• Help, I Cant Open DGNs from Projectwise Error [222]

    I keep getting the below error when trying to open DGN Drawings from Projectwise but ONLY for drawings that i have created within Projectwise . If another user has made the DGN or I have created it offline and uploaded it i do not get the error. The…

  • Unable to Create Regression Points

    Hello, I am using Microstation v8i SS2 and Bentley Rail Track v8i SS2 for a project that requires a regression analysis. I have a 3D survey file containing points with northing/easting and elevation data. I connected the midpoints between the survey…

  • Getting Runtime error while doing the Horizontal in Quick alignemt method

    Dear All, Iam Getting Run time error when i try to do Horizontal alignment in Quick aligment menthod as shown in attached image. Please suggest me the solution Thanks in Advance Hari Krishna Palla

  • Geopak Drainage Error Computing output for a network with Pipe-Arch

    I am trying to design a storm drain network in an area with limited cover. When I try to use the "Pipe-Arch" option, Geopak reports an error. The same network runs just fine when using circular pipe or box culvert or elliptical pipe. I checked the drainage…

  • Project Managed Workspace error starting InRoads or GEOPAK in ProjectWise CONNECT V10.00.02.265

    Product(s): InRoads/GEOPAK Version(s): 08.11.09.878 Area: ProjectWise Question: When launching InRoads or GEOPAK in ProjectWise V10.00.02.265 using a managed workspace, user gets the error "Last Error [222] Cannot start application…

  • OpenRoads ConceptStation .ird file fails to export

    Hi everybody I am desperately trying to export out my ConceptStation file to OpenRoads Designer to work on it further and with more tools. I followed the instructions on the wiki on exporting but I get an "export failed" error on just the .ird template…

  • RE: Error - Reading ALL file

    Nico - I have a solution. Not sure if this is the cause of the error however I no longer am receiving the error. The file I have been importing is lacking a backsight line in the FBK file. See the captures to better explain.

  • Error - Reading ALL file

    I'm receiving the following error when importing FBK files.Any ideas?

  • Video: Reason and solution for element not valid for Tool error & Create Civil Rule Feature

    Applies To Product(s): Open Roads Technology Version(s): 08.11.09+ Environment: N/A Area: Open Roads Technology Subarea: Create Civil Rule Feature Original Author: …

  • OpenRoads Out of Memory Crashes

    Hi all, We are having problems with OpenRoads in MX SS4 running out of memory after repeated processing of large corridors. It seems that OpenRoads doesn't release all its memory usage on every corridor processing run so eventually we get to approx…

  • import alignment with a shift

    The latest issue I am having with OpenRoads stems from the way it is importing alignment information from a gpk. I am trying to import an alignment that has a "shift" which is a traditional geopak cogo command which acts like a station equation, but intentionally…

  • [V8i] Fatal Error. Could not create a .ma file ... crash issue multiple times per day (Print Organizer Crash, View Attributes Crash)

    MicroStation v8i (SELECT Series 2) - Version 08.11.07.443 Bentley GEOPAK V8i (SELECT Series 2) 07.11.07.619 Windows 7 Professional x86 Services Pack 1 Intel Xeon CPU E5-1620 0 @ 3.60 GHz 32.0 GB RAM Approximately, 4-5 times per day the program…

  • InRoads ss3 - Template Creation Error

    When I attempt to create a new corridor template I receive an error message. The Error occurs after attempting to save the new template. Has anyone ran into this issue in the past? Or have any clue how to solve this error?

  • Discrepancies converting existing ground TIN to DTM for use in Roadway Designer

    I noticed an issue with end conditions not tying into the existing ground line drawn in cross section cells. The problem occurred at several cross section and the error varied between 0.01' to upwards of 2'. After troubleshooting, it was noticed that…

  • Sakthi

    hi I have while creating alignment in using Google earth integrated tria model. the error is i have negative coordinate in y value so it can't accept that negative value. I don't know why? Please help me...........

  • MXRoad Error - E0094 Incompatible Sub-Reference

    Applies To Product(s): Bentley MXROAD Version(s): N/A Environment: N/A Area: Display Subarea: N/A Original Author: Jason Walsh, Bentley Technical Support Group …

  • GEOPAK Road Tools Earthworks Error

    I am working on creating mass diagrams for a large earth moving project. I have earthwork running to include separate approaches and connections by using the add/subtract options within earthwork. There is a multi factor used on all earthened fill. I…

  • Installing Geopak SS3 using SCCM 2012 issue

    I hope this is correct location to post this question, if not please let me know. I am seeing an issue running Geopak SS3 08.11.09.493 after installing the program using SCCM 2012 (Microsoft's System Center Configuration Manager). For those of you…

  • MX - problem with pavement (and cross sections) design

    Hi all, I recently was designing pavement for my project. Almost everything went smooth but as always there are some major/minor issues: PROBLEM 1) I have two triangulated terrains...one is simple (TX00) and another one is more detailed and sub-divided…

  • Pavement and subgrade design...annoying error

    Hi everybody, I was going to design pavement for my project and after creating Layers and saving them some strange error saying smth about not being able to save file popped and since then whenever I click "Pavement Layer Design" in "Pavement and…

  • Microstation Earthworks Rounding Error and Reading Error with Log Files

    I am working on creating mass diagrams for a large earth moving project. I have earthwork running to include separate approaches and connections by using the add/subtract options within earthwork. There is a multi factor used on all earthened fill. I…

  • Error when importing alignment from graphics

    (Posted on behalf of Be Communities member) InRoads V08.11.07.566 I am having a problem using the command File > Import > Geometry > From Graphics to import a horizontal alignment. The first curve imports as a series of short segments rather than…

  • Error Box in Microstation/Inroads

    Hello, I am running Microstation V8i version 08.11.07.443 with Inroads suite version 08.11.07.423. I have been getting this crash in microstation very often, Could anyone tell me what is going on here. The crash happens when I exchange or open another…

  • Geopak label updater - hit and miss success

    Hi all, using Geopak in MS v8i 08.11.07.443 I've placed labels using Plan View Labeler and now my grading changed. So I go back to Labeler and choose Tools>Label Updater. Choose my labels to be updated, choose Select by: Selection Set, click Start…

  • VBA:Lookup error codes for inRoads, where to

    Hi all, Been playing with inRoads alot lately. It says in the manual that most functions return only THREE different values, success = 0, errors = Whatever , or no valid license = -1 . I cannot find anywhere to translate the errors , so I have to…
Communities
Support and Services
Training and Learning
Social Media