hi, I have a conc. barrier in my master temple. A barrier hinge feature def. is being used on both the top (BH1-L and BH1-R) and bottom hinge points (BH-L and BH-R) , however in the 2D plan its only showing the top hinge. (BH1-L and BH1-R). Again the…

I am trying to apply an end condition exception to a template that has a right outside edge of pavement that is controlled by a horizontal feature constraint so the outside edge of pavement is able to vary (for example, at a turn lane taper transition…

Hi I have a template with pavement layers extended to End Conditions. I have applied end condition (Override) and removed "check for interception" from fill component. The constraints of the marked points are getting removed in the end condition exception…

Hi, I have a corridor which has a berm and end condition arises from the berm. I had made the end conditions as child component of the Berm. When I apply end condition exception, the end conditions do not respect the parent child relationship. The end…

I am using Uk standards Library for designing Stormwater drains. How do I add a new Feature definition/ Cell Library which is not in the Cell Library for a new Chamber (image attached for reference) in ORD. I tried using the Add New Template option and…

Hi all, I have a corridor of 4 Lane divided carriageway and I need to create a lane slopes report @ 10m interval. I ran the station base report . The camber/Lane slope in reports is calculating from centerline "CL" to carriageway edge "EOP" which is…

Anyone know what would cause this component to become unattached? The template doesn't show this, but when generating dynamic sections as well as actual sections it is just floating there.

I am trying to grab the EOP line from my corridor model to use as an intersection point for the driveway CL I am drawing (red line). When I try to grab the EOP line, I get an "Invalid Geometry Type" error. But there the CURB_FACE_TOP_L line is right next…

I kind of have a multiple questions regarding Template drops and libraries 1. When synchronizing the template library to the corridor I get the error Even though it is definitely in there. Then within in the Corridor Objects Template Drops…

Is there an easier way to remove a template point from a component than to completely redraw the component?

I'm attempting to create an intuitive template that seeks the existing terrain model but also interacts with a horizontal geometry, in this instance a Right of Way, so that the corridor will use a different end condition based on the distance of the horizontal…

Good morning / evening / afternoon all, I was wondering if there was a way to have a template target a surface twice when creating a component. I have a project where we're filling in part of a ditch between two embankments, but there's a…

I make retaining wall by basic template file.(this template exactly active what i want. but dont know how to make[need to edit but can't understand]) i make like this, but need to split by yellow line. I try to make retaianing wall template…

hello all! i try to make transition between two template. but when i edit transition can't make surface I think dot&dash line makes a surface, but when I make template always fail. How can i fix this problem?? transition test.dgn…

Hi. I'm unable to find a topic on following issue, which seems to be quite easy, but...I'm designing in OpenRoads and in template there is a simple gravel layer - 20 cm high with rooftop type crosslopes - 4% each. As I create the superelevation, for…

Currently I am working in ORD 10.09.00.91, and we have a large project that was created in SS2 with GEOPAK. The project is still being revised but the client wants a 3D model. I built one in SS4 previously and point controls worked with the design line…

I'm using Power Geopak V8i SS10. Very new user. I am attempting to model depressed approaches into my design and need some help. I've attached screenshots to aid. I attempted to create a civil cell of the approach (a simple approach at that) and I…

Hello all. Working in ORD Connect. I am working on a divided hwy with two PGLs, each with their own template drop. My typical section has 6:1 tie towns from both sides in the median forming a ditch. How do I get these 6:1 tie downs to target each other…

Hi I'm using Power Geopak V8i SS10. Very new user. I am working on modeling an intersection. I have laid out a pavement/wearing surface with edge of pavement lines. I applied my curb & gutter/sidewalk/tie as a linear template to EOP lines. When adjusting…

I have a corridor template that has both variable fill sections and variable cut sections. The fill works just fine, but the cut does not work fully. When I test the template, it appears to be working, but does not fully display on the cross section explorer…

How do you create an overlay template for a divided highway with a single centerline in Openroads Designer?

I noticed in ORD that you can now use arcs in templates (perhaps I missed it in earlier versions). How are the arc parameters set? Can they be set at the time of placement, and and can they be edited after. I'm trying to inset a fillet in a component…

Attached are a 4 Lane divided carriageway (with Depressed Median) Template from Indian Template set. Referring the attached images, the Cross slope (Camber) is a for LHS is shown as +2.5% from Left Median edge whereas the Cross slope for RHS is mentioned…