• Modify Horizontal Start Station but Maintain Vertical Stationing

    Is there a way to modify my horizontal start station but maintain the vertical stations? I had to tweak the starting station by a small fraction, but as a result, all my VPI's are now carrying that small decimal fraction. I had gone through the effort…

  • Limitations in Assigning Station Equation between BRT SS2 and SS10

    Hello BRT users, BRT SS2 allows us to create a station equation with the same prefix multiple times. For example, A 1000.000 and A 2000 and so on. But SS10 doesn't allow the creation of a station equation with the same prefix. It gives an error…

  • How to get the Station Region Information to show on the Horizontal Reports.

    Product(s): OpenRoads Designer Version(s): 10.0+ Area: Reports Go to File > Settings > File > Design File Settings > Civil Formatting Under Station Settings, set the Equation to By Index. Afterwards, add a station equation…

  • How do I get ORD to recognize a prefix on a station equation?

    How do I get ORD to recognize a prefix on a station equation? your examples suggest that it should work, but I'm not seeing it. If I include a prefix it ignores both the prefix and the requested ahead station, and sets the ahead station to zero. Analyze…

  • Video: How to add Multiple Station Equations in an Alignment

    Product(s): OpenRoads Designer Version(s): 10.00.00+ Area: Geometry Original Author: Sanders Thomas, Bentley Technical Support Group This video demonstrates how to add multiple station equations in an alignment. Click…

  • Station Equation in MXROAD

    Hi, I am trying to find station equation tool in mxroad (Not openroads tools). Can anyone please from where can i access that tool ? Working on MXROAD SS4 08.11.09.879 Thanks

  • Add Station Equation command

    Product(s): OpenRoads Designer Version(s): 10.00.00.120+ Area: Geometry Original Author: Holly Herring, Bentley Technical Support Group This wiki explains the Add Station Equation tool. The "Add Station Equation"…

  • Geopak Geotechnical - Visualizing Boreholes in Profile View with Station Equations

    Should the borehole navigator recognize the station equations within the existing profile cell automatically? I have entered the correct chain, geopak regions, and the borings are being displayed at the correct elevations. However, after the first station…

  • Issues with cross sections from corridor DTM vs tin

    I'm working on a project that features a station equation and have created a corridor for it. When I cut cross sections everything runs great up until the station equation. After the equation my proposed cross sections cut from the DTM my corridor…

  • Station Equation Command on a Curve

    Applies To Product(s): Bentley GEOPAK Civil Engineering Suite, PowerGEOPAK Version(s): 08.11.09.674 Environment: N/A Area: Coordinate Geometry Subarea: Create Station Equation on…

  • Profile - Station Equation

    Team - I have a completed project. I have to add a station equation to my base centerline to acomplish an alignment change (long story). Now I have to incorporate that station equation into my profile(s). However, when I try to load the original…

  • Re: Profile - Station Equation

    Team - I think I figured out how to fiddle with the restation tool <begin station> setting to get all the VPIs after the station equation to line up. I only had to reprofile the first quarter mile and not the last 3.8 miles of the project. I also…

  • Geopak Road COGO - How to add Station Equation/Region where Back Sta = Ahead Sta

    Anonymous
    Anonymous
    Hello, Ok, I know my subject sounds like a stupid question--why would one add a station equation if the ahead station is equal to the back station? The short answer: to (possibly) cut down on work later. Can one add a station equation to an alignment…

  • Re: Profile - Station Equation

    Derricke - Thanks for the input. I tried the Restation Profile command. It seemed to work because I could now load my profiles into the Vertical Alignment tool. However, the restationing tool moved every VPI station located after the equation…
Communities
Support and Services
Training and Learning
Social Media