I am designing a storm sewer system with a 12x12 box down the middle of a road and curb inlets connected via 24" laterals. I need the link summary data for the lateral pipes for plan production, but ORD/DU doesn't seem to compute this data when created…

I've just started to analyze hydrology data in OpenRoads Designer, and I'm wondering if there is a way to compute a composite runoff coefficient in a catchment I drew by hand rather than one auto-delineated by an inlet node. I know this is relatively…

When trying to insert a bend on the pipe, I noticed that in the new version of the ORD 2022_2 we do not have this option to choose from when clicking on a pipe: In 2021 there was: I know I can alternative press "ctrl" and insert a bend, but…

Is there a way to update profile runs created from the "Hydraulic Run from Node"? I am modeling a Drainage pipe network and several catch basin locations have been moved slightly in plan and have different inverts. I already had these profile runs on…

I have roughly 800 points with northing, easting, elevation, depth below grade, stationing, and offset from my alignment information. The depth below grade varies from point to point otherwise the solution would be quite simple. There are roughly 8-10…

I know that we can do this while using the command "Extract from Graphics", but, is there a way to reset the cover depth once after creation of the conduit.

Our organization is just starting to use the ORD Drainage & Utilities package for storm sewer design. We have laid out a storm sewer system and performed an analysis on the system using the software. We also used calculations in our organization's design…

I am using Uk standards Library for designing Stormwater drains. How do I add a new Feature definition/ Cell Library which is not in the Cell Library for a new Chamber (image attached for reference) in ORD. I tried using the Add New Template option and…

Is there a Node limit when using ORD Drainage & Utilities... by itself. What I mean is in order to model a larger site/corridor, with over 100 drainage nodes, can this be done just using ORD Drainage and Utilities? Or do we have to use one of the other…

Does anyone know where do change the settings related to where the catchments see the grate location and dimensions? This is in OpenRoads Designer 2022 R1. In the example below I have a combination intake. The magenta catchment is linked to the intake…

Good morning. One of our team members is getting errors when trying to change the invert elevation for a drainage inlet. They were trying to type the changes in the properties area. When she tries to do this, she gets the below error messages and the…

Hello everyone, This is my first time making drainage profiles in OpenRoads Designer from a model that is imported from Civilstorm. My team and I seem to be experiencing quite a few issues with them and I'm wondering if anyone else has encountered glitches…

Hi, I'm trying to update a storm drain invert in a SUDA model and it won't allow me to and is crashing. It is giving me a "System.NullReferenceException" I am trying to update it in the utility properties as I don't want it tied to the invert of the…

We are putting together an existing model for an urban drainage system in OpenRoads Designer. When validating the system, OpenRoads seems to add mystery/phantom catch basins to the User Notifications list that can't be found anywhere else in the model…

Im having issue figuring out how to tie drainage structures to a corridor feature so that it updates with the corridor. i've tried placing them using civil accu draw and selecting the feature as the baseline and setting the centerline as the base line…

When I try to run my base analysis scenario, I get the following error message: 44008 "Base Analysis" "Catchment" "338" "1" (N/A) "The catchment is active but there is no outflow element specified, or the element is invalid or deleted. " Hydraulic…

Hello, Is there easy way to compute the excavation volume of a D&U headwall? In NH the excavation is computed 1' outside the foot print of the headwall and 1' below up to the existing ground. The Process I am using is to trace the 3D head wall in…

Hi Folks. using Open Roads 10.10 I am having an error when trying to use the Extract From Graphic Tool with utilities. I already have a surface and am attempting to extract utilities from a 2D line I drew in. When doing that I am getting the error…