I started working on this project approximately a year ago with a previous ORD release and have now come back to it after our CADD Manager upgraded me to ORD CE - 2022 Release 3 (10.12.02.4). I went to adjust my Catchment Areas and received the attached…

Hello ! I'm getting this error after running my network. "Capacity for Inlet 11B Exceeded Bypass Flow Unassigned" Does anybody know what this error means and how to fix it ? Any suggestion is highly appreciated. Thanks. RE

Current Version: Power GEOPAK V8i (SS10) I am in the process of starting a new drainage design and am trying to determine the most efficient workflow in order to provide the following: - 2D Drainage Layout - Inlet and Pipe Computations - Drainage…

I recently had to update the trunkline for a drainage network. I am updating the hydraulic run to outfall but when i click the prompts, I get an exception log. If I use the hydraulic run from node and click the last node and click the outfall it…

I am using Open Roads Designer (2021 Release 2) 10.10.21.04, FDOT connect. The issue I have been having is that I designed a whole drainage network, had cut cross sections and was labeling the cross sections. I noticed yesterday when I am looking at…

I created a custom drainage node. I want it to skew and shift it orientation with respect to the inlet. I changed the rotation and location of the bottom cell with respect to the alignment line and the point, however the cell translation has not updated…

I am attempting to support an Engineer that is unable to work with the drainage menu in InRoads V8i. Some Googling showed we should be able to create an sdb file. When going to File | New there is no drainage option. Reading the same article it appears…

I am attempting to support an Engineer that is unable to work with the drainage menu in InRoads V8i. Some Googling showed we should be able to create an sdb file. When going to File | New there is no drainage option. Reading the same article it appears…

Hello, I want to insert an embankment into my pond in ORD 2021 release 1. The enbankment should be on the elevation 27.90 and the bottom level is on the elevation 27. I already created a solid element that presents the embankment (pink one): …

I am using Uk standards Library for designing Stormwater drains. How do I add a new Feature definition/ Cell Library which is not in the Cell Library for a new Chamber (image attached for reference) in ORD. I tried using the Add New Template option and…

Does anyone know where do change the settings related to where the catchments see the grate location and dimensions? This is in OpenRoads Designer 2022 R1. In the example below I have a combination intake. The magenta catchment is linked to the intake…

Hello everyone, This is my first time making drainage profiles in OpenRoads Designer from a model that is imported from Civilstorm. My team and I seem to be experiencing quite a few issues with them and I'm wondering if anyone else has encountered glitches…

Hello All, I started my drainage model by placing the network without adjusting any of the conduit inverts. However, when I want to change an invert whether it is the upstream or downstream invert, it does not change and will change back to the original…

I am working in MicroStation Power GEOPAK V8i. I have a terrain file, existing ground, corridors, etc. all working no problem. I am attempting to model in a detention pond for a storm sewer design. The current iteration for the "pond" will be a detention…

Hello, I am currently placing inlets, to automate getting the longitudinal values. I am attaching a reference terrain to the inlets. I had merged my existing and proposed terrain into one combined final terrain. I am placing my inlets. The longitudinal…

Hi, I'm trying to update a storm drain invert in a SUDA model and it won't allow me to and is crashing. It is giving me a "System.NullReferenceException" I am trying to update it in the utility properties as I don't want it tied to the invert of the…

Hello, Is there a way to turn off the feature where when you modify a vertices of a drainage catchment ( in the drainage and utilities workflow) it modifies all catchments with that shared line. It is a difficult feature to work with because a lot…

Is there a way to deactivate the Drainage and Utilities Design once its loaded into a basemap? I accidentally opened it in a file I didn't want it in and now it loads every time I get into my road modeling file. I have a different drainage basemap, so…

When I try to run my base analysis scenario, I get the following error message: 44008 "Base Analysis" "Catchment" "338" "1" (N/A) "The catchment is active but there is no outflow element specified, or the element is invalid or deleted. " Hydraulic…

Hi, Is there a way to model roadside ditches conveying overflow discharges to inlets (grate inlets) downstream that are a part of a storm drain system of an open section road without curbs. I could only find information about Curb/gutter. there are…

Hello, I am operating OpenRoads Designer Connect Edition 2020 Release 3. I have a DGN file that is just a bunch of lines. These lines have elevations associated with them and are considered to be in an older vertical datum which I would like to update…

Hello, I am running spread analysis using ORD Utilities and Drainage workflow. Since this is our first project with the software, we are back checking its results with our trusty Excel sheets that are set up for spread analysis. For our spread calculations…

Im putting in a new drainage structure that will be connected to an existing pipe. The design involves putting in 4 new feet of pipe at the structure and then attaching it with a concrete collar. Im not sure how I can draw this in ORD. Part of the pipe…

I drew up an existing drainage network (pipes, manholes, etc.) for a road. I did this by creating a MODLRD file and manaully drawing up all the pipes and nodes for that area based off of survey. Now I want to add inlets, manholes and pipes for my…