I'm having an issue with my templates. I have a null point to create an auxilary lane where there are the corresponding corridor references. None of the components in the Aux lane null point are used in the regular mainline and I have display rules to…

I have a null point that displays a curb in my template with a horizontal feature constraint to that searches for the selected feature definition. I created a horizontal feature from a series of regular microstation lines chained together using microstation…

Wrap up 2018 in the know and working optimally with the OpenRoads for SEAPac Special Interest Group virtual workshop on Wednesday, December 5, 2018 at 11 a.m. AEDT. Register today ! Structured for users in the Southeast Asia and Pacific regions, this…

I cannot get my Corridor Objects Toolbox to open. It was working a few days ago, but now I cannot get it to pop up. I have tried it in several different corridor model dgns. It is all the same result. I will click on the tool and then select the corridor…

Make plans to attend the next OpenRoads for SEAPac Special Interest Group virtual workshop on Wednesday, October 3, 2018 at 11 a.m. AEST. We will cover topics important to you and the work you do. Register today ! Structured for users in the Southeast…

Stay informed, engaged, and working optimally with the OpenRoads for SEAPac Special Interest Group! I hope you’ll join me for the next virtual workshop on Wednesday, August 1, 2018 at 11 a.m. AEST. Register today ! Structured for users in the Southeast…

Mark your calendar and invite your colleagues to the next OpenRoads Special Interest Group virtual workshop, Moving to OpenRoads Designer – Corridor Modeling , on Wednesday, July 11, 2018. Complimentary one-hour sessions are set for 9 a.m. EDT and 5 p…

Join Bentley's Joey LouAllen for the next OpenRoads Special Interest Group (SIG) virtual workshop, Moving to OpenRoads Designer – Terrain Modeling , on Wednesday, February 14, 2018. Sessions are set for 9 a.m. EST or 5 p.m. EST and share the same agenda…

I noticed an issue with end conditions not tying into the existing ground line drawn in cross section cells. The problem occurred at several cross section and the error varied between 0.01' to upwards of 2'. After troubleshooting, it was noticed that…

When creating horizontal or vertical civil geometry we should have a toggle that will retain or not retain the "design intent". Having to go back and remove constraints and "re-civilize" elements is just a lot of extra clicks. Further design intent, and…