My company currently uses GeoPak as the primary software for road design. Currently IT is pushing to transition to OpenRoads. Correct me if I'm wrong but OpenRoads is the all encompassing program that will take the place of InRoads and GeoPak. My question…

I am trying to generate cross slope report @ 10 m interval by station base or station offset report but i am not getting appropriate values of cross slope in report. It seems correctly in cross-section view. Am missing something ?? Images is ready for…

I am working in MicroStation Power GEOPAK V8i. I have a terrain file, existing ground, corridors, etc. all working no problem. I am attempting to model in a detention pond for a storm sewer design. The current iteration for the "pond" will be a detention…

Hello Team, Currently in our project, we are going through our templates adding "Vertical Point Controls" due some special ditch elevations. Our template (shown below) consists of a 6:1 after the turf, a 4:1 then our ditch. At some points in our project…

In GEOPAK is there a simple way to divide a complex chain into equal length segments? I have a chain that is comprised of a line segment and curve. I would like to be able to divide the chain similar to dividing a line or curve without doing so segmentally…

Tengo un problema grave. He generado todo mi proyecto en OPenRoads Designer. El cliente pide los archivos en formato DWG, entonces he exportado mis archivos a DWG. El problema se presenta cuando se abren los archivos DWG y no aparecen nada más que las…

I am trying to label cross section that I already have drawn. When I click the 'Cross Section Labeling' button, I get the error "Job number cannot be found in the active directory." and prevents me from labeling cross sections. Anyone familiar with this…

Is it possible to edit a profile after the "profile complex by elements" has been used? I have a proposed bike path profile that needs more PIs added to it. I want two line segments to replace 6 different lines. Is this possible without having to redo…

Regular_Seed.dgn file_breaking_seed.dgn Hey there, So, I have our seed, and our client's seed. I am trying to figure out where to find the variable that is causing these sue/suda nodes and conduits to place way out in left field, when the…

Using the corridor modeler, I've created cross sections and I'm trying to label them. I've created my label styles and when I 'Draw Labels', all of the labels overlap on the top cross sections and don't label the cross sections below. I'm doing columns…

Using the corridor modeler, I've created cross sections and I'm trying to label them. I've created my label styles and when I 'Draw Labels', all of the labels overlap on the top cross sections and don't label the cross sections below. I'm doing columns…

Is it possible to add sewer lines that do not fall within the limits of the reference TIN in Geopak Water & Sewer? For example, I have existing sanitary sewer lines (with known inverts) that extend beyond the limits of the TIN, but the program will not…

Hi, I want to create 3D terrain file from available data in TNRIS. There are some available file types: LIDAR cloud points (LAZ), Disc Image File (IMG) and corresponding XML Documents. I tried "Import terrain model from file" command in OenRoad. The…

I have a ddb file that i would like to add some items to to show existing pipe as a different linestyle but it seems to be password protected. Is there any way to remove this password?

I am encountering an error message "Cannot open source file" whenever I try to analyze or design a network in GEOPAK drainage. I reconstructed a totally blank project with only a small area, a node, an outfall, and the connecting pipe to ensure it was…

Need advice on transitioning from Windows 7 to Windows 10 and being SS2 compatible for the client (NCDOT). Their current software requirements are listed below, but you'll notice that corridor modeling workflows are to remain in Geopak SS2. My understanding…

Hello, I am using PowerGEOPAK SS4 and my dgn file has about 15 models so it takes forever to close a file (at least 5-10 minutes) because of the Status "Scanning Model: x" dialogue box that goes through every single model. Does anyone have the same…

I am running FDOT SS4 MR11 and I am getting an error when I try to reference a .dwg file sent to me by a sub-consultant. The error says that the file type is not supported. I am also running the most recent version of RealDWG. My early research tells…

I have a model in openroads that was created off of imported geopak profiles. This model has been updated many times with this same gpk and it correctly replaced the previous profile. However, for some reason in the last two weeks when I import the new…

Installed the newly released Microstation V8i SS10 8.11.09.908 with Geopak SS4 8.11.9.878 but getting an error similar to another post about Inroads and Microstation SS10. Will there be a Geopak release that's compatible with this new Microstation V8i…

I'm running GEOPAK SS2 (version number in subject line). I got a new computer running Windows 10 a couple months ago, and ever since then I've been unable to run any VBA macros in either GEOPAK or vanilla MicroStation. Our local DOT (Tennessee) also has…

Can you help me to give the website todownload the software?

I cannot get my Corridor Objects Toolbox to open. It was working a few days ago, but now I cannot get it to pop up. I have tried it in several different corridor model dgns. It is all the same result. I will click on the tool and then select the corridor…