? I…

I notice that if I add ORD Cross Section sheet models to a Sheet Index and/or a Print Organizer pset that they default to Rasterized. Plan or Plan-Profile, etc. default to non-rasterized (Rasterized box NOT checked). Rasterized plots turn out a little…

Is it possible to export Openroads Cross Section sheets to the DWG model space instead of as sheets in the DWG as seen below?

I am using Open Roads Designer (2021 Release 2) 10.10.21.04, FDOT connect. The issue I have been having is that I designed a whole drainage network, had cut cross sections and was labeling the cross sections. I noticed yesterday when I am looking at…

Hi, I am creating cross section sheet the value of lane slope is roundoff like 2.36% to 2.4%. How can i edit and precise my lane slope value in cross section sheet. Thanks

I have existing utilities files that have feature definitions assigned in both alignment and profile and the profiles for the alignments are active. The feature definitions have an element template defined that have a cel associated with the point. The…

Hello, I am looking for some specific help with a cross section grid annotation issue that my coworker and I are experiencing. We have both recently transitioned from V8i to ORD CE 2021 R2 and have been scouring the forum (and google) for specific…

Hello, For several days I had problem with change slope on road ramp. I checked definition of superelevation section, lanes and transition. Also I checked templete library and top pavement have 3 points with correct cointraints and superelevation flag…