• Key Point Annotation in Cross Section

    I have cross sections that I'm satisfied with but the annotation isn't cooperating the way I'd expect. I have selected the centerline (as well as BOC_Top, see attached image) as a crossing feature and it displays the circle in the correct location within…

  • end conditions going wrong direction

    I have the cut and fill set to project to surface to the right on the right side of the assembly and a second constraint to be 3:1 grade. The issue is evident by looking at the picture but I don't know what is occurring within the template

  • Can't save the SS2 Roadway Design Ird File

    Hi, I was working on addressing the model with Inroads SS2, I updated the Roadway Design IRD file, but can't save it if I choose to Process All/ Process Visible Range. Please see the snapshot below. I try to reduce the file size to cut the road distance…

  • 3D Stationing

    Hello everyone, I will design an alignment for an oil pipeline. And the project requires 3D stationing. I found the 3D alignment task but is there a way to annotate in 3D? I am using InRoads V8i SS2. Thanks in advance.

  • spot elevation report, cogo point vs dtm for elev. report

    i have a text file, 50 points, with No elevations (Horizontal only) . they are coincident with an EG dtm. is there a xml report that will report out what the EG elevations are, at each horizontal location associated with the text file?

  • Inroads V8i SS2 end condition exception with superelevation doesn't work

    first the product details as i am using older version Microstation V8i SS3 V-08.11.09.714 Inroads V8i SS2 V-08.11.07.566 Problem: I have created a model for an realignment road works. I have a location where I want different end condition solution…

  • InRoads V8i Plan and Profile Generator

    Using InRoads V8i SS2, I want to cut double plan view sheets. The problem is that I want the sheet layout along the alignment, but doing so locks the number of views to 1. If I layout along the grid, it allows two views, but then the sheets are off in…

  • RE: Create Cut/Fill Map between Surfaces

    Is there another way to easily display the "0" contour if the "Evaluation > Hydrology and Hydraulics > pass Through Contours" tool is not an available add-on on my version? I am running PowerSurvey V8i (08.11.09.674). I am trying to show that 18 inches…

  • Alignment Equality question, InRoads V8i, SS2

    If I have a roadway centerline alignment DE1, and an alignment Wall-RT for a retaining wall along the shoulder point, I'd like to know if there is a simple way to determine the wall station that corresponds to each 50' centerline station along the roadway…

  • Customizing Cross Section Elevation limits

    I often create As-Built survey Cross Sections using an .soe ASCII file. I then have to match these 'homemade sections" to a set of plan Cross Sections. Often the plan Cross Sections have high/low elevation limits which vary widely from section to section…

  • Creating a Centerline Alignment Between Two Horizontal Alignments

    Product(s): InRoads Version(s): 08.11.07+ Area: Geometry Design This workflow will demonstrate how to create a “best fit” centerline alignment between two edge of pavement horizontal alignments. For this example, there are…

  • Importing Pay Items

    Applies To Product(s): InRoads Version(s): V08.11+ Environment: N/A Area: N/A Subarea: N/A Original Author: Bentley Technical…

  • Displaying Components in Cross Section Sets

    Product(s): InRoads Version(s): 08.11.07+ Area: Cross Sections Original Author: Jacquelyn Pettus, Bentley Technical Support Group To display components in existing cross sections, you should use the Evaluation>Cross…

  • Survey: Delete Temporary Survey Graphics

    Problem: When opening a design file in Microstation alone, temporary survey graphics that have been previously displayed remain in the file. or When opening a design file with InRoads and MicroStation, graphics are visible until a MicroStation command…

  • Problems Annotating Cross Sections

    Product(s): InRoads Version(s): 08.11.07+ Area: Cross Sections Original Author: Bentley Technical Support Group When running the Annotate Cross Section command, first verify the objects (components and/or crossing features…

  • XIN Manager ?

    Re: XIN Manager ? by caddcop I have found that it is possible to create reports on many of the feature settings for the XML XIN reports and with those, develop a plan of attack for edits. The results can be very similar to the CSV export. Sadly, you…

  • Component Volumes?

    Anonymous
    Anonymous
    I am working in InRoads V8i, and I would like to get the volumes in my cross sections of several component shapes that I have displayed. The problem I am currently having though, is it will only display the volumes for components in the volume reports…

  • AutoCAD platform

    Does Bentley InRoads Site V8i currently support the AutoCAD 2013 platform? If not, when is this likely to occur and is there a commitment to continue supporting progressive AutoCAD platforms in future?

  • Re: Feature XYZ Target

    You can't specify a slope, and an offset, and a target feature offset, and a target feature elevation. That's 4 constraints! What if the feature elevation conflicted with 2 of the others? In this case, Feature XYZ ignores those other constraints in the…

  • Re: View Stationing

    Ólafur, I filed D-58889 for this. I apologize for the inconvenience. Thanks, Jason Smithey

  • How to show Low/High Points of a Surface (dtm)

    Hello there! I have this issue, when i was done creating a surface (dtm) using Inroads, i wanted to view the low/high points of that surface, so is there any way to view them using InRoads??? Thanks & Regards, Imad Balich

  • Civil Geometry

    IR V8i SS1 .246 How do you edit the menu for the Applications > InRoads Group in MicroStation V8i SS1? The Workspace > Customize > MenuBar InRoads Group does not allow edits. We'd like to restrict the InRoads product options because of licensing concerns…

  • InRoads Storm and Sanitary - HGL and EGL

    Mstn v8i SelectSeries3 - v08.11.09.357 InRoads v8i SelectSeries2 - v08.11.07.566 I'm having a problem with the EGL/HGL calculations for a storm sewer system. That SDB, a DGN, and some support files are attached in a zip file for review. When…
    • Area-G.zip

  • Re: InRoads - ProjectWise

    Mike, In InRoads Group V8i (V08.11.05), the ProjectWise Open and Save As dialogs do remember the last folder in which a file was opened\saved within the same session. In InRoads XM Edition, the closest thing that I can recommend is Project Defaults…

  • surface design

    i have an existing surface (dtm) and i am putting in a proposed concrete pad at a certain elevation. i want the pad to tie into the existing ground at 2 to 1 how do i generate a new proposed surface showing the 2 to 1 slope .
Communities
Support and Services
Training and Learning
Social Media