• I am working on Open Roads SignCAD and I can't seem to find a manual?

    Does anyone have further information on how to use SignCAD? There are only a few tutorials.

  • SIG Workshop: OpenRoads Subsurface Utilities Design and Analysis - July 31, 2019 - You're Invited!

    OpenRoads Subsurface Utilities Design and Analysis: Rural Drainage Design for Modeling and Analysis of Ditches and Culverts Host: Jeff Martin, Senior Content Engineer, Bentley Systems, Inc. 31 July 2019 - 10 AM EDT Register Now Mark your calendar…

  • OpenRoads Terrain model TRUE offset

    Hello, It would be very beneficial when designing channels(lining channels with riprap etc.) or in a similar fashion milling/ overlaying a roadway to be able to make a TRUE offset of that surface. I understand there are templates to do milling and overlay…

  • SIG Virtual Workshop: OpenRoads – May 8, 2019 – You're Invited!

    OpenRoads Special Interest Group: Modeling Techniques in OpenRoads Designer: Ramps and Gores Host: Joey LouAllen; Guest Presenter: Scott Urbas May 8, 2019 - 9:00 AM EDT & 5:00 PM EDT Register Now The OpenRoads Special Interest Group meets…

  • SIG Virtual Workshop: OpenRoads Subsurface Utilities Design and Analysis - March 26, 2019 - You're Invited!

    OpenRoads Special Interest Group - Subsurface Utilities Design and Analysis Topic: What's New in Subsurface Utility Design and Analysis March 26, 2019 - 10 a.m. EDT (U.S. Host: Joey LouAllen; Presenter: Jonathan Smith Register Now …

  • MX road

    Dear all Do we have the tool in mx with which we can assign ground levels to our alignment string ??

  • Designing templates with PGL

    I am trying to figure out how to design my templates around my PGL. Before, Iassumed my PGL was always 0.5' below the median, and I showed all grass medians as being 2% crowned. I know this is incorrect, because the PGL location varies throughout the…

  • ​SIG Workshop: OpenRoads for SEAPac – Dec. 5, 2018 – You're Invited!

    Wrap up 2018 in the know and working optimally with the OpenRoads for SEAPac Special Interest Group virtual workshop on Wednesday, December 5, 2018 at 11 a.m. AEDT. Register today ! Structured for users in the Southeast Asia and Pacific regions, this…

  • SIG Virtual Workshop: OpenRoads for SEAPac – September 5, 2018 – You're Invited!

    If you have questions on how to use OpenRoads Designer in a production environment, then don’t miss the next OpenRoads for SEAPac Special Interest Group virtual workshop on Wednesday, September 5, 2018 at 11 a.m. AEST. Register today ! Structured for…

  • Mx Compound Arc between 2 Strings produces erratic results

    Mx v8i ss2. Dear colleagues, Dutch design rules usually don't request compound arcs in intersections, so this is a first for me. And an unsuccesfull one, as I get erratic results. So I tried one with minimal interference: empty model, two two-point…

  • When designing a Single Arc between 2 Strings, levels are usually correctly calculated inbetween. Sometimes they are not. How come?

    When designing an offramp according to NL design standards, 145 options are used to widen the lane and make a fluent transition between the ongoing lanes and the exit lane: design,edit gapingen 145,b8a2,b8c0,mp30,4= 1800.000,5= 1.000,7= 1800.000,10…

  • SIG Virtual Workshop: OpenRoads - August 8, 2018 - You're Invited!

    Plan production is the hot topic for the next OpenRoads Special Interest Group virtual workshop on Wednesday, August 8, 2018. Complimentary, one-hour sessions on Moving to OpenRoads Designer – Plan Production , share the same agenda and are set for 9…

  • SIG Virtual Workshop: OpenRoads for SEAPac – August 1, 2018 – You're Invited!

    Stay informed, engaged, and working optimally with the OpenRoads for SEAPac Special Interest Group! I hope you’ll join me for the next virtual workshop on Wednesday, August 1, 2018 at 11 a.m. AEST. Register today ! Structured for users in the Southeast…

  • SIG Virtual Workshop: OpenRoads - July 11, 2018 - You're Invited!

    Make plans to attend the next OpenRoads Special Interest Group virtual workshop, Moving to OpenRoads Designer – Corridor Modeling , on Wednesday, July 11, 2018. Complimentary one-hour sessions are set for 9 a.m. EDT and 5 p.m. EDT and share the same agenda…

  • SIG Virtual Workshop: OpenRoads for SEAPac - July 4, 2018 - You're Invited!

    Mark your calendar and invite your colleagues to the next OpenRoads for SEAPac Special Interest Group virtual workshop on Wednesday, July 4, 2018 at 11 a.m. AEST. Register today ! Structured for users in the Southeast Asia and Pacific regions, this…

  • SIG Virtual Workshop: OpenRoads - June 13, 2018 - You're Invited!

    Join the OpenRoads Special Interest Group team on Wednesday, June 13, 2018 for Practical Design and Modeling for Intersections: Part 2 . Complimentary one-hour sessions are set for 9 a.m. EDT and 5 p.m. EDT and share the same agenda. Register now ! …

  • circular junction

    how to create circular junction in mx road

  • Integration with Interactive Highway Safety Design Model (IHSDM)

    Please consider integrating OpenRoads with the IHSDM software suite. Safety analysis tools and software continue to become more important in the highway engineering world as research on how our designs affect highway safety continues to strengthen. There…

  • Insert PI command will not track to cursor

    Product(s): InRoads Version(s): 08.11.09+ Area: Horizontal Geometry Original Author: Chris Key, Bentley Technical Support Group Question: After creating an alignment using the Add PI command to inset to POB and POE…

  • Best software for OpenRoads Design Review & Analysis

    Hi all, We are currently designing our first project in OpenRoads and are looking for Bentley PC software that can be used by design reviewers to interrogate and review our designs. I've noticed that there are a few "viewers" and "navigator" products…

  • User Spotlight: Kathy Pendergast

    "This project [Metro Light Rail] combined a bunch of drafters from several different offices, which gave us a chance to learn from others and expand our knowledge of all programs." Name: Kathy Pendergast Job Title: Senior Engineering Tech Organization…

  • Design Options

    .

  • Re: AccuDraw and AccuSnap interfering with some commands

    Larry, Please file a report of the problem through the following mechanism: http://appsnet.bentley.com/srmanager/addcall.aspx Thanks, Jason Smithey

  • Re: InRoads - Storm Water

    The Storm & Sanitary Design Procedures are also included in the help file delivered with the software under Supplemental Information> Storm & Sanitary. You can order copies of the documents prior to InRoads Group V8i from http://docs.bentley.com…
Communities
Support and Services
Training and Learning
Social Media