• End Condition Exception Not Following Horizontal Feature Constraint

    I am trying to apply an end condition exception to a template that has a right outside edge of pavement that is controlled by a horizontal feature constraint so the outside edge of pavement is able to vary (for example, at a turn lane taper transition…

  • Rollover lock- Highside Shoulder

    Hello, I am trying to set a shoulder rollover lock for the shoulder on the highside of a superelevated section. The lane transitions from NC @ 2% to Full super at 5%. I want the slope on the left be 3% when the lane reaches full super. I have tried…

  • How to move elements placed in 2D to the terrain model

    I am modeling 3D elements which were previously placed based in their corresponding X Y coordinates at elevation 0. Now that we have the terrain model I need to raise all of these elements to their corresponding elevation defined by the new terrain. Is…

  • Horizontal Feature Constraint stops part way along the feature

    I have a null point that displays a curb in my template with a horizontal feature constraint to that searches for the selected feature definition. I created a horizontal feature from a series of regular microstation lines chained together using microstation…

  • SIG Workshop: OpenRoads Subsurface Utilities Design and Analysis - July 31, 2019 - You're Invited!

    OpenRoads Subsurface Utilities Design and Analysis: Rural Drainage Design for Modeling and Analysis of Ditches and Culverts Host: Jeff Martin, Senior Content Engineer, Bentley Systems, Inc. 31 July 2019 - 10 AM EDT Register Now Mark your calendar…

  • SIG Virtual Workshop: OpenRoads Subsurface Utilities Design and Analysis – May 29, 2019

    OpenRoads Subsurface Utilities Design and Analysis SIG: Subsurface Utility Design and Modeling Tools in OpenRoads Designer Host: Beebe Ray Technical Support Engineer Bentley Systems, Inc. 29 May 2019 - 10:00 A.M. EDT Register Now Get a head…

  • SIG Virtual Workshop: OpenRoads – May 8, 2019 – You're Invited!

    OpenRoads Special Interest Group: Modeling Techniques in OpenRoads Designer: Ramps and Gores Host: Joey LouAllen; Guest Presenter: Scott Urbas May 8, 2019 - 9:00 AM EDT & 5:00 PM EDT Register Now The OpenRoads Special Interest Group meets…

  • The Reverse Engineering Stops Here?

    I used to have this in my email signature: gnireenignE As a developer of training, it was my duty – my calling – to save software users from having to reverse engineer how the software worked. Reverse engineering is hard, it’s really time-consuming…

  • ​SIG Workshop: OpenRoads for SEAPac – Dec. 5, 2018 – You're Invited!

    Wrap up 2018 in the know and working optimally with the OpenRoads for SEAPac Special Interest Group virtual workshop on Wednesday, December 5, 2018 at 11 a.m. AEDT. Register today ! Structured for users in the Southeast Asia and Pacific regions, this…

  • SIG Virtual Workshop: OpenRoads for SEAPac – October 3, 2018 – You're Invited!

    Make plans to attend the next OpenRoads for SEAPac Special Interest Group virtual workshop on Wednesday, October 3, 2018 at 11 a.m. AEST. We will cover topics important to you and the work you do. Register today ! Structured for users in the Southeast…

  • SIG Virtual Workshop: OpenRoads for SEAPac – August 1, 2018 – You're Invited!

    Stay informed, engaged, and working optimally with the OpenRoads for SEAPac Special Interest Group! I hope you’ll join me for the next virtual workshop on Wednesday, August 1, 2018 at 11 a.m. AEST. Register today ! Structured for users in the Southeast…

  • SIG Virtual Workshop: OpenRoads - July 11, 2018 - You're Invited!

    Mark your calendar and invite your colleagues to the next OpenRoads Special Interest Group virtual workshop, Moving to OpenRoads Designer – Corridor Modeling , on Wednesday, July 11, 2018. Complimentary one-hour sessions are set for 9 a.m. EDT and 5 p…

  • SIG Virtual Workshop: OpenRoads - February 14, 2018 - You're Invited!

    Join Bentley's Joey LouAllen for the next OpenRoads Special Interest Group (SIG) virtual workshop, Moving to OpenRoads Designer – Terrain Modeling , on Wednesday, February 14, 2018. Sessions are set for 9 a.m. EST or 5 p.m. EST and share the same agenda…

  • End Condition Targeting a Feature Definition Both Horizontal and Vertical

    I have a template that has an end condition on the left and the right. This particular end condition targets a specific feature definition both horizontally and vertically. The issue is that if I have a targeted feature on only one side of the road, both…

  • Joey LouAllen Teaches Roadway Modeling Techniques & Tools at LEARNing Conference

    On Tuesday at the Road and Site LEARNing Conference, Joey LouAllen led the “Approach and Driveway Modeling” workshop where he showed OpenRoads concepts that can be applied when modeling intersecting approaches, secondary roads, and driveways. Among the…

  • Superelevation Graphical editing of control lines

    When are we going to be able to graphically edit the superelevation control lines in Openroads? This needs to be resolved. Terry

  • Featured LEARNing: Bentley's Virtual Classroom, January 26-31, 2015

    Did you know Bentley offers live training in a virtual classroom setting to complement its on-demand video lectures? You'll work with practical, hands-on exercises and real-world datasets all delivered by Bentley experts. In the blended learning classroom…

  • Civil Geometry - Design Intent

    When creating horizontal or vertical civil geometry we should have a toggle that will retain or not retain the "design intent". Having to go back and remove constraints and "re-civilize" elements is just a lot of extra clicks. Further design intent, and…
Communities
Support and Services
Training and Learning
Social Media