• End Condition Exception Not Following Horizontal Feature Constraint

    I am trying to apply an end condition exception to a template that has a right outside edge of pavement that is controlled by a horizontal feature constraint so the outside edge of pavement is able to vary (for example, at a turn lane taper transition…

  • Residual Cut/Fill Lines

    I have some cut and fill lines that have appeared in my corridor model. I am unable to delete this line and it remains after deleting my template drops in the area. The first photo shows the area with my corridor and template still there. The photo…

  • How can I process multiple corridors or all corridors in one file?

    Answer: In the Project Explorer, navigate to the OpenRoads Model tab, then right-click on the filename and select "Process All Objects" from the context menu. Keyin = GEOMETRY PROCESSALLOBJECTS

  • Discrepancies converting existing ground TIN to DTM for use in Roadway Designer

    I noticed an issue with end conditions not tying into the existing ground line drawn in cross section cells. The problem occurred at several cross section and the error varied between 0.01' to upwards of 2'. After troubleshooting, it was noticed that…

  • What is the Corridor Baseline?

    Product(s): InRoads, MX, GEOPAK Version(s): 08.11.09+ Area: Corridor Modeling Original Author: Sanders Thomas, Bentley Technical Support Group Question: When I want to create corridor, I receive a prompt to locate…
Communities
Support and Services
Training and Learning
Social Media