• Design Cross Slope report values is not matching.

    I am trying to generate cross slope report @ 10 m interval by station base or station offset report but i am not getting appropriate values of cross slope in report. It seems correctly in cross-section view. Am missing something ?? Images is ready for…

  • Exporting points from InRoads to Civil 3d

    Good day all, We are having to import a topo survey we processed/cleaned up in InRoads into Civil3d per client request. We took the data from the .fwd and exported as a text file, saved as a .csv so that the points can be imported into Civil 3d. What…

  • Cross Section Annotation - Minimum Elevation Difference

    I am using Power InRoads V8i (SelectSeries 2). Is there a toggle in the cross-section annotation that would stop both elevations being displayed if they are within 0.01' of each other? The way I have my template set up, is I have a 'ditch check' point…

  • InRoads Horizontal Regression not able to produce regression points from Horz Alignment?

    Good Morning, I cannot create Horizontal Regression Points from my horizontal alignment, what are the steps in getting regression points from a horizontal alignment? I have the following horizontal alignment EX RoadwayCL And I created another…

  • InRoad XML report CrossSectionPoint element with an Attribute of "ExistingCenterline"?

    Hello, Does anyone know what makes an Evaluation Report produce a RAW xml file have a node "CrossSectionPoint" with a "Type" attribute equal "ExistingCenterline"? Obviously it is picking up the points that makeup the template at the template drops of…

  • The Tasks List in the Task Window Dialog Box is Empty

    It seems fine at the physical computer (I was using it earlier today), but when I use Bentley InRoads Suite SS4 (MicroStation SS4) through a remote connection, the top of the Tasks dialog box is bigger yet empty, not allowing me to change tasks with a…

  • InRoads Horz. Annotation of Cardinal Points

    Good Morning, See attached illustration (orange circled area). How can we place the "PC" text on the same line as the Station Text, or is it not possible? Thank you for your time,

  • No Feature Syle when Importing Surface

    I'm a student using InRoads V8i SS10. This is my first time using, and I have limited access to my professor due to COVID-19 protocol. We've been given the 3-D elements necessary to create a surface. I am attempting to do so by InRoads File --> Import…

  • Vertical alignment curves [InRoads]

    I am trying to design an underground utility pipe using InRoads. I drew out the horizontal and vertical alignments. Part of our design requires taking any vertical turn less than 8 degrees and turning it into a curve with a radius of 360'. I have to do…

  • End Area Volume - Classifications

    I am running InRoads SS4. I am trying to calculate cut but only in a certain part of the road. I have changed my template so I can ignore the components I need to in order to get that certain section. My issue is the following: there is a column in the…

  • InRoads Bridge Geometry - Create Girders

    I would like to use the InRoads Bridge Geometry tools to quickly layout girders on a tightly curved bridge. This would be a very useful tool if I could get it to work. Instead of manually drawing girder lines and checking max/min deck overhang, max/min…

  • Plan and Profile Generator / Create Profile inconsistently annotating event points for given station ranges

    Power InRoads V8i (SELECTseries 4) Version 08.11.09.904 I am having issues with event points (seemingly) randomly not being annotated on my profiles through 'view vertical annotation'. I created a set of profiles using plan and profile generator…

  • end conditions going wrong direction

    I have the cut and fill set to project to surface to the right on the right side of the assembly and a second constraint to be 3:1 grade. The issue is evident by looking at the picture but I don't know what is occurring within the template

  • Can't save the SS2 Roadway Design Ird File

    Hi, I was working on addressing the model with Inroads SS2, I updated the Roadway Design IRD file, but can't save it if I choose to Process All/ Process Visible Range. Please see the snapshot below. I try to reduce the file size to cut the road distance…

  • 3D Stationing

    Hello everyone, I will design an alignment for an oil pipeline. And the project requires 3D stationing. I found the 3D alignment task but is there a way to annotate in 3D? I am using InRoads V8i SS2. Thanks in advance.

  • Creating a Centerline Alignment Between Two Horizontal Alignments

    Product(s): InRoads Version(s): 08.11.07+ Area: Geometry Design This workflow will demonstrate how to create a “best fit” centerline alignment between two edge of pavement horizontal alignments. For this example, there are…

  • Importing Pay Items

    Applies To Product(s): InRoads Version(s): V08.11+ Environment: N/A Area: N/A Subarea: N/A Original Author: Bentley Technical…

  • Displaying Components in Cross Section Sets

    Product(s): InRoads Version(s): 08.11.07+ Area: Cross Sections Original Author: Jacquelyn Pettus, Bentley Technical Support Group To display components in existing cross sections, you should use the Evaluation>Cross…

  • Survey: Delete Temporary Survey Graphics

    Problem: When opening a design file in Microstation alone, temporary survey graphics that have been previously displayed remain in the file. or When opening a design file with InRoads and MicroStation, graphics are visible until a MicroStation command…

  • Problems Annotating Cross Sections

    Product(s): InRoads Version(s): 08.11.07+ Area: Cross Sections Original Author: Bentley Technical Support Group When running the Annotate Cross Section command, first verify the objects (components and/or crossing features…

  • XIN Manager ?

    Re: XIN Manager ? by caddcop I have found that it is possible to create reports on many of the feature settings for the XML XIN reports and with those, develop a plan of attack for edits. The results can be very similar to the CSV export. Sadly, you…

  • Inroads triangulation error far from model

    Has anyone ever received a triangulation error with point coordinates that are far beyond the model limits? In my case the point where Inroads identifies untriangulatable data is 1200 feet away from my model. I thought it might be an incompatibility…

  • InRoads V8i (SS1) Save As Options

    We'll be installing InRoads V8i (SS1) and AutoCAD 2010 next month, but will continue using InRoads XM with MicroStation XM for a few more months. How can we set the Save As options in V8i to always default to version 8.7-8.9 Compatible? I'm hoping there…

  • InRoads V8i Auto Save

    Anonymous
    Anonymous
    Please tell me there is an autosave feature in InRoads V8i. I am so used to MicroStation autosaving every 60 seconds I sometimes forget to save my work often enough in InRoads. Thanks. Michael Greene

  • Re: View Stationing

    Ólafur, A similar problem has been fixed in the upcoming release of InRoads Group V8i (SELECTseries 1). I apologize for any inconvenience. Thanks, Jason Smithey
Communities
Support and Services
Training and Learning
Social Media