I need to create a 3-referenced line driveway civil cell that has to meet two criterias for its edge of pavement: -2% slope from the driveway centerline and ties into existing terrain where the ROW begins. To add an additional constraint, I selected a…

My Power Geopak (SELECTseries 10) crashes every time I try to plot a profile. When I use the Design & Computation Manager as soon as I try to choose my PGL Chain the program freezes, and then I have to force quit it. I get the same result when trying…

I created and chained my horizontal alignment using horizontal geometry tools, created and chained a profile for that alignment using vertical geometry tools. I then change the name of my horizontal geometry and my profile no longer appears in COGO. I…

I have an issue with the tool Profile From Surface for a complex element combining multiple ditch line and not sure if this is how it was intended to work or I'm just doing something wrong. The profile draws normally until it reaches an area where the…

I can import my Horizontal alignment information using the .gpk file into ORD using the "import geometry" tool. But can not get the vertical alignment information imported. ORD version: 10.06.00.38

Should the borehole navigator recognize the station equations within the existing profile cell automatically? I have entered the correct chain, geopak regions, and the borings are being displayed at the correct elevations. However, after the first station…

This concerns Geopak Road Tools. When I click on draw profile, then place profile cell, it immediately goes to the placing of the cell before I can edit the station, elevation, horizontal scale, and vertical scale. Editing the text in the cell afterwards…

I am having some problems using Geopak Water and Sewer. I have one sewer line that drains east that connects to another line that drains west. Whenever I attempt to create a profile of the second line an error window pops up saying, " Invalid Profile…

Generating stormwater conveyance system profiles. We set up a custom drainage library, created and analyzed a network. When generating a profile of the network the nodes are shown as single lines. I haven't been able to determine where I need to define…

Team - I have a completed project. I have to add a station equation to my base centerline to acomplish an alignment change (long story). Now I have to incorporate that station equation into my profile(s). However, when I try to load the original…

Hello, Ok, I know my subject sounds like a stupid question--why would one add a station equation if the ahead station is equal to the back station? The short answer: to (possibly) cut down on work later. Can one add a station equation to an alignment…

When I generate a Drainage Profile, I see that Library items from my DOT show up with the appropriate width and invert drop across the structure. The nodes that I create myself, however, show up as straight lines with no elevation drop. I've looked all…